High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

Power Amplifiers

Grid  List 

Items 101 to 150 of 209 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page
  • Quicksilver Mono 100

    Quicksilver Mono 100

    Quicksilver Mono 100 unused since 2014 pair http://quicksilveraudio.com/wp-content/uploads/2017/07/Mono100Manual.pdf in 11/21 Learn More
    $2,300.00

  • Goldmund SR150 Stereo Power Amplifier

    Goldmund SR150 Stereo Power Amplifier

    Power output: 200 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 1000kHz Total harmonic distortion: 0.01% Input sensitivity: 0.75V Signal to noise ratio: 100dB Dimensions: 440 x 330 x 90mm Weight: 13kg Year: 2005 Learn More
    $2,300.00

  • Krell Altair

    Krell Altair

    Krell Altair Reference $5500 low profile amplifier with separate power supply from the 1990's. Original boxes Designed as a reference amplifier for apartment sized systems. Power suppy caps just recapped. IN REPAIR Learn More
    $2,370.00

  • Audio Research Model VT100 Stereo Power Amplifier

    Audio Research Model VT100 Stereo Power Amplifier

    Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 1Hz to 100kHz Total harmonic distortion: 1% Damping factor: 11 Gain: 23.5 dB Input sensitivity: 1.9V Signal to noise ratio: 95dB Speaker load impedance: 4Ω to 8Ω Valve complement: 8 x 6550C, 8 x 6922 Dimensions: 483 x 222 x 495mm Weight: 29.5kg Learn More
    $2,400.00

  • Krell KSA80 Balanced

    Krell KSA80 Balanced

    Krell KSA80B One owner all original excellent condition We can recap for $500 additional if desired before shipping. Later balanced version Learn More
    $2,400.00

  • Goldmund VSR Mono Power Amplifiers

    Goldmund VSR Mono Power Amplifiers

    Goldmund VSR Mononoblock Power Amplifiers Silver Faceplate Great Condition Learn More
    $2,495.00

  • Mark Levinson No. 27 Stereo Power Amplifier

    Mark Levinson No. 27 Stereo Power Amplifier

    Mark Levinson No. 27 Stereo Power Amplifier Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 4Hz to 122kHz Total harmonic distortion: 0.1% Gain: 26 dB Dimensions: 444.5 x 407.8 x 185.6mm Year: 1989 75Lbs Learn More
    $2,495.00

  • Threshold SA/3 Class A

    Threshold SA/3 Class A

    Threshold SA/3 50watt/channel Stasis Pure Class A Power Amplifier. This amplifier, designed by Nelson Pass and Built in the USA by Threshold employs pure Class A circuitry at every stage - there is no corrective feedback loop Learn More
    $2,500.00

  • Classe Sigma 5

    Classe Sigma 5

    Classe Sigma 5 $5000 USA retail nformation The Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages. A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes. The Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages. A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes. Specifications Details All tests un-weighted and 20Hz - 20kHz measurement bandwidth used. Frequency response 10Hz - 20kHz, -1dB into 4Ω Output power 200W rms into 8Ω All channels driven 400W rms into 4Ω Any two channels driven* Harmonic Distortion 0.018% @ 1kHz All channelsdriven to 1/8th power into 8Ω Peak Output Voltage 113V peak to peak, 40V RMS no load 113V peak to peak, 40V RMS into 8Ω Input Impedance 100kΩ Balanced / 50kΩ SE Voltage gain 29 dB Input level at clipping 1.4Vrms Balanced/SE Intermodulation Distortion >80 dB below fundamental into 8Ω SE Signal to Noise Ratio -100 dB at peak output into 8Ω (AES17) Rated power consumption 200W @ 1/8th power into 8Ω Mains voltage 100V - 240V, 50/60Hz Overall Dimensions Width: 17.00" (433mm) Depth (excluding connectors): 14.57" (370mm) Height: 3.75" (95mm) Net weight 23.1 lb (10.48 kg) *each channel supports 400W output into 4 ohms but the AC Mains/power supply cannot support all channels driven simultaneously at this level, which would require over 2,500W and only occur under a special test condition. Every channel easily drives lower impedance loads. Learn More
    $2,500.00

  • Cinenova 7 seven channel

    Cinenova 7 seven channel

    Cinenova 7 seven channel in 4/22 Learn More
    $2,500.00

  • Mcintosh MC7150 Digital Dynamic Stereo Power Amplifier sold ?
    $2,500.00

  • Goldmund Mimesis 10
    $2,500.00

  • Crown Reference 1

    Crown Reference 1

    Crown Reference 1 in service 9/21 Inquire before purchasing Reference I (120 V, 60 Hz models) The Crown® Studio Reference I power amplifier shall be a solid-state two-channel model employing multi-mode (AB+B) grounded bridge(TM) output circuitry with a variable impedance (VZ) power supply for each channel. The outputs shall be switchable as stereo, bridged-mono or parallel-mono modes of operation. The bridged-mono mode shall bridge the outputs to provide increased output voltage. The parallel-mono mode shall parallel the outputs to provide increased output current. The output impedance of each channel shall be less than 10 milliohms in series with less than 2 microhenries in stereo mode. The variable impedance power supplies shall reduce unnecessary voltage across the output devices by automatically switching to a parallel mode when less voltage is required by the output circuitry and to a series mode when more voltage is required. The amplifier shall contain protection circuitry which limits the drive level placed on the output devices before their SOA (Safe Operating Area) is exceeded. This protection circuitry shall calculate the instantaneous voltage across and current through the output devices while factoring in their simulated junction temperatures to predict how close they are to their operating limits. This protection will be called “ODEP.” The amplifier shall contain controlled slew-rate voltage circuitry to protect it against radio frequency interference burnouts. It shall also be protected from current overload at its output stage. The slew rate of the amplifier shall be greater than 30 volts per microsecond in stereo mode. The amplifier shall temporarily go into a stand-by mode if its power transformer becomes excessively hot and shall automatically resume normal operation once it has cooled to a safe operating temperature. Front-panel controls shall include an enable on/off switch and a detented input level control for each channel. Rear-mounted controls shall include a ground lift switch to isolate the signal ground from the chassis ground, a switch which selects between stereo, bridged-mono and parallel-mono modes of operation and a reset switch for the AC mains circuit breaker. Internal controls shall include an input sensitivity switch to select between 0.775 V, 1.4 V or a fixed voltage gain of 26 dB for full rated output. A Crown P.I.P. and P.I.P.2-compatible expansion connector shall be provided behind an access panel in the rear to accept auxiliary input modules. It shall be fully compatible with the Crown IQ System. Front panel indicators shall include an amber power enable indicator, an amber ODEP protection system indicator for each channel which shall normally be illuminated to confirm the availability of reserve thermodynamic energy and which shall dim in proportion to limiting when the power demands of the output stages have been exceeded, a green IOC indicator for each channel, and a green Signal indicator for each channel which shall normally flash at moderate intensity to show the presence of an audio signal. The power amplifier shall meet or exceed the following performance criteria. Input sensitivity for rated output: 26 dB voltage gain (unbalanced). Rated FTC output in stereo mode with less than 0.1% THD: 780watts per channel (20 Hz to 20 kHz) into 8 ohms. Hum and noise: at least 120 dB (A weighted) below full rated output power. Phase response: +5 to –15 degrees from 20 Hz to 20 kHz at 1 watt. Frequency response: 20 Hz to 20 kHz, 0.1 dB at 1 watt into 8 ohms per channel in stereo mode. Damping factor: greater than 20,000 from 10 to 200 Hz into 8 ohms. Intermodulation distortion (SMPTE): less than 0.005% from full bandwidth power to 78 watts rising linearly to better than 70 dB at 20 kHz. Harmonic distortion: less than 0.02% at rated low-distortion 1 kHz power. The amplifier shall be safe when driving any kind of load—even highly reactive ones. The power requirements shall be 120 VAC at 60 Hz. At idle, the amplifier shall draw 90 watts or less. The amplifier chassis shall be constructed of steel with a durable black finish and shall be designed for flow-through fan-assisted ventilation from the front panel to the side panels. The amplifier shall have an aluminum front panel with super-gloss Imron finish and Lexan overlay. The dimensions of the amplifier shall allow for 19 inch (48.3 cm) EIA standard (RS- 310-B) rack mounting. The amplifier shall be 7 inches (17.8 cm) tall, 16 inches (40.6 cm) deep behind the rack-mounting surface, and 2.75 inches (7 cm) in front of the rack-mounting surface. The amplifier shall weigh 60 pounds, 11 ounces (27.6 kg) and shall have a center of gravity approximately 6 inches (15.2 cm) behind the front panel. The amplifier shall be designated the Crown Studio Reference Learn More
    $2,500.00

  • Krell FPB250M mono EACH AMP

    Krell FPB250M mono EACH AMP

    Krell FPB250M excellent like new cosmetics Recapped! factory boxes MULTIPLE AVAILABLE Power output: 250W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Gain: 26.4 dB Input sensitivity: 2.14V Signal to noise ratio: 114dB Dimensions: 318 x 267 x 406mm Weight: 31kg Learn More
    $2,600.00

  • Mcintosh MC2505

    Mcintosh MC2505

    Mcintosh MC2505 in beautiful condition, one owner in 3/23 New box and packing ordered from Mcintosh 3/23 optional wood case pictured $350 additional plus shipping Learn More
    $2,600.00

  • Mark Levinson 23 recapped 100v (Japan ideally)  sold ?

    Mark Levinson 23 recapped 100v (Japan ideally) sold ?

    excellent condition Mark Levinson 23 200 watt/channel amplfiier, 100V set at present, can be changed Description: Solid-state stereo power amplifier. Rated power output: 200Wpc continuous into 8 ohms (23dBW) with less than 0.1% THD, 400Wpc continuous into 4 ohms (23dBW) with less than 0.2% THD, both from 20Hz–20kHz, both channels driven. Damping factor: greater than 600 at 50Hz, 8 ohms (equivalent to an output impedance of 0.013 ohms). Frequency response: 4Hz–140kHz, —dB. Input impedance: 50k ohms shunted by 1.5nF. Voltage gain: 26dB (load not defined). Input sensitivity: 141mV for 1W output. Dimensions: 19" (483mm) W by 8.25" (210mm) H by 15.7" (399mm) D. Shipping weight: 105 lbs (48kg). Learn More
    $2,700.00

  • Devialet Expert 200

    Devialet Expert 200

    Devialet Expert 200, original box/packing, excellent condition Learn More
    $2,700.00

  • Audio Research VS110

    Audio Research VS110

    Audio Research VS110 2 available price is for each unused since 2014 in 11/2021 Given the enthusiastic response to the appearance and sonic peformance of the VS55, you will be happy to know that a more powerful version of this remarkable amplifier is now available: the VS110, rated at 100 WPC. This brings vacuum-tube musicality as only Audio Research can do it to a new power level and price. The chassis, circuit layout and feature set of the VS110 are almost identical to the VS55, but scaled up to accomodate the greater power output. The chassis itself measures 17 ½" W by 19" D, and features an anodized, natural-finish top plate labeled with tube location/type, output-tube bias access points and the inset Audio Research logo. The chassis front holds a rocker-style power switch and green LED "on" indicator. The chassis rear provides the 0-4-8 ohm 5-way binding posts, voltmeter test points for setting bias, a 12V in/out trigger and a detachable 14-gauge A.C. line cord with IEC socket. There are two matched pair of 6550C output tubes in each channel, fed by two 6NIP triode driver/followers, which in turn are fed by a single 6NIP input tube. Storage capacity of the bulk power supply is double that of the VS55 and uses the same type of fast, low-ESR Nichicon® capacitors. The simplicity and purity of the audio circuit is a proven performer, but now it can deliver more power for larger speakers in larger rooms. Like the VS55, the VS110 ships in one color /chassis configuration, black with natural anodized top plate. A perforated cage-type cover is optional, and must be ordered as a separate item. The sonic signature of the VS110 is very much like that of the VS55, but with more robust dynamics, greater bass impact and power, and a larger soundstage. With so much similarity between these two amplifiers, choosing the right amplifier is simple. The look, the feature set, the circuit types are identical: it is simply a question of how much power you need or want. The VS110 combines classic tube-amplifier appeal with robust power, genuine musicality and solid value. And don't forget Audio Research's unmatched record for long-term product support - a key measure of keeping customers satisfied, decade after decade. POWER OUTPUT 100 watts per channel continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 0.5% at 100 watts, below .05% at 1 watt. Approximate actual power available at "clipping": 120 watts (1kHz) (Note that the actual RMS power output is dependent upon both line voltage and "condition" ie: if power line has high distortion, maximum power will be affected adversely, although from a listening standpoint this is not very critical.) POWER BANDWIDTH (-3dB points) 10Hz to 40kHz FREQUENCY RESPONSE (-3dB points at 1 watt) 0.8 Hz to 40 kHz INPUT SENSITIVITY 1.1V RMS Single-ended for rated output. (28dB gain into 8 ohms) INPUT IMPEDANCE 100K ohms Single-ended OUTPUT TAPS 8 ohms, 4 ohms OUTPUT REGULATION Approximately 0.9dB 8 ohm load to open circuit OVERALL NEGATIVE FEEDBACK 12.7dB DAMPING FACTOR Approximately 11 DISTORTION 1kHz total harmonic distortion typically 0.5% at 100 watts, below .05% at 1 watt SLEW RATE 6 V/µs RISE TIME 10 µs HUM & NOISE Less than 0.2mV RMS - 103dB below rated output (IHF weighted, input shorted) POWER SUPPLY ENERGY STORAGE Approximately 332 joules POWER REQUIREMENTS 105-125VAC 60Hz (210-250VAC 50Hz) 620 watts at rated output, 900 watts maximum, 400 watts at "idle" TUBE COMPLEMENT (4 matched pairs) 6550EH power output, (5) 6N1P input and driver OTHER Output polarity: Non-inverting. Voltmeter test points for bias. 12 VDC in/out trigger. Detachable 14 gauge AC line cord with IEC socket. DIMENSIONS 17½" (44.5 cm) W x 7.9" (20.1 cm) H x 19" (48.3 cm) D. Rear connectors extend .88" beyond chassis WEIGHT 61 lbs. (27.7 kg) Net; 69 lbs. (31.4 kg) Shippin Learn More
    $2,750.00

  • Mark Levinson 332

    Mark Levinson 332

    Mark Levinson 332 picked up 1/22 from original owner Learn More
    $2,799.00

  • Anthem P2

    Anthem P2

    Anthem P2 retail $4500 in very good condition Learn More
    $2,800.00

  • Mcintosh MC7270   three  available inquire

    Mcintosh MC7270 three available inquire

    Mcintosh MC7270 One in excellent 8/22 One in service 6/22 awaiting new factory glass, main output filter caps will be changed out also. Original box from Mcintosh if shipped, inquire for freight cost Too fragile for Fedex or UPS ground. Learn More
    $2,850.00

  • Balanced Audio Technology VK-250

    Balanced Audio Technology VK-250

    Balanced Audio Technology VK-250, excellent condition Learn More
    $2,899.00

  • Mark Levinson 331

    Mark Levinson 331

    Mark Levinson 331 recently serviced by factory authorized center Learn More
    $2,900.00

  • Krell Theater Amp Standard

    Krell Theater Amp Standard

    Krell Theater Amp Standard , detachable cord, black, recapped five years ago Learn More
    $2,900.00

  • Krell KMA-100 MK2 Monoblocks

    Krell KMA-100 MK2 Monoblocks

    Krell KMA-100 MK2 Monoblocks Class A 100W/Channel Silver Learn More
    $2,950.00

  • Goldmund 8.5 with a2 modules
    $2,950.00

  • Parasound Halo A51 5 Channel Power Amplifier

    Parasound Halo A51 5 Channel Power Amplifier

    Parasound Halo A51 5 Channel Power Amplifier Silver Designed by John Curl Continuous power output: 250 watts RMS 8 Ω 400 watts RMS 4 Ω THX Ultra 2 Dimensions - 17-1/2" w x 7-5/8" h x 20" d, 7" h Weight: 80 lb. Learn More
    $2,995.00

  • Plinius SA102

    Plinius SA102

    Plinius SA102 One owner, all excellent condition Learn More
    $2,999.00

  • B&K Reference 200.7

    B&K Reference 200.7

    B&K Reference 200.7 Looks like new old stock. Original box/packing 200 Watts/channel 76lbs Learn More
    $2,999.00

  • Krell FPB350m single mono
    $2,999.00

  • VTL MB-125 Monoblock Power Amplifier Pair

    VTL MB-125 Monoblock Power Amplifier Pair

    Power output: 100 watts (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 3% Signal to noise ratio: 95dB Speaker load impedance: 2Ω to 8Ω Valve complement: 4 x EL34, 2 x 12AT7 Dimensions: 400 x 300 x 180mm Weight: 22kg Learn More
    $3,000.00

  • Mcintosh MC2002 Stereo Power Amplfier

    Mcintosh MC2002 Stereo Power Amplfier

    Mcinttosh MC2002 200 watt channel must truck , if not local box must be ordered from Mcintosh Learn More
    $3,000.00

  • Krell KSA 200B Stereo Power Amplifier

    Krell KSA 200B Stereo Power Amplifier

    Inputs: RCA and Balanced Power output: 200 watts per channel into 8Ω (stereo); 400w/ch into 4 ohms, 800w/ch into 2 ohms and 1600w/ch into 1 ohm Learn More
    $3,000.00

  • Krell S-1500 5 Channel Amplifier

    Krell S-1500 5 Channel Amplifier

    Krell S-1500 Silver or (Black recapped) 5 Channel Amplifier Very Good Condition Original Box Based on a rock solid, linear power supply design, the S –1500 is virtually impervious to speaker demand or AC line fluctuations. A 1,500 VA toroidal transformer and robust, 80,000-microfarad array of quick -charging filter capacitors offer enormous energy storage, avail- able in an instant. This supply is designed for massive current delivery while maintaining an ultra-low noise profile. Surface mount technology is utilized in the amplifier channels to achieve the high circuit density required for wide bandwidth performance. Eight high- speed power devices per channel deliver 150 W into 8 Ohms and 300 W into 4 Ohms. The amplifier is stable at any load impedance. Krell Current Mode TM, fully balanced topologies, are utilized for all amplifier channels for the lowest noise and greatest detail retrieval. Class A circuitry is utilized in the input, pre -driver, and driver stages to provide the most accurate signal path. All channels support balanced and single -ended inputs. High quality, 5-way binding posts allow speaker connections via bare wires, spade lugs, or banana plugs. A modular platform provides an upgrade path for the S–1500/3, S –1500/5 and S –1500/6 amplifiers, enabling additional channels to be installed at any time. The base platform includes input and speaker connections for up to 7 channels, making upgrades a simple matter when desired. • 80,000 Microfarads of Filter Capacitance • 12 VDC Triggers • 17.3W,5.7H,19.8D Learn More
    $3,000.00

  • Krell KSA150

    Krell KSA150

    Krell KSA150 fresh recap on one 12/23 2 available the other not recapped excellent cosmetics on that one. Learn More
    $3,100.00

  • Krell S-1500 7 channel  Freshly recapped, six month warranty

    Krell S-1500 7 channel Freshly recapped, six month warranty

    Krell S-1500 7 channel Freshly recapped, six month warranty, with all updates, Excellent cosmetics Learn More
    $3,100.00

  • Mark Levinson 383 integrated with remote

    Mark Levinson 383 integrated with remote

    Mark Levinson 383 with remote two available as of 6/23 Learn More
    $3,100.00

  • Jeff Rowland Research Model 3 Monoblock Pair
    $3,150.00

  • Music Reference RM200 MK II
    $3,250.00

  • Mark Levinson No. 27.5  Stereo Power Amplifier

    Mark Levinson No. 27.5 Stereo Power Amplifier

    Mark Levinson No. 27.5 Stereo Power Amplifier Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 4Hz to 122kHz Total harmonic distortion: 0.3% Gain: 26.9 dB Dimensions: 483 x 185 x 360mm Weight: 43.1kg Year: 1992 Learn More
    $3,395.00

  • Krell FPB300
    $3,500.00

  • Krell Evolution 400 Mono Amplifier
    $3,500.00

  • Balanced Audio VK75SE
    $3,500.00

  • Spectral DMA-180 Stereo Power Amplifier

    Spectral DMA-180 Stereo Power Amplifier

    Spectral DMA-180 Stereo Power Amplifier Power Output: (continuous) @ 8 ohms - 200 Watts RMS @ 4 ohms - 400 Watts RMS @ 2 ohms - 683 Watts RMS Output Current: 60 Amps peak per channel Frequency Response: ±0.1 dB, DC-150 KHz ±1 dB, DC-1 MHz ±3 dB, DC-1.8 MHz Distortion: Static: Less than 0.015% from DC to 100 KHz Typically 0.009% @ 200 WRMS/8 ohms Dynamic: 8 Tone Cluster Test 20 KHz @ 500 Hz separation; 0.01% 8 ohms; 0.015% 4 ohms Speed: Rise Time: Less than 400 nanoseconds Settling: 1.5 microseconds to -40dB Slew Rate: 600 volts/microsecond Noise: Signal to Noise: 97dB unweighted, 107dB ASA A Crosstalk: 98dB @ full power 8 ohms Input: Impedence: 100K ohms in parallel with 100 pf Sensitivity: 1.5 volts/nominal output Power Supply: Line Voltage: 100 volts, 120 volts, 240 volts (internal wiring) AC Voltage Range: ±10% Maximum Consumption: 1600 Watts Quiescent Consumption: 250 Watts Operating Temp: 0° to 50° Celsius range; 32° to 122° Farenheit Protection Features: DC Protection Servo: 0.5 volt range Current Limit Onset: 40 Amps Thermal Protect Threshold: 85° Celsius, 185° Farenheit AC Main Fuses: 2 @ 4A 3AG slo-blo, for 100 - 120 VAC, 2 @ 2A 3AG slo-blo, for 220 - 240 VAC Fuse Status: LED indicator (2) Size and Weight: Dimensions: 48cm (19")W x 17cm (6 1/4")H x 48cm (19")D Weight: 60 lbs, 27.2 KG Net Learn More
    $3,500.00

  • Krell FPB350mcx mono single amplifier ONE AMP ONLY

    Krell FPB350mcx mono single amplifier ONE AMP ONLY

    Krell FPB350mc one mono amp only excellent condition best shipped by truck, inquire Learn More
    $3,500.00

  • VTL MB300 monoblocks rebuilt

    VTL MB300 monoblocks rebuilt

    VTL MB300 monoblocks, price per pair Rebuilt by Blackie Pagano with paperwork. Work well Description: Tubed monoblock power amplifier. Rated power: 300W (no load specified). Power bandwidth: not specified. Frequency response: not specified. Sensitivity: 775mV RMS. Source impedance: 0.1 ohm. Dimensions: 19" W by 10" H by 10" D. Weight: 75 lbs each. Learn More
    $3,650.00

  • Jadis Defy 7 in repair

    Jadis Defy 7 in repair

    Jadis Defy 7 will not ship until mid 2023 in repair, needs new transformer Learn More
    $3,700.00

  • Jeff Rowland Model 7 series mono amplifiers (two pairs in service)

    Jeff Rowland Model 7 series mono amplifiers (two pairs in service)

    Jeff Rowland Model 7 two pairs in service 1/24 inquire. one pair silver, one pair The shipping must be quoted. Please send you postal code. Learn More
    $3,700.00

  • Krell KSA250 improved

    Krell KSA250 improved

    Krell KSA250 with KSA300s internal boards overhaul completed 8/23 Learn More
    $3,700.00

  • Air Tight ATM1 with brand new tube set

    Air Tight ATM1 with brand new tube set

    Air Tight ATM1 with brand new tube set tube set in new in the box, not the ones in the picture. Learn More
    $3,800.00

Grid  List 

Items 101 to 150 of 209 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page