High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

Power Amplifiers

Grid  List 

34 Item(s)

per page
  • Krell (all models)

    Krell (all models)

    We are authorized dealers for all Krell products. Please inquire about any product. Learn More
    $999,999.99

  • Mcintosh 303

    Mcintosh 303

    Mcintosh 303 Approximately two years old, like new, all packing ELECTRONIC SPECIFICATIONS POWER OUTPUT PER CHANNEL 300W @ 2, 4 or 8 Ohms NUMBER OF CHANNELS 3 TOTAL HARMONIC DISTORTION 0.005% S/N BELOW RATED OUTPUT 112dB DYNAMIC HEADROOM 1.8dB DAMPING FACTOR >40 RATED POWER BAND 20Hz to 20kHz FREQUENCY RESPONSE +0, -0.25dB from 20Hz to 20,000Hz +0, -3dB from 10Hz to 100,000Hz CONTROL REMOTE POWER CONTROL Yes MULTI-CHANNEL DB25 CABLE No GENERAL SPECIFICATIONS CIRCUIT CONFIGURATION Push-Pull Complementary Autoformers CIRCUIT DESIGN Transistor MONO BRIDGE No MONO PARALLEL No AUTOFORMER Yes METERS Yes METER LIGHT SWITCH Yes BALANCED INPUT Yes FRONT PANEL Glass with handles ILLUMINATION LED Fiber Optic CHASSIS STYLE Inverted GOLD PLATED BINDING POSTS Yes WEIGHTS & DIMENSIONS DIMENSIONS (W X H X D) 17-3/4" (45.09cm) x 12-3/8" (31.43cm) (including feet) x 22" (55.88cm) (including front panel and cables) Learn More
    $7,200.00

  • Krell Chorus 5200

    Krell Chorus 5200

    Latest model. Exchanged for 7200, like new condition $8500 retail Learn More
    $5,900.00

  • Classe CA5300

    Classe CA5300

    Classe CA5300, as new, all packing, two available • The CA-5300 is one of the more beautiful looking multi-channel amps on the market today, which is good news for those of you with exposed equipment racks. • The CA-5300's 300 Watts of power should be more than enough for even the most demanding loudspeakers. • The CA-5300's sound is one of control, finesse and detail and isn't one that is keen on losing its composure. If you have difficult to drive or somewhat forward sounding loudspeakers, the CA-5300 should fit the bill nicely. Power output: 300W (5 channel) Frequency response: 1Hz to 80kHz Total harmonic distortion: 0.004% Gain: 29 dB Input sensitivity: 1.88V Signal to noise ratio: 116dB Dimensions: 444 x 572 x 223mm Weight: 47.7kg Learn More
    $5,500.00

  • Bryston 9BSST2

    Bryston 9BSST2

    Bryston 9BSST2 13 years warranty remaining, excellent with box Design: Solid State Power Amplifier Output: 140 Watts RMS x 5 into 8 Ohms, 200 watts into 4 Ohms Modular Design, Each Channel with 30,000 µF of Power Supply Capacitance MFR: Not Specified Sensitivity: 1.1 V for Full Output into 8 Ohms Input Impedance: 50 kOhms Single Ended; 20 kOhms Balanced THD+N: 0.005% 20 Hz – 20 kHz S/N: 116 dB Dimensions: 5.25″ H x 19″ W x 19″ D Weight: 76 Pounds Learn More
    $4,500.00

  • Cello Trio 3 channel amplifier

    Cello Trio 3 channel amplifier

    Cello Trio 3 channel amplifier 200 watts / channel x 3 channels, rare Learn More
    $3,999.00

  • ca5200

    Classe Audio CA5200 5 channel power amplifier

    Listed conservatively at 200 watts per channel times five channels, the Classe Audio CA-5200 is what we could call a beast of an amplifier. It mainly operates as a traditional class AB amp but, at lower outputs, the Classe' engineers have figured out a way to make the amps run as a class-A amp (no pun intended), which reportedly reduces some of the noise associated with class AB switching, not that you can hear any audible noise when auditioning the Classe' CA-5200, as this power amp runs very, very quietly. The Toroidal transformer (the heart and soul of any good class AB amp) is custom-made and extra-beefy, yet the Classe' CA-5200 runs cool as a cucumber. Learn More
    $3,995.00

  • Krell S1500/7 seven channels

    Krell S1500/7 seven channels

    Krell S1500/7 seven channels in black, all new channel boards (this is where the wear and tear is) http://krellonline.com/assets/support/S-1500_Owners_Reference.pdf /5/6/7 Channel Modular Power Amplifier • 150 W, 300W (8, 4 Ohms) - S-1500/5-7 • 175 W, 350W (8, 4 Ohms) - S-1500/3 • Krell Current Mode™ •1.5 kW Toroidal Transformer • 80,000 Microfarads of Filter Capacitance • 12 VDC Triggers • 17.3 W, 5.7 H, 19.8 D, in. 43.9 W, 14.5 H, 50.3 D, cm Learn More
    $3,900.00

  • Krell 450mcx single mono

    Krell 450mcx single mono

    Krell 450mcx single mono just serviced. (this is a factory upgraded 350mc) Learn More
    $3,900.00

  • BAT Balanced Audio Technology VK6200  A BEAST OF AN AMP   two available, inquire  This listing is for a three channel in pic

    BAT Balanced Audio Technology VK6200 A BEAST OF AN AMP two available, inquire This listing is for a three channel in pic

    BAT Balanced Audio Technology VK6200 two channels onboard up to four available, inquire before purchasing THE ULTIMATE IN FLEXIBILITY In its two-channel configuration, the VK-6200 often outperforms reference-level audio amplifiers. In multichannel mode, it serves as an ideal solution for power bi-amping, tri-amping, or multi-room audio systems where exacting sound quality is required. Imagine matching a three-channel VK-6200 with our VK-655SE or REX II monoblocks to create a five-channel home theater. Or, apply the VK-6200 in a four-channel configuration for the ultimate in power bi-amping for two-channel stereo. Want to fully load the VK-6200 with six channels to create a standard-setting 6.1-channel theater? No problem. Such extraordinary versatility and rational upgrade path mean you’ll love the VK-6200 in every imaginable application. VK-6200 Amplifier Output per channel at 8Ω/4Ω 200W / 400W Conversion to Mono? 2,3,4,5 or 6 channels Output in Mono Configuration 8Ω/4Ω n/a Frequency Response 2Hz to 180kHz THD at full power 0.1% Input Impedance 50 kΩ Gain (Nominal into 8Ω) 23dB Balanced / 29dB Single-Ended Tube Complement n/a Number of Power Cords 1 Remote Control 12V Trigger Input & Output Power Consumption (Idle/Full Power) 80W/1800W (w/ 6 channels) Dimensions (WHD) Inches 19" x 10.5" x 23" Dimensions (WHD) mm 480 x 280 x 580 Weight 100 - 180 Lbs Learn More
    $3,200.00

  • Krell TAS Theater Amp Standard   110/220v/240v

    Krell TAS Theater Amp Standard 110/220v/240v

    Krell TAS Theater Amp Standard Price for each/two available in silver, one in black We can ship this in your desired voltage at no extra charge .Specifications Theater Amplifier Standard FREQUENCY 20 Hz to 20 kHz +0 dB, -0.09 dB RESPONSE 0.25 Hz to 170 kHz +0 dB, -3 dB SIGNALTO NOISE RATIO “A” WEIGHTED >110 dB TOTAL HARMONIC 1 kHz < 0.03% DISTORTION (THD) 20 kHz < 0.20% GAIN 25.8 dB INPUT IMPEDANCE 100 kOhms INPUT SENSITIVITY 2.05 Vrms OUTPUT VOLTAGE Peak to Peak 113 V RMS 40 V OUTPUT POWER EACH CHANNEL 8 Ohms 200 W 4 Ohms 400 W BRIDGED 8 Ohms 800 W POWER Standby 60 W CONSUMPTION Idle 170 W Max. 2500 W INPUTS 5 single-ended via RCA connectors 5 balanced via XLR connectors 5 via DB-25 connector OUTPUTS 5 amplifier channels via five-way binding posts REMOTE CONNECTORS 12 VDC Out (12 V trigger) via a 3.5 mm connector 12 VDC In (12 V trigger) via a 3.5 mm connector DIMENSIONS 17.3w x 9.8h x 17.0d in. 43.8w x 24.8h x 43.2d cm WEIGHT SHIPPING 110 lb., 50 kg UNIT ONLY 100 lb., 45.5 kg All operational features, functions, specifications, and policies are subject to change without notification. Learn More
    $3,199.00

  • Varian Techron 7700 1000 watt (same as Crown Macrotech 10000) $12000 retail  per channel

    Varian Techron 7700 1000 watt (same as Crown Macrotech 10000) $12000 retail per channel

    Varian Techron 7700 Wickedly powerful: 5000 watts/1ohm! , these are the same as the crown macrotech 10000.. These can drive 1/2 ohm loads! 2 available, 130lbs ea Crown Techron 7700 series 1000 watt/8ohm mono amplifiers, 5000 watt into 1 ohm, 37.8 amps/2ohms The upgraded version of this model is $20000 each. user/service manual: http://www.soundstage.com/revequip/transparent_referencexl.htm crown version literature: http://www.crownaudio.com/pdf/legacy/k10684.pdf Learn More
    $2,999.00

  • Krell KAV-3250

    Krell KAV-3250

    Krell KAV-3250 in silver, excellent working condition, We can ship this in your desired voltage FREQUENCY 20 Hz to 20 kHz +0 dB, -0.09 dB RESPONSE 0.25 Hz to 170 kHz +0 dB, -3 dB SIGNAL TO NOISE RATIO “A” WEIGHTED >112 dB TOTAL HARMONIC 1 kHz < 0.03% DISTORTION (THD) 20 kHz < 0.20% GAIN 25.7 dB INPUT IMPEDANCE 100 kOhms INPUT SENSITIVITY 2.32 Vrms OUTPUT VOLTAGE Peak to Peak 127 V RMS 45 V OUTPUT POWER EACH CHANNEL 8 Ohms 250 W 4 Ohms 500 W BRIDGED 8 Ohms 1000 W POWER Standby 35 W CONSUMPTION Idle 80 W Max. 2000 W INPUTS 2 single-ended via RCA connectors 2 balanced via XLR connectors OUTPUTS 2 amplifier channels via five-way binding posts REMOTE CONNECTORS 12 VDC Out (12 V trigger) via a 3.5 mm connector 12 VDC In (12 V trigger) via a 3.5 mm connector DIMENSIONS 17.3w x 5.6h x 17.1d in. 43.8w x 14.3h x 43.4d cm WEIGHT SHIPPING 74.0 lb., 33.5 kg UNIT ONLY 64.0 lb., 29.0 kg All operational features, functions, specifications, and policies are subject to change without notification. Learn More
    $2,750.00

  • Krell KAV1500 5 channel x 300 watts

    Krell KAV1500 5 channel x 300 watts

    Krell KAV1500 5 channel x 300 watts factory serviced by Krell in 2008, very few hours since then of use. 90 day warranty KAV-1500 Five-Channel Amplifier FREQUENCY RESPONSE SIGNAL TO NOISE RATIO "A" WEIGHTED TOTAL HARMONIC DISTORTION (THD) GAIN INPUT IMPEDANCE INPUT SENSITIVITY OUTPUT VOLTAGE OUTPUT POWER, EACH CHANNEL DRIVEN BRIDGED POWER CONSUMPTION INPUTS OUTPUTS DIMENSIONS WEIGHT 20 Hz to 20 kHz +0 dB, -0.2 dB 0.4 Hz to 112 kHz +0 dB, -3 dB 118dB 1 kHz < 0.06% 20 kHz < 0.25% 26.4 dB 100 kOhms 2.15 Vrms Peak to Peak RMS 8 Ohms 4 Ohms 8 Ohms Idle Max. 166 V 59 V 300 W 600 W 1,100 W 280 W 3,460 W 5 single-ended via RCA connectors 5 balanced via XLR connectors 5 via DB-25 connector 5 amplifier channels via five-way speaker binding posts 19w x 6.3h x 20.25d in. 48.3w x 16h x 51.4d cm Shipping 125 lb., 56.81 Learn More
    $2,500.00

  • Halcro MC50 5 channel amp

    Halcro MC50 5 channel amp

    Halcro MC50 Halcro has made big waves in the industry in a short period of time, including a Stereophile cover that glossed the Australian company's dm58, "The Best Amplifier Ever!" Ahem. How's that for an attention getter? Halcro's efficient, universal switch mode, power factor corrected amps would seem tailor made for home theater, and now the MC50 is here to prove it. Five channels rated (strangely) at 350-Watts into 4 ohms (and, I'm guessing, somewhat less into the more traditional 8 ohms) are on tap here in a box that's attractive if just a little less sci-fi than Halcro's high-end monoblocks. http://www.avrev.com/home-theater-power-amplifiers/multi-channel-amplifiers/halcro-mc50-multi-channel-power-amplifier-3.html Learn More
    $2,500.00

  • Krell Showcase 7

    Krell Showcase 7

    Krell Showcase 7 seven channel amplifier in black Showcase 7 Showcase 6 Showcase 5 FREQUENCY RESPONSE 20 Hz to 20 kHz 20 Hz to 20 kHz 20 Hz to 20 kHz +0 dB, -0.15 dB +0 dB, -0.15 dB +0 dB, -0.15 dB .2 Hz to 95 kHz .2 Hz to 95 kHz .2 Hz to 95 kHz +0 dB, -3 dB +0 dB, -3 dB +0 dB, -3 dB SIGNAL TO NOISE RATIO >110 dB >110 dB >110 dB “A” WEIGHTED GAIN 26.2 dB 26.2 dB 26.2 dB TOTAL HARMONIC 1 kHz < 0.03% 1 kHz< 0.03% 1 kHz < 0.03% DISTORTION (THD) 20 kHz < 0.20% 20 kHz< 0.20% 20 kHz < 0.20% INPUT IMPEDANCE 45 kOhms 45 kOhms 45 kOhms INPUT SENSITIVITY 1.55 Vrms 1.55 Vrms 1.55 Vrms OUTPUT POWER 8 Ohms 125 W 8 Ohms 125 W 8 Ohms 125 W EACH CHANNEL DRIVEN 4 Ohms 250 W 4 Ohms 250 W 4 Ohms 250 W OUTPUT VOLTAGE Peak to Peak 90 V Peak to Peak 90 V Peak to Peak 90 V RMS 32 V RMS 32 V RMS 32 V POWER CONSUMPTION Stand-by 90 W Stand-by 80 W Stand-by 70 W Idle 150 W Idle 130 W Idle 110 W Max. 1600 W Max. 1400 W Max. 1200 W INPUTS 7 single-ended 6 single-ended 5 single-ended via RCA connectors via RCA connectors via RCA connectors 7 balanced 6 balanced 5 balanced via XLR connectors via XLR connectors via XLR connectors OUTPUTS 7 channels via 5-way 6 channels via 5-way 5 channels via 5-way binding posts binding posts binding posts REMOTE CONNECTORS 12 VDC Out 12 VDC Out 12 VDC Out (12 V trigger) (12 V trigger) (12 V trigger) via a 3.5 mm connector via a 3.5 mm connector via a 3.5 mm connector DIMENSIONS INCHES 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d CENTIMETERS 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d WEIGHT SHIPPING 68 lb., 30.8 kg 66 lb., 29.9 kg 64 lb., 29.0 k Learn More
    $2,100.00

  • Krell KAV250A/3  recapped

    Krell KAV250A/3 recapped

    Krell KAV250A/3, overhauled, new capacitors. 90 day warranty, KAV-250a Stereo Amplifier FREQUENCY RESPONSE SIGNAL TO NOISE RATIO "A" WEIGHTED TOTAL HARMONIC DISTORTION (THD) GAIN INPUT IMPEDANCE INPUT SENSITIVITY OUTPUT VOLTAGE OUTPUT POWER, EACH CHANNEL DRIVEN BRIDGED POWER CONSUMPTION INPUTS OUTPUTS DIMENSIONS WEIGHT 20 Hz to 20 kHz +0 dB, -0.1 dB 0.4 Hz to 170 kHz +0 dB, -3 dB 118dB 1 kHz < 0.06% 20 kHz < 0.25% 26.4 dB 100 kOhms 2.15 Vrms Peak to Peak RMS 8 Ohms 4 Ohms 8 Ohms Idle Max. 138 V 49 V 250 W 500 W 1,000 W 210W 1,850 W 1 pair single-ended via RCA connectors 1 pair balanced via XLR connectors 1 pair amplifier channels via five-way speaker binding posts 19w x 6.3h x 15.3d in. 48.3w x 16h x 38.9d cm Shipping 50 lb., 22.7 kg Unit only 43 lb., 19.5 kg Learn More
    $2,100.00

  • Red Rose M1  220-240 volt only

    Red Rose M1 220-240 volt only

    Hook up with your favorite surround processor or used to biamp. The transformer on this is originally set for international voltage and will not work at 100-120hz. Low shipping rates to the world. Learn More
    $2,000.00

  • Classe DR25

    Classe DR25

    Classe DR25 available to ship 6/2017 250 Watt/Channel Power output: 250 watts per channel into 8Ω (stereo), 1000W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: 1.6V Signal to noise ratio: 100dB Speaker load impedance: 4Ω (minimum) Dimensions: 19 x 20.75 x 8 inches Weight: 70lbs Learn More
    $2,000.00

  • Krell Showcase 5  upgraded in black

    Krell Showcase 5 upgraded in black

    In black, capacitors have been upgraded and Krell modification performed to eliminate high standby idle (allowing for longer lifespan) performed. Will ship in your desired voltage. Krell box/packing. Excellent condition We are authorized Krell dealers Showcase 7 Showcase 6 Showcase 5 FREQUENCY RESPONSE 20 Hz to 20 kHz 20 Hz to 20 kHz 20 Hz to 20 kHz +0 dB, -0.15 dB +0 dB, -0.15 dB +0 dB, -0.15 dB .2 Hz to 95 kHz .2 Hz to 95 kHz .2 Hz to 95 kHz +0 dB, -3 dB +0 dB, -3 dB +0 dB, -3 dB SIGNAL TO NOISE RATIO >110 dB >110 dB >110 dB “A” WEIGHTED GAIN 26.2 dB 26.2 dB 26.2 dB TOTAL HARMONIC 1 kHz < 0.03% 1 kHz< 0.03% 1 kHz < 0.03% DISTORTION (THD) 20 kHz < 0.20% 20 kHz< 0.20% 20 kHz < 0.20% INPUT IMPEDANCE 45 kOhms 45 kOhms 45 kOhms INPUT SENSITIVITY 1.55 Vrms 1.55 Vrms 1.55 Vrms OUTPUT POWER 8 Ohms 125 W 8 Ohms 125 W 8 Ohms 125 W EACH CHANNEL DRIVEN 4 Ohms 250 W 4 Ohms 250 W 4 Ohms 250 W OUTPUT VOLTAGE Peak to Peak 90 V Peak to Peak 90 V Peak to Peak 90 V RMS 32 V RMS 32 V RMS 32 V POWER CONSUMPTION Stand-by 90 W Stand-by 80 W Stand-by 70 W Idle 150 W Idle 130 W Idle 110 W Max. 1600 W Max. 1400 W Max. 1200 W INPUTS 7 single-ended 6 single-ended 5 single-ended via RCA connectors via RCA connectors via RCA connectors 7 balanced 6 balanced 5 balanced via XLR connectors via XLR connectors via XLR connectors OUTPUTS 7 channels via 5-way 6 channels via 5-way 5 channels via 5-way binding posts binding posts binding posts REMOTE CONNECTORS 12 VDC Out 12 VDC Out 12 VDC Out (12 V trigger) (12 V trigger) (12 V trigger) via a 3.5 mm connector via a 3.5 mm connector via a 3.5 mm connector DIMENSIONS INCHES 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d CENTIMETERS 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d WEIGHT SHIPPING 68 lb., 30.8 kg 66 lb., 29.9 kg 64 lb., 29.0 k Learn More
    $1,999.00

  • Proceed by Madrigal Mark Levinson Amp 5 5 channel 100lb amplfier $5000 retail GORGEOUS CONDITION, ORIGINAL DOUBLE BOX

    Proceed by Madrigal Mark Levinson Amp 5 5 channel 100lb amplfier $5000 retail GORGEOUS CONDITION, ORIGINAL DOUBLE BOX

    Proceed Amp 5 five channel amplifier, $5000 retail, Madrigal manufactured, two available. The one listed here is gorgeous. I can sell you one with some scratches for two hundred less. Very reliable and of high quality, do not confuse with the much inferior amp 2 and am 3. Proceed Amp 5 Multi-channel Power Amplifier Home Theater Power Amplifiers Multi-Channel Amplifiers Written by Jerry Del Colliano Monday, 01 November 1999 Introduction Home theater is clearly the driving force behind the high end audio video market. However, very few music and film enthusiasts are willing to sacrifice pure music playback in order to enjoy the addictive sizzle of home theater. We want the best of both worlds. Enter the Proceed AMP 5. With Proceed being the little brother to the two-channel giant Mark Levinson, the AMP 5 shares many of the advantages and design cues found on the more pricey Levinson gear, while being nicely packaged for multi-channel use. The Proceed AMP 5 is a five-channel, single chassis THX-certified, power amplifier rated at 125 watts x 5 into 8 ohms and 250 watts x 5 into 4 ohms. Priced at $4995, the AMP 5 is the perfect partner for Proceed's AV preamp, the AVP, also priced at $4995. The Proceed AMP 5 accepts both balanced and unbalanced signals, changeable by the flip of a switch. This feature is of special importance for those planning to use a Proceed AVP, as the AVP outputs a combination of balanced and unbalanced outputs, not just one or the other. Other cool features equipped on an AMP 5 include five separate power supplies as opposed to sharing one or two power supplies across all five channels. This makes for a much more stable high end amplifier. The AMP 5 regulates its power using the same technology that is found in the nearly $20,000 Mark Levinson No. 33H power amplifiers. The Proceed AMP 5 has six stages of amp protection to keep you from ever experiencing the utter depression of smoking your amp and or toasting any of your loudspeakers. The AMP 5 also allows communication between itself and any number of devices so that you can switch it to standby. This is a quite nice when running a touch screen control system like a Crestron or PHAST. Music and Movies My reference theater system includes a Proceed AVP, AMP 5, M&K THX loudspeakers and subwoofer, a Sony DVD and Pioneer Elite Laserdisc player with Transparent audio and video cables. Considering Proceed's audio lineage, I gave the AMP 5 a thorough workout with both two and 5.1 channel sources starting with "It Had To Be You (big band and vocals)" by Harry Connick, Jr. from the When Harry Met Sally soundtrack (Columbia). The soundstage was wide, well exceeding the physical placements of the left and right loudspeakers. The vocals were rich (not quite Sinatra rich but . . .) and the piano sound was well placed, detailed and delicate. The piano was not veiled or fogged as I have heard on other theater systems that were not specifically outfitted for music playback. I am a huge fan of music mastered in 5.1 surround and I feel this will be the single most important element that inspires the next generation of music lovers to invest in high performance audio equipment. I was kindly invited by DTS and producer Bob Margouleff (Stevie Wonder, Devo, Oingo Boingo) to drop by the mastering sessions for Boyz II Men's II album into a 20-bit DTS CD. What a treat. The 5.1 channels of audio were still running from DA88 digital tape through a Sonic Solutions editing computer and a $1,000,000 Neve Capricorn mixing console. At 24-bit resolution, you can imagine how amazing the sound was. It made a lasting impression on me and set the mark for what the engineer-producer actually intended when playing the CD back on my system. Months later, I was able to test the Proceed AMP 5 with the Boyz II Men 20-bit CD (DTS Entertainment) and what a treat it was all over again. On their a cappella Beatles cover of "Yesterday," rich low frequencies resonate while the other harmonies float in a truly 360-degree soundstage. The sound was present, dynamic and detailed. I just loved it. For film soundtracks, I looked to Chapter Four of Austin Powers: Man of Mystery (DTS Laserdisc) and the Electric Psychedelic Pussycat Swingers Club scene to give the AMP 5 a rapid-fire test of 5.1 music, back to front surround and panning effects, as well as the explosive blast-off of a giant Bob's Big Boy statue. The mod music, including the 1960s anthem Incense and Peppermints, didn't have the same pop that Boyz II Men did. However, the harpoon shot from Dr. Evil sonically challenges many of the more famous fighter jet fly-bys in Top Gun. When Dr. Evil enters into his cryogenic freezing Bob's Big Boy Statue to launch himself into space for 30 years (complete with Mr. Bigglesworth in tow), you get a chance to hear roaring rocket blasts as well as roaring laughter as this silly scene concludes. The true goal of filmmaking and home theater is to stimulate the audience's emotions. Scene 22 on Super Speedway (Image DVD) instills fear in each viewer with a dogfight between Michael Andretti and Alex Zanardi during an Indy car race in the pouring rain. The scene is shot from an on-board camera just above the head of Andretti. At 180 to 205 mph, you marvel at how these two hotshot drivers could even keep their cars on the track, while you are rigidly hanging on to the edge of your own seat. The AMP 5 shows its brawn again when, in a later pit scene, Andretti wound the Ford Cosworth engine of his son's race car to 12,000 RPMs. My theater lit up with the high strung intensity of a real Indy car. The Downside Technically, the Proceed AMP 5 works perfectly with the Proceed AVP AV preamp, but as far as looks, the AMP 5 won't win many design awards. The AVP's appearance is cool and very modern, employing an off-white tone with gray accents. The AMP 5 uses much more gray and is a bit utilitarian for my tastes. I know looks don't affect the sound, but they do affect your lust factor and pride of ownership. The speaker connectors on my Mark Levinson No. 333 are the coolest I have encountered in a high-end power amp. They avoid using nuts that require you to over-tighten your spade lugs. Instead, the No. 333 has a design more like a butterfly nut that guarantees that you can get the perfect connection without a wrench. It's too bad those connectors aren't on the AMP 5. I guess I'll have to wait for a future Mark Levinson 5 channel amp for that feature. Conclusion I will pay the Proceed AMP 5 a very special compliment. I have opened up my checkbook to buy it. The amp, while not overrated for power, kicks serious butt. The 125 watts x 5 channels makes it practically rain sound in my modestly-sized theater. More importantly, the tonality of the amp is so much like a Mark Levinson amp that at $5000, a home theater enthusiast must consider this a high-end bargain. Learn More
    $1,880.00

  • Krell KAV-500/5

    Krell KAV-500/5

    Krell KAV-500/5 rell KAV-500 Multichannel Amplifier 100 Watts/Channel into 8 Ohms, 200 Watts into 4 Ohms 400 Watts/Channel bridged (2 channels) Mfr FR 20 Hz - 20 kHz ± 0.5 dB THD < 0.03% Input Impedance 100 kOhms Size: 6.25" H x 19" W x 17" D Weight: 47 pounds Price: $4,500 5 Channels ($3,000 2 Channel, $500 Per additional channel) Learn More
    $1,700.00

  • Krell KAV-500/4

    Krell KAV-500/4

    Krell KAV-500/4 Krell KAV-500 Multichannel Amplifier 100 Watts/Channel into 8 Ohms, 200 Watts into 4 Ohms 400 Watts/Channel bridged (2 channels) Mfr FR 20 Hz - 20 kHz ± 0.5 dB THD < 0.03% Input Impedance 100 kOhms Size: 6.25" H x 19" W x 17" D Weight: 47 pounds Price: $4,500 5 Channels ($3,000 2 Channel, $500 Per additional channel) Learn More
    $1,400.00

  • Lexicon NT512 five channel, same as Bryston 9Bst

    Lexicon NT512 five channel, same as Bryston 9Bst

    Lexicon NT512 Bench tested, works great, two available, one black, one silver 120 watts per channel RMS into 8 Ohms, 200 into 4. THX certified Balanced and RCA Learn More
    $1,350.00

  • Bryston 9B ST

    Bryston 9B ST

    Bryston 9bst 3 channel version. If you find two cards you can upgrade to a five channel. (I can give you two lexicon channels which are identical for an extra $500 Learn More
    $1,250.00

  • Bryston 5BST 3 channel amplifier

    Bryston 5BST 3 channel amplifier

    Bryston 5Bst under warranty until 2015 Learn More
    $1,250.00

  • Bryston 6b

    Bryston 6b

    Bryston 6b just in, good condition. three available price is for each a three-channel powerhouse capable of 250 watts/channel into an 8-ohm load or a whopping 400 watts into 4. The 6B-ST is actually a rack-mountable chassis housing three fully modular mono power amps, each with its own independent power supply with over 40,000 MFD of filter capacitance. This design not only improves the 6B's reliability, but also reduces interchannel crosstalk to vanishingly low levels. Only a soft-start AC circuit is shared by the three channels, each of which has its own indicator LED. Two 6B-STs will provide all the power needed for a full-range surround system. A pair can also be used to bi-amp or tri-amp high-performance stereo loudspeakers. Each amplifier module features a three-position gain switch for balanced or unbalanced inputs, and a polarity switch to make speaker-to-speaker phase alignment easy. A remote 12-volt trigger allows the amp to be switched on or off by a similarly equipped preamp. The Bryston 6B-measures 19" W (standard rack mount black faceplate) x 19" D x 7" H and weighs 85lbs. A silver faceplate is available as an option, as is a 17" version without handles. Like all Bryston products, the 6B-ST carries a 20-year warranty. Learn More
    $1,000.00

  • Crestron CNAMPX 7X200 built by ATI  $5000 new

    Crestron CNAMPX 7X200 built by ATI $5000 new

    No fan, unlike with some amps for HT installs, this is passively cooled. Also come with removable rack ears for rack mounting. Same amp as ATI AT2007 These amps (at $5000US retail) From Crestron: •Audiophile-grade surround sound amplifier •High-performance Class AB design •Discrete high-current, bipolar output transistors •200 Watts per channel @ 8 ohms (full bandwidth) •Twin MOH-core toroidal transformers with bifilar windings •Separate power supply for every channel •Convection-cooled modular component design •Opto-coupled output protection | Inrush current limiting •Remote power control and temperature monitoring via Cresnet Output Power 20Hz to 20kHz, all outputs driven at rated THD: •200 watts per channel at 8 ohms •300 watts per channel at 4 ohms Power Bandwidth 3Hz to 150kHz, +0/-3dB Frequency Response 20Hz to 20kHz, +0/-0.1dB at 1 watt, 8 ohms Total Harmonic Distortion (THD) ≤0.03% at full power SMPTE I.M. Distortion ≤0.05% S/N Ratio >110dB A-weighted Gain 28dB Damping Factor >400 Channel Separation >100dB, 20Hz to 20kHz Learn More
    $1,000.00

  • Perreaux 6100 6 channel amplifier

    Perreaux 6100 6 channel amplifier

    Specifications: Power Output Unbridged 6 x 120Wrms continuous, driven into 8Ω from 20Hz to 20kHz at no more than 0.015% Total Harmonic Distortion 160Wrms per channel into 4Ω Bridged 3 x 275Wrms continuous, driven into 8Ω from 20Hz to 20kHz at no more than 0.04% Total Harmonic Distortion Frequency Response ........................................................................................20Hz-20kHz ±0.75dB .....................................................................................................................-3dB @ 6Hz and 120kHz Total Harmonic Distortion (unbridged) Rated power ..............................................................................................................0.005% @ 1kHz Worst case prior to clipping...................................................................................................... 0.04% Dynamic Headroom...................................................................................................................2.5dB Damping Factor............................................................................................................. 600 @ 100Hz ......................................................................................................................................... 400 @ 1kHz Noise (inputs shorted, A weighted)............................................................................................. -97dB Input Sensitivity .......................................................................................................................1.0Vrms Input Impedance ........................................................................................................................ 47kΩ Dimensions Width...........................................................................................................................440mm (17.5”) Height............................................................................................................................177mm (7.0”) Depth...........................................................................................................................430mm (17.0”) Weight..........................................................................................................................20.0kg (44.0lb) Learn More
    $995.00

  • Emotiva XPA-5

    Emotiva XPA-5

    Emotiva XPA-5 5 – independent mono blocks @ 200 wpc into 8 ohms; 350 wpc into 4 ohms Class A/B design with short signal path Triple Darlington with Toshiba output stages Dual Differential input Balanced (XLR) and Un-balanced (RCA) Audiophile quality 5 way binding post THD+N at rated power output: 0.007% S/N ratio: >100db 10 to 120Khz (-3db) and 20 to 20 (with less than .15db deviation) 32db gain structure 1600VA toroidal transformer 60,000uF secondary capacitance 70 pounds 17” W x 7.75” H x 19” D Learn More
    $790.00

  • Sony TAN9000ES

    Sony TAN9000ES

    Sony TAN9000ES Two available...., Price is for each. Tested, no DC offset, works well Product Information The Sony TA-N9000ES amplifier provides over 115 watts RMS per channel for powerful and efficient audio quality. With a copper-plated chasis, this Sony amplifier is very durable and rugged. Although being rugged, this Sony 5 channel amplifier has a smooth faceplate with great controls. While providing so much power, the Sony TA-N9000ES has ample heatsinking capability that keeps it cool throughout its operation. To protect the power supply, this Sony 5 channel amplifier has a copper shield. The five amplifiers come with special output transistors that decrease the resonance of the unit. Moreover, this Sony amplifier has a short-signal, single-point earthing system that reduces distortion and simplifies the PWB design. Product Identifiers Brand Sony Model TA-N9000ES MPN TA-N9000ES Key Features Frequency Response 20 Hz - 20 kHz Number Of Channels 5 Tech Details RMS Power per channel at 4 ohms 115 Watt RMS Power per channel at 8 ohms 115 Watt THD (Total Harmonic Distortion) 0.01 % Remote Control Without Remote Control Bridgeable Bridgeable Learn More
    $650.00

  • Rotel RB-985
    $480.00

  • Carver AV-405

    Carver AV-405

    Carver AV-405 REBUILT, all new capacitors for long life and brand new sound quality, six month parts and labor warranty 8-ohm FTC rated power/ch 100W 4-ohm FTC rated power/ch 150W 2-ohm dynamic power/ch 200W Center Channel Power 110W Rear Channel Power 50W 4/8-ohm FTC rated THD 0.1% Input Impedance (Line) 47 kohms Rated full power bandwidth 20-22kHz S/N-IHF A-Weighted,dB >95dB Dimensions (HxWxD inches) 4.4x19x15 Removable rack handles for 17" width. 5 channel amplifier for Dolby Pro Logic systems. Exclusive Power Enhancement CircuitTM for surround channels. Includes special protection circuits. The AV-405 five channel power amplifier was designed specifically for use in home theater surround sound systems. When teamed with one of Carver's superb Dolby Pro Logic components (preamplifier, preamp/tuner, or outboard processor), the AV-405 provides power, flexibility far surpassing any single-unit receiver, yet does so at a comparable cost. With 410 watts of total output (8Ω loads), the AV-405 has ample power reserves for accurately reproducing peaks on digital soundtracks, even when driving low impedance loads. Elevated power output for the center channel, an exclusive Carver feature, provides better handling of dynamic peaks on the dialog tracks as well as more balanced, realistic soundtrack reproduction. The AV-405 shuns production shortcuts common in low-cost surround sound receivers. It employs all discrete circuitry in the output stage for greater long-term reliability and superior response to peak demands for simultaneous high current and high voltage. Robust power supplies ensure that all five channels can be driven to full power simultaneously – not always the case with receivers! In addition, the AV-405 incorporates Power Enhancement CircuitryTM, an exclusive Carver feature which allows higher undistorted volume levels on the rear surround channels. Learn More
    $350.00

  • Marantz MA500

    Marantz MA500

    Marantz MA500 Treat your family and guests to quality entertainment by using the Marantz MA-500 1 Channel Power Mono Amplifier. This unit is compact enough to be functional and stylish in practically any spot in a room. Able to deliver 125 watts into 8 ohms, this product is ideal for powering just about any speaker. In fact, it can create a new multi-channel home theater or provide an additional channel for amplifiers to an existing system. An RC-5 remote control also makes it possible for users to change settings without getting up from the comfort of their seats. This black amp weighs a mere 13.2 pounds, which makes it possible for users to move it easily from one spot to another. They measure 19 inches in depth by 3.5 inches in width by 6 inches in height.This Monoblock equipment is specifically designed for use in home theaters and surround-sound system setups. The 125-watt and 180-watt performance delivers high power into 8-ohm loads, ensuring that users don't lose signals even in challenging audio environments. A frequency response between 10 and 100K combines with a signal-to-noise ratio of less than 116 decibels, making it a practical choice for beginners who want a high-tech music solution that can easily synchronize with a variety of music systems and accessories. The product can be bridged at 8 ohms for a total of 360 watts.This isn’t just a reliable product for home theater and small professional setups. The amp also boasts an excellent reputation for its support for home computers, car subwoofers, speakers, and other accessories. In fact, these amps will never run out of breath. Marantz MA-500 1 Channel Power Amplifier can really provide a lot of RMS power. Buyers should not rule out flexible integration of these capable products because they can offer a pleasing experience when properly paired and tuned.This product delivers the kind of performance enthusiasts expect from the highest-end amp. It has plenty of reserve energy even when hooked up with some of the most modern speakers and receivers. As for performance, the sound quality will endure even at lows as low as 20 hertz. In addition, it will continue to show clear and precise mids and highs almost every time. Even non-audiophiles are likely to be impressed by the clear sound and amazing bass response. This is the kind of performance that’s sure to keep you on your toes. That’s particularly true when hooked up to phono preamplifier or even ma-9s2 block amps, receivers, advance stereo headphones, and other monoblock gear.Overall, the durability and audio quality of MA500 is sure to serve you well now, and even as audio technology advances. This is a great choice for casual listeners, audiophiles, and even professionals who want reliable equipment, small size, and high output. This is a sublime amplifier design that should satisfy even the most demanding listener. Product Identifiers Brand Marantz Learn More
    $188.00

Grid  List 

34 Item(s)

per page