High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

Crestron Products

Crestron

Grid  List 

28 Item(s)

per page
  • Crestron CNMSX-Pro

    Crestron CNMSX-Pro

    Crestron CNMSX-Pro integrated control system module Learn More
    $79.00

  • Crestron CNAMPX-2X60

    Crestron CNAMPX-2X60

    Audiophile-grade 2 channel amplifier High-performance Class AB design Discrete high-current, bipolar output transistors Learn More
    $250.00

  • Crestron CNX-DVID8X24 Video Distribution Switch

    Crestron CNX-DVID8X24 Video Distribution Switch

    Crestron CNX-DVID8X24 Video Distribution Switch Learn More
    $799.00

  • Crestron CNXRMAK

    Crestron CNXRMAK

    The CNXRMAK is a 2-space rack mount kit that is used to install up to three Crestron C2N-HBLOCK Cresnet distribution blocks or three CNPWS-75 Cresnet power supplies (or any combination thereof) into a 19-inch EIA equipment rack. Includes (1) black metal 2U rack mounting panel and (12) 6-32 device Learn More
    $50.00

  • Crestron CNXRMCLV

    Crestron CNXRMCLV

    Crestron CNXRMCLV is a home solution box for audio/video distribution Learn More
    $99.00

  • Crestron CNXBIPAD8

    Crestron CNXBIPAD8

    Crestron CNXBIPAD8 Crestron Cnx-bipad8 Cat5 Audio Distribution Processor 16 Sources to 8 Outputs. Learn More
    $299.00

  • Crestron IADS30X24

    Crestron IADS30X24

    Crestron IADS30X24 intercomm audio distribution switcher Learn More
    $199.00

  • Crestron CNAMPX 12 X 60 multi channel power amplifier

    Crestron CNAMPX 12 X 60 multi channel power amplifier

    Crestron CNAMPX 12 X 60 multi channel power amplifier Learn More
    $600.00

  • Crestron CNRFGWA RF receiver

    Crestron CNRFGWA RF receiver

    Crestron CNRFGWA RF receiver we have two at present price is for each unit Learn More
    $199.00

  • Crestron CEN-IPOD

    Crestron CEN-IPOD

    Crestron CEN-IPOD Ipod docking station Learn More
    $99.00

  • Crestron CNXRMC

    Crestron CNXRMC

    Crestron CNXRMC Crestron Cnxrmc Room Solution Box Cat5 Video Receiver & Control Learn More
    $49.00

  • Crestron STRFGWX

    Crestron STRFGWX

    Crestron STRFGWX RF transceiver Learn More
    $79.00

  • Crestron CNX PAD 8A

    Crestron CNX PAD 8A

    Crestron CNX PAD 8A is a high performance 8X8 audio switcher Learn More
    $199.00

  • Crestron Pro-2

    Crestron Pro-2

    Crestron Pro-2 Professional dual bus control system processor Learn More
    $299.00

  • Crestron ST-PC

    Crestron ST-PC

    2 AVAILABLE The ST-PC is a Cresnet® expansion module that provides switching of AC power to two individual loads for on/off control of video monitors, tape decks, small audio amplifiers, and other AC powered devices. The ST-PC may be used to provide a power control interface wherever required for loads up to 1200 Watts, and may be rack-mounted using the optional ST-RMK rack mount kit (sold separately). Communication with the control system is via a single Cresnet connection. POWER A – B (2) 3-prong grounded AC sockets, switched AC power outlets; Maximum Load per Outlet: 10 Amps at 120 Volts AC tungsten load; Maximum Load Total: 10 Amps at 120 Volts AC POWER IN (1) 6 ft (1.83m) cable with grounded AC plug; Connects to AC power source NET (2) 6-pin RJ11 female, Cresnet slave ports, paralleled; Connect to Cresnet control network 12VDC (1) 2.5mm barrel DC power jack 12 Volt DC power input (PW-1205 power pack included) Controls & Indicators PWR (1) green LED, indicates power supplied from Cresnet network or local power pack NET (1) amber LED, indicates communication with Cresnet system POWER A – B (2) pushbuttons and red LEDs; pushbuttons toggle each corresponding power outlet on/off when control system is inactive, or function as programmable pushbuttons when control system is active; LEDs indicate when corresponding outlet is on Power Requirements Power Pack 0.5 Amp @ 12 Volts DC; 120 Volts AC, 60 Hz power pack, model PW-1205, included Cresnet Power Usage 4 Watts (0.167 Amp @ 24 Volts DC) with no power pack connected Learn More
    $999.00

  • Crestron Cresnet 2 MS

    Crestron Cresnet 2 MS

    Integrated Control system Applications: Board Room, Teleconferencing, Lighting Control, Home Theaters Low cost packaged control system ideal for small to medsize applications 6 IR/Serial/RS-232 ports 8 switch/contact inputs or solid state outputs Expandable through 2 Cresnet II control card slots External 75w, 120V power supply required but not included Dimensions: Height: 3 1/2 " Width: 19 " Depth: 10 " Weight: 5 lbs Learn More
    $99.00

  • Crestron CNXPAd8

    Crestron CNXPAd8

    Crestron CNXPAd8 Professional audio distribution processor Learn More
    $179.00

  • Crestron C2N DAP8RC

    Crestron C2N DAP8RC

    Crestron C2N DAP8RC 7.1 Surround Sound Processor and Room Solution Box we have more than one price is for each unit Learn More
    $599.00

  • Crestron SWAMPE-8
    $999.00

  • Crestron CTP-3000EL Touch Panel
    $999.00

  • Crestron STX-3500C 2 Way Wireless RF Touch panel

    Crestron STX-3500C 2 Way Wireless RF Touch panel

    Crestron STX-3500C Summary Of Features up to 16 touchpanels per transceiver operates on the Cresnet® control network choose from 5.7" color and 9.4" grayscale and 10.4" XtraBrite active matrix display adjustable tiltcase design power options include rechargeable power packs and Cresnet network wire 1000-foot range, even through walls spread spectrum RF technology for constant, uninterrupted control design dynamic graphic touchpanel pages with Crestron's VisionTools™ Pro touchpanel design software Learn More
    $999.00

  • Crestron Professional Intercom Distribution Switcher C2N-IADS30X24

    Crestron Professional Intercom Distribution Switcher C2N-IADS30X24

    Crestron Professional Intercom Distribution System-Audio C2N-IADS30X24 The C2N-IADS30X24 Intercom Audio Distribution Switcher facilitates the distribution and control of audio intercom signals for up to 22 TPS touchpanels and door stations using inexpensive CAT5E cable. The C2N-IADS30X24 integrates neatly with Crestron's CNX-PAD8A and CNX-BIPAD8 audio distribution processors, enabling voice paging from any microphone-equipped touchpanel to room loudspeakers throughout the house or office, and allowing audio from central AV sources to be distributed to any touchpanel. The C2N-IADS30X24 is built around a fully programmable 30 X 24 audio crosspoint matrix, providing extensive flexibility for the distribution of intercom and other monaural audio signals. Interfaced through 22 bidirectional CAT5 audio ports, the matrix provides complete freedom to route the microphone signal from any one touchpanel or door station to the speakers in another, with real-time control to permit fluid talk/listen (half-duplex) intercom functionality. Crestron offers several touchpanel models equipped with built-in microphones and speakers designed for use with the C2N-IADS30X24. Door stations are easily implemented using the C2N-IIF Intercom Interface (sold separately). Eight unbalanced inputs are also provided to accept signals from the unbalanced room outputs or loop-thru connectors of a Crestron audio distribution processor, or from any stereo sources. Stereo input signals are internally summed to mono. Any input signal may be freely routed to any number of CAT5 outputs. In addition, there are two unbalanced outputs provided for connection to room inputs on the audio distribution processor, allowing microphone and other signals to be routed to any set of room speakers, easily accommodating the most complex zone-paging scheme. Additional configurations can be achieved by interfacing CAT5 audio ports on the C2N-IADS30X24 directly to CAT5 audio ports on the CNX-BIPAD8 and many other Crestron products. A 5-pin connector, paralleled with last CAT5 I/O port, permits interfacing to Crestron's CEN-TIA Telephone Interface Module (sold separately), enabling dial-up paging through the client's phone system, and distribution of door chimes and other sounds through the room loudspeakers. The C2N-IADS30X24 functions as a slave device to any 2-Series control system communicating via the Cresnet control network. Learn More
    $999.00

  • Crestron Professional Media Controller MC2E

    Crestron Professional Media Controller MC2E

    Crestron MC2E Crestron® 2-Series Control Systems are the brain of a complete integrated AV or automation solution. Every audio, video, and environmental element of the home, boardroom, classroom, or command center becomes integrated and accessible through the control system. Crestron 2-Series control systems are unmatched for power, performance and scalability, providing the ideal choice for today's demanding control applications. The MC2E is a low-cost 2-Series Ethernet control system ideally suited for any application requiring the powerful control engine and Ethernet connectivity of larger Crestron control systems, but with fewer control ports. The MC2E features two built-in COM ports, four IR/Serial ports, four I/O Versiports, four isolated relays, and Ethernet for control of video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. Additional control ports may be added using Cresnet expansion modules, or by "slaving" additional control processors. 2-Series Eng Memory SDRAM 32 MB NVRAM 256 KB Flash 4 MB Operating System Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL Windows™ and SIMPL+® Ethernet 10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications Connectors COM A - B (2) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k baud; Hardware and software handshaking support; All ports support C2N-NPA8 Network Poll Accelerator INFRARED-SERIAL OUTPUT A - D (4) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port, allowing simultaneous firing of all ports I/O Versiports 1 - 4 (1) 5-pin 3.5mm detachable terminal block comprising (4) digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms; Programmable 5 Volts, 2k ohms pull-up resistor per pin RELAY OUTPUT 1 - 4 (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts IR IN (1) 3-pin 3.5mm detachable terminal block; For connection of the CNXRMIRD IR Receiver (sold separately); Allows IR wireless control from Crestron or third-party remotes using RC-5 IR commands LAN (1) 8-wire RJ45 with 2 LED indicators; 10/100BaseT Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity COMPUTER (1) DB9 female, RS-232 computer console port NET (1) 4-pin 3.5mm detachable terminal block; Cresnet port, Master/Slave selectable; Expandable via C2N-NPA8 Network Poll Accelerator 24VDC (1) 2.1mm barrel DC power jack, 24 Volt DC power input; (PW-2420RU power pack included); Passes through to NET port to power Cresnet devices Reset Buttons HW-R Hardware reset (reboots the control system) SW-R Software reset (restarts the SIMPL program) LED Indicators PWR (1 green) Indicates DC power supplied to unit NET (1 yellow) Indicates Cresnet bus activity MSG (1 red) Indicates control system has generated an error message LNK (1 red) Indicates a valid connection on LAN port ACT (1 red) Indicates activity on LAN port Power Requirements Power Pack 2.0 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included Available Cresnet Power 38 Watts using PW-2420RU power pack (included) Cresnet Power Usage 12 Watts (0.5 Amp @ 24 Volts DC) using Cresnet network power (no power pack connected to the 24VDC connector) Environmental Temperature 41° to 113°F (5° to 45°C) Humidity 10% to 90% RH (non-condensing) Enclosure Chassis Metal, black matte finish Faceplate Extruded aluminum, black matte finish with polycarbonate label overlay Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) Dimensions Height 1.80 in (46 mm); 1.70 in (44 mm) without feet Width 17.03 in (433 mm); 19.0 in (483 mm) with ears Depth 8.65 in (220 mm) Weight 4.3 lbs (2.0 kg) Learn More
    $299.00

  • Crestron CT-3500 Color Touch Large Screen

    Crestron CT-3500 Color Touch Large Screen

    Crestron CT-3500 Crestron CT-3500 ColorTouch Active Matrix Large Screen Touchpanel Description/Overview from Crestron Applications: The ColorTouch CT-3500 is ideally suited to applications where a bright, responsive, color touchscreen control panel is needed: boardrooms teleconferencing conference centers information display centers command and control centers residential systems control Benefits: The Crestron XtraBrite ColorTouch is another example of how Crestron continues to set new standards within the control industry. The XtraBrite touchpanel features the brightest touchscreen display in the industry and redefines quality and value in color touchscreen technology. The larger, brighter display is always clear ­ even in bright ambient light. Color control graphics, including imported art and photos, are sharp, even at extreme angles. There's plenty of design flexibility here, too. Using Crestron's exclusive VisionTools for Windows PC-based software, creatingcontrol screen layouts ­ complete with pop-up menus ­ is easy. Import your own icons, drawings, even photographs, in several popular file formats. Crestron is committed to providing the hardware, software and experienced support you need to fully customize your control environment. Features: 10.4 inch XtraBrite active matrix display increased memory multimedia options: microphone, audio playback, headphone jack design control panel pages with VisionTools for Windows supports Windows fonts import photos, icons, drawings foreign language text RS-232 interface for stand-alone applications operates on the Cresnet II Control System Network Learn More
    $999.00

  • Crestron Professional Balanced Audio Receiver CNX-PBAR4

    Crestron Professional Balanced Audio Receiver CNX-PBAR4

    Crestron CNX-PBAR4 The CNX-PBAR4 is designed for systems utilizing multiple CNX-BIPAD8 audio distribution processors to enable redistribution of audio return signals from up to four CNXRMCLV, C2N-DAP8, or C2N-DAP8RC room solution boxes. The CNX-PBAR4 installs at the head end and connects in line with the bidirectional CAT5 audio cables that run between the CNX-BIPAD8 and each remote room solution box. For each room, an unbalanced audio signal is extracted from the return feed to be connected to any available source input on the CNX-BIPAD8, allowing the return signal to be distributed to any other room as if it were another head end source. The CAT5 balanced room output signal from the CNX-BIPAD8 is passed directly through the CNX-PBAR4 to the room solution box without processing. The CNX-PBAR4 is designed for transparent operation and contains no adjustments or switching circuitry. The CNX-PBAR4 includes a dedicated external power pack and requires no connection to the Cresnet control network. The CNX-PBAR4 can also be used anywhere it is necessary to convert multiple Crestron® CAT5 balanced audio signals to feed conventional unbalanced line-level inputs. Learn More
    $999.00

  • Crestron Professional Balanced Video Receiver CNX-PBVR4

    Crestron Professional Balanced Video Receiver CNX-PBVR4

    Crestron Professional Balanced Video Receiver CNX-PBVR4 The CNX-PBVR4 is designed for use with CNX-PVID8X3 and CNX-PVID8X4 video distribution switchers to enable redistribution of video return signals from up to four CNXRMCLV or C2N-DAP8RC room solution boxes. The CNX-PBVR4 installs at the head end to convert the CAT5 return signals to standard RCA unbalanced, allowing each signal to be connected to any available input on the switcher so that it may be distributed to any other room as if it were another head end source. The CNX-PBVR4 can also be used anywhere it is necessary to convert multiple Crestron® CAT5 balanced video signals to feed conventional RCA type video inputs. The CNX-PBVR4 is designed for transparent operation and contains no switching circuitry. Video compensation adjustments are included to maximize the performance of video over CAT5. Learn More
    $999.00

  • Crestron Touch Panel 1550C

    Crestron Touch Panel 1550C

    Crestron 1550C with base Size 5.7 inch (145 mm) diagonal Aspect Ratio 4:3 QVGA Resolution 320 x 240 pixels Color Depth 8-bit, 256 colors Illumination Backlit fluorescent Viewing Angle ±50° horizontal, +40°/-50° vertical Touch Screen Resistive membrane Wireless RF Transmitter 433.92 (433) MHz 1-way RF Range Up to 300 feet typical, subject to site-specific conditions Gateway Requires a CNRFGWA or MC2W RF Gateway[1], maximum 16 touch panels per gateway Memory Flash 1 MB Maximum Project Size 768 kB Graphic Engine ColorTouch™ 256 colors Audio Built-in transducer for “key click” sound Connectors Power (1) 2.5mm barrel DC power jack; 12 Volt DC power input (PW-1215 power pack included) Cresnet Upload (1) 3.5 mm mini TRS phone jack; Connects to Cresnet control network while uploading only Battery Model/Type ST-BTPN battery pack, NiMH, 4.8 Volt, 4100 mAh Usage per Charge ~4.3 hours continuous use at full brightness, 20 hours in standby Charging Time 2.7 to 6 hours (depending upon use while charging) Power Requirements Power Pack 18 Watts (1.5 Amps) @ 12 Volts DC; 120 Volts AC @ 60Hz power pack, model PW-1215 included Environmental Temperature 50° to 113°F (10° to 45°C) Humidity 10% to 90% RH (non-condensing) Enclosure Construction High impact black/silver injection-molded case Dimensions Height 3.69 in (94 mm) Width 8.75 in (223 mm) Depth 5.42 in (138 mm) Weight 1.85 lbs (0.84 kg) – not including battery or docking station Learn More
    $300.00

  • CRESTRON ST-CP

    CRESTRON ST-CP

    CRESTRON CONTROL PROCESSOR Communications Radio Frequency (RF); 1-way; 434MHz Communication Ports RF (1) 50 ohms BNC connector; for use with antenna (included) alone or with standard 50 ohm extension cable (not included) NET (1) 6-wire RJ-type connector; for expansion to SmarTouch peripherals, Cresnet devices, touchpanels and for programming the SmarTouch touchpanel PC (1) 6-wire RJ-type connector for communicating to a PC computer when programming COM A - B (2) 6-wire RJ-type connectors for controlling audio/visual devices via independent RS-232 ports (data rate up to 38,400 baud) IR OUT A - D (4) RA, 3.5mm mini phone jacks for controlling additional audio/visual devices via IR, serial format; requires STIRP IR probe(s). The IR port can be used with TTL compatible serial interfaces/devices LED Indicators PWR Indicates 12 or 24VDC power supplied to unit NET Indicates command activity to Cresnet and SmarTouch peripherals or from PC RF Indicates commands received from user interface (i.e., touchpanel) ERROR Indicates programming problem COM A - B Indicates communications occurring from unit's COM ports IR A - D Indicates commands transmitted from unit's IR ports Power Requirements External, 12VDC, 500mA AC adapter; included Enclosure Black metal; stackable Rack Mountable With ST-RMK rack mount kit, not included Dimensions 1 rack unit high, 1/2 rack unit wide 1.7" / 4.32cm (H) x 7.07" / 17.95cm (W) x 6.32" / 16.06cm (D) Weight 2.0lbs (0.95Kg) Learn More
    $999.00

Grid  List 

28 Item(s)

per page