High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

Power Amplifiers

Grid  List 

Items 1 to 50 of 209 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page
  • Parasound HCA-500 High Current Power Amplifier

    Parasound HCA-500 High Current Power Amplifier

    Parasound HCA-500 High Current Power Amplifier Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 60kHz Total harmonic distortion: 0.25% Damping factor: 100 Signal to noise ratio: 100dB Dimensions: 17-1/4 x 3-3/4 x 11-3/4 inches Weight: 16lbs Learn More
    $199.95

  • Adcom GFA-535ii

    Adcom GFA-535ii

    Adcom GFA-535ii bench tested 5/18 Learn More
    $200.00

  • Triad Powersub Ampliflier

    Triad Powersub Ampliflier

    Triad Powersub AmpliflierTriad benchtested 5/18 good Learn More
    $200.00

  • Linn Knekt-A Room Amp

    Linn Knekt-A Room Amp

    Linn Knekt-A 3 available price is for each Learn More
    $200.00

  • Rotel RB-970BX Stereo/Mono Power Amplifier

    Rotel RB-970BX Stereo/Mono Power Amplifier

    Rotel RB-970BX Power Amplifier Black Power output: 60 watts per channel into 8Ω (stereo), 180 watts into 8Ω (mono) Frequency response: 15Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 280 Input sensitivity: 1V Signal to noise ratio: 116dB Speaker load impedance: 4Ω to 16Ω Dimensions: 440 x 92 x 334mm Weight: 6.8kg Learn More
    $225.00

  • Rotel RB-951 Stereo Power Amplifier

    Rotel RB-951 Stereo Power Amplifier

    Rotel RB-951 Power Amplifier Power output: 50 watts per channel into 8Ω (stereo), 150 watts into 8Ω (mono) Frequency response: 15Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 280 Input sensitivity: 0.775V Signal to noise ratio: 116dB Speaker load impedance: 4Ω (minimum) Dimensions: 440 x 92 x 334mm Weight: 6.8kg Learn More
    $225.00

  • Crestron CNAMPX-2X60

    Crestron CNAMPX-2X60

    Audiophile-grade 2 channel amplifier High-performance Class AB design Discrete high-current, bipolar output transistors Learn More
    $250.00

  • NHT SA-1 Subwoofer Power Amplifier

    NHT SA-1 Subwoofer Power Amplifier

    NHT SA-1 Subwoofer Power Amplifier Audio Inputs: Stereo L/R RCA Number of Channels: 1 Number of Inputs: 2 Color: Black Model: SA-1 MPN: SA-1 Power: 90 W Learn More
    $250.00

  • Adcom GFA-545

    Adcom GFA-545

    Adcom GFA-545 bench tested 5/18 Learn More
    $250.00

  • NAD 916 Amplifier

    NAD 916 Amplifier

    NAD 916 Amplifier missing power button, works fine Learn More
    $299.00

  • Niles SI-1230 Multi Channel Power Amplifier

    Niles SI-1230 Multi Channel Power Amplifier

    Niles SI-1230 Multi Channel Power Amplifier- 12 Channels bench tested 5/18 30 watts RMS per channel into 8 Ohms, all channels driven 42 watts RMS per channel into 4 Ohms, all channels driven Adjacent channels are bridgeable to 80 watts RMS into 8 Ohms, all channels driven Three turn-on modes: music sense, voltage trigger and manual Binding posts spaced to accommodate dual banana plugs Item Weight 34.8 pounds Learn More
    $299.00

  • AMC 2445 - 2/4 Channel Power Amplifier

    AMC 2445 - 2/4 Channel Power Amplifier

    AMC 2445 - 2/4 Channel Power Amplifier Power output: 90 watts per channel into 8Ω (stereo), 45 watts per channel into 8Ω (4 channels) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Damping factor: 100 Input sensitivity: 0.866V Speaker load impedance: 4Ω (minimum) Dimensions: 430 x 112 x 288mm Weight: 9.5kg Year: 2001 Learn More
    $300.00

  • Mitsubishi DA-A7DC Power Amplifier

    Mitsubishi DA-A7DC Power Amplifier

    Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 107dB Dimensions: 425 x 170 x 285mm Weight: 16kg Learn More
    $325.00

  • Krell Trigger Converter 12pin in to 5 pin out

    Krell Trigger Converter 12pin in to 5 pin out

    Krell Trigger Converter 12pin in to 5 pin out Learn More
    $399.00

  • B&K ST1400 MK II

    B&K ST1400 MK II

    B&K ST1400 MK II good cosmetics Learn More
    $400.00

  • ADS A2

    ADS A2

    ADS A2 bench tested 5/18 good Learn More
    $400.00

  • Rotel RMB-1066   6 channel amplifier
    $425.00

  • Crown K1 Balanced Current Amplifier (4 available) 350 watts/channel

    Crown K1 Balanced Current Amplifier (4 available) 350 watts/channel

    Crown K1 Balanced Current Amplifier (4 available) in 3/23 consumer used only Crown K1 Amplifier at a Glance: Balanced Current Amplifier technology ensures thermal stability without a fan! Delivers 350 watts at 8 Ohms, up to 1500 watts (bridged) at 4 Ohms Incredibly flat frequency response for compromise-free audio Massive power with one tenth the heat! The K1 amp from Crown is the first amplifier to take advantage of Crown's new Balanced Current Amplifier technology. This technology yields extremely efficient power amplification while generating just one-tenth the heat of conventional amplifiers. In fact, the powerful K1 Amplifier can deliver an amazing 750 watts per channel into 2 Ohms (and that's a very solid 2 Ohms)! As a result the amp can put out clean, uncolored power without the use of a fan. No fan means the K1 runs quietly and cleanly, takes up less space in a rack and requires less maintenance. The K1 also boasts advanced circuitry protection that guards against DC, mismatched loads, internal faults and high frequency overloads. Crown is so confident of the K1's stability that it's backed by a three-year no fault warranty! Power to spare, no matter what your configuration The Crown K1 Amplifier is rated to deliver 350 watts per channel at 8 Ohms, 550 watts into 4 Ohms or 750 watts per channel into 2 Ohms. In addition, in bridged mode the K1 has a capability of 1100 watts at 8 Ohms or 1500 watts at 4 Ohms - all while running without a fan! The K1 is cool, clean and quiet. Legendary Crown frequency response Crown amps have a long history of providing crystal-clear audio response in critical listening situations, and the K1 Amplifier is no exception. Flat frequency response: (+/- .25 dB) from 20Hz to 20kHz ensure you get out of the K1 exactly what you put into it! Crown K1 Amplifier Features: Soft Start (Keeps amp from drawing large currents when first turned on) Switchable Input Sensitivity (1.4V or 26dB) Mono mode switches: Bridged, Y (parallel) or both (for daisy chaining) Balanced XLR and 1/4" inputs 5-way binding posts Channel 1 and Channel 2 gain controls with notched settings LEDS: Thermal (Warns of need to dissipate heat), Clip (Warns of distortion in the amp), IOC (Input / Output Comparator: Warns of distortion at 1/30th the level of clipping by comparing the actual waveforms of the input to the output), Signal (glows when output signal is present), Enable (Indicates Power status) Frequency Response: +/- .25 dB for 20Hz - 20kHz Power Output (per Channel): 750 watts into 2 Ohms, 550 watts into 4 Ohms, 350 watts into 8 Ohms Bridged (mono) power: 1500 watts at 4 Ohms, 1100 watts at 8 Ohms Signal-to Noise (A Weighted): >100dB below rated power Damping Factor: >3000 from 10 to 400Hz Input Impedance: Nominally 20KOhms balanced, 10KOhms unbalanced Passive convection cooling allows amplifier to drive 2 Ohm load at 8db into clip in 104 degree environment! Power Supply can configure to 100, 120, 200, 220, 230, 240, 250 VAC at 50 or 60 Hz Learn More
    $450.00

  • Rotel RB-985

    Rotel RB-985

    Rotel RB-985 Five channels of amplification, THX certified, 100 watts rms output per channel at 8 Ohms, Frequency response 10 Hz - 80 kHz plus or minus 0.5 dB, harmonic distortion less than 0.03%, input impedance 27 kOhm, damping factor 180, size 5 1/2"H x 17 3/8"W x 15 5/8"D, weight 34 pounds Each of the five amplifier channel boards has had their capacitors changed for as new sound quality and reliability. Learn More
    $450.00

  • B&K AV2500 series II 5 channel

    B&K AV2500 series II 5 channel

    B&K AV2500 series II, one owner since new, individual level controls for each channel, very nice condition Learn More
    $450.00

  • Dynaco ST 150 power amplifier

    Dynaco ST 150 power amplifier

    Dynaco ST 150 power amplifier The Dynaco Stereo 150 is a basic two channel power amplifier employing all silicon semiconductors. They include 24 transistors, 2 zener diodes, 16 diodes, and 2 thermal sensors. The output circuitry is of the full complementary symmetry design. The entire amplifier, except for an input network, is direct coupled. It's measured distortion levels approach the threshold of much laboratory test equipment, not only at the commonly specified full power ratings, but more importantly at very low power outputs as well. This is the result of circuit techniques which eliminate any discernible crossover notch at low levels, and contributes to the Stereo 150's freedom from listening fatigue. It's accurate, uncoloured sonics have been achieved on a wide variety of loudspeaker loads, including electrostatics and multiple drivers with complex crossovers. The design of a very fine power amplifier implies the necessity of several protection techniques for the amplifier, and for the speaker load. In addition to the AC line fuse, four separate B+ fuses are supplied. Electronic volt-amp limiting ensures safe operation of the output transistors, and a thermal sensor mounted directly on each output stage reduces the input if high temperature occurs. An unusually large radiating area for the heat fins, which are coupled to an aluminium back panel, form a highly efficient heat sink. Speaker fuses protect the load. The Stereo 150 has been designed as two independent 75 watts (at 8 ohms) amplifying channels with a common power supply having a high degree of inherent regulation. In addition, where higher powers or higher volt-amp capabilities are required for lower load impedances, easy internal restrapping permits monophonic operation for 150 watts output (at 8 ohms). An accessory kit is planned at additional cost for two output meters and meter switching, which includes alternative inserts for the front panel. Specifications Power output: 75 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.25% Damping factor: 50 Input sensitivity: 1V Signal to noise ratio: 95dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 24 x transistors, 2 x zener diodes, 16 x diodes, 2 x thermal sensors Dimensions: 14.5 x 13.75 x 7 inches Weight: 29lbs Learn More
    $450.00

  • Rotel RMB-1506 6 Channel Amplifier

    Rotel RMB-1506 6 Channel Amplifier

    Rotel RMB-1506 6 Channel Amplifier Black 2 Available Power output: 50 watts per channel into 8Ω (6 channels) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 200 Gain: 26 dB Input sensitivity: 1V Signal to noise ratio: 115dB Speaker load impedance: 4Ω (minimum) Dimensions: 431 x 144 x 424mm Weight: 15.3kg Learn More
    $450.00

  • B&K AV6000

    B&K AV6000

    B&K AV6000 bench tested 5/18 Learn More
    $499.00

  • Speakercraft BB865 multi channel power amplifier

    Speakercraft BB865 multi channel power amplifier

    Speakercraft BB865 multi channel power amplifier features: - 65 Watts per Channel RMS @ .05% THD ±3dB - 4U High - Independent level controls for each channel - Each channel can be assigned to a common left, common right, mono, or a dedicated input - Adjoining channels are bridgeable - Remote power-on switching via Signal Sensing or 3-30V Trigger - Separate protection circuitry for each channel - 12V control output for switching auxiliary devices on and off - Pass through output allows daisy-chaining of multiple amplifiers - 5-way Binding Posts Specifications: Weight: 60 lbs. Standard Model Dimensions (H x W x D): 6 15/16"(+½" for feet) x 17" x 17 7/16"** (176.225mm x 431.8mm x 442.925mm) Learn More
    $500.00

  • Thule Audio SPIRIT PA100 power amplifier

    Thule Audio SPIRIT PA100 power amplifier

    Thule Audio Spirit PA100 power amplifier Thule Audio is a Danish company, specializing in audio equipment, ranging from basic entry level models, to models which are High End stuff. The product line is well thought out, and as we shall see, very rationally conceived and executed. For other reviews of Thule Audio products, look over the site. Both cases are virtually identical, and share the overall look of the entire Thule Spirit range. They are made of uncommonly thick, heavy and well finished cases, while front panels are made from 8mm thick aluminium, machined so that they have a gentle slope. In the center, one will find a "gold" knob in case of the preamp, and a decoration in case of the amp. The preamp has an alphanumeric display above the knob, which provides the user with all relevant information on power on, volume and input status in red LEDs. All this is fully remote controllable, and a remote control unit is supplied. The power amp is a very simple affair, with only a red LED power on indicator on its front side. Both units have rocker power on/off switches at the back, as they're intended to be left in standby mode all the time. [Thule PR 100 inside view] Both units share much more common componentry that I would have imagined. Both use toroidal power supplies, where the amp's toroid is rated at 500VA, while the preamp's toroid is rated at 300VA. No, you're not seeing things, it's not a typo error, I did say 300VA. That's enough for a 2x75W/8 Ohm power amplifier, let alone a simple preamp. In fact, the preamp is EXACTLY the same as the IA60 integrated amplifier, minus the power amp circuitry and heat sinks. Put another way, the preamp consists of the preamp section of the IA60 integrated. Hence the 300VA toroidal transformer - that's what they use in IA60 (see review on this site). The power amp, on the other hand, is once more the same board, but minus the preamp circuitry and with heftier power supplies - bigger transformer, and 4x10.000uF capacitors, instead of just 2x10.000uF. This is no accident, this is rational thinking. Use the same board, use the same case, use the same power supplies and you increase the numbers of your serial production, thus pushing the cost per unit down. The only thing that spoils the show is the preamp's price - it's simpler than the integrated model, but it's not only not cheaper, it's actually somewhat more expensive. That is most odd, I must say - probably for "complex marketing reasons" (a phrase I first heard in the early seventies, and it's gotten worse since then). You still have 5 line level inputs, with no option for a phono RIAA board of any kind. You still don't have a headphone output - somebody should inform the Scandinavian audio industry that headphones have been invented some decades ago, they seem to have collectively overslept that event. As usual, all input and output sockets are gold plated. Like elsewhere in Thule's product portfolio, volume and balance are controlled by a ladder of laser trimmed resistors, contained within an LM1792 digital volume control, a good point - no mechanics, no wear and tear, no aging, unparalleled precision. The amp is rated at 2x100W/8 ohms and 170W/4 Ohms - that should be enough for most of us. It has an RCA Cinch and a balanced XLR input, just as the preamp has the same outputs. Acting on logic and Thule's recommendation, I used balanced lines to link the two, except when using other units. Learn More
    $599.00

  • JBL Synthesis S400 stereo power amplifier

    JBL Synthesis S400 stereo power amplifier

    JBL S400 stereo power amplifier Power output: 200 watts per channel into 8Ω (stereo), 400W into 8Ω (mono) Frequency response: 10Hz to 70kHz Total harmonic distortion: 0.02% Damping factor: 120 Input sensitivity: 1V Signal to noise ratio: 105dB Speaker load impedance: 4Ω (minimum) Dimensions: 5.5 x 19 x 16.5 inches Weight: 45lb Learn More
    $599.00

  • Audio Access MA362 12 channel Power amplifier

    Audio Access MA362 12 channel Power amplifier

    The Audioaccess MA-362 12-Channel Amplifier represents a high-value approach while providing 12 channels of clean amplifier power for multiroom system applications. Power to Spare: With a power rating of 50 watts per channel at 8 ohms from 20Hz to 20kHz with less than .05% THD, the MA-362 will drive virtually any loudspeaker to room-filling volume. Power into 4 ohms is even more impressive at 75 watts per channel. All channel pairs may be bridged if additional power is required. Cool operation is ensured with a design incorporating heatsinks, flow-through ventilation and low-noise fans. Learn More
    $600.00

  • PS Audio Delta 100
    $600.00

  • Crestron CNAMPX 12 X 60 multi channel power amplifier

    Crestron CNAMPX 12 X 60 multi channel power amplifier

    Crestron CNAMPX 12 X 60 multi channel power amplifier Learn More
    $600.00

  • Sony TAN9000ES

    Sony TAN9000ES

    Sony TAN9000ES Two available...., Price is for each. Tested, no DC offset, works well Product Information The Sony TA-N9000ES amplifier provides over 115 watts RMS per channel for powerful and efficient audio quality. With a copper-plated chasis, this Sony amplifier is very durable and rugged. Although being rugged, this Sony 5 channel amplifier has a smooth faceplate with great controls. While providing so much power, the Sony TA-N9000ES has ample heatsinking capability that keeps it cool throughout its operation. To protect the power supply, this Sony 5 channel amplifier has a copper shield. The five amplifiers come with special output transistors that decrease the resonance of the unit. Moreover, this Sony amplifier has a short-signal, single-point earthing system that reduces distortion and simplifies the PWB design. Product Identifiers Brand Sony Model TA-N9000ES MPN TA-N9000ES Key Features Frequency Response 20 Hz - 20 kHz Number Of Channels 5 Tech Details RMS Power per channel at 4 ohms 115 Watt RMS Power per channel at 8 ohms 115 Watt THD (Total Harmonic Distortion) 0.01 % Remote Control Without Remote Control Bridgeable Bridgeable Learn More
    $650.00

  • Rotel RB-1070 Stereo Amplifier

    Rotel RB-1070 Stereo Amplifier

    Rotel RB-1070 Power Amplifier Power output: 130 watts per channel into 8Ω (stereo), 330 watts into 4Ω (mono) Frequency response: 4Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 500 Input sensitivity: 1V Signal to noise ratio: 120dB Speaker load impedance: 4Ω (minimum) Dimensions: 430 x 121 x 350mm Weight: 11.9kg Learn More
    $695.00

  • Counterpoint SA12
    $700.00

  • Speakercraft BB1265 multi channel power amplifier

    Speakercraft BB1265 multi channel power amplifier

    Speakercraft BB1265 multi channel power amplifier 12 channel power amp weight 71 pounds Learn More
    $700.00

  • Linn AV5125

    Linn AV5125

    Linn AV5125 black 5 channel Learn More
    $719.00

  • Dynaco Stereo 120 (3) and PAT 4 preamp

    Dynaco Stereo 120 (3) and PAT 4 preamp

    You can purchase each item individually. We have one 120 that we just replaced the coupling caps and resoldered the board as needed. That's $250 Inquire The Dynaco Stereo 120 is an all silicon transistor basic power amplifier for use with separate preamplifiers such as the Dynaco PAT-4 or PAT-5, or for use with tape recorders or tuners such as the FM-5 or AF-6, which have their own volume controls. The unit contains two 60 watt amplifiers on one chassis with a common power supply. Although the Stereo 120 is a solid state device, containing transistors and similar semiconductors, it has been designed to be used under normal conditions without special safety precautions, just as if it were a high grade tube amplifier. Thus it can be connected to source and speaker components and used with confidence in all conventional arrangements. There are no circuit breakers, speaker fuses, or other resettable devices to impede the use of the Stereo 120 under any reasonable conditions of use or abuse. This is achieved by using novel circuits (on which patents are pending) which automatically and instantly protect the amplifier. Specifications Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.5% Damping factor: 40 Input sensitivity: 1.5V Signal to noise ratio: 95dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 15 x transistors, 15 x diodes Dimensions: 13 x 10.5 x 4 inches Weight: 20lbs Learn More
    $770.00

  • JBL Synthesis S820 Stereo Power Amplifier

    JBL Synthesis S820 Stereo Power Amplifier

    JBL Synthesis S820 Stereo Power Amplifier Power-200 Watts Per Channel Color-Black Learn More
    $795.00

  • Niles SI-1260 Multi Channel-12 Power amplifier

    Niles SI-1260 Multi Channel-12 Power amplifier

    Niles SI-1260 Multi Channel Power amplifier 12-channel amplifier power output (20-20,000 Hz at 0.06% THD, all channels driven): 60 watts RMS per channel at 8 ohms 80 watts RMS per channel at 4 ohms adjacent channels are bridgeable to 120 watts RMS into 8 ohms unique BusMatrix™ selector allows four configurable options for each channel: left bus, right bus, left plus right bus (mono), or the channel's dedicated input 6 independent turn-on circuits for multi-room audio applications 3 turn-on modes: automatic signal-sensing, voltage trigger, and manual voltage trigger input accepts 3-30V AC/DC binding posts spaced to accommodate dual banana plugs independent level controls for each channel cascade outputs for "daisy-chaining" additional amplifiers independent protection circuits for each channel removable AC power cord weight: 70 lbs. 17"W x 7-3/8"H x 18-1/2"D Learn More
    $795.00

  • Rotel RB-1091 Mono  Power Amplifier

    Rotel RB-1091 Mono Power Amplifier

    Rotel RB-1091 Mono Power Amplifier Black Power output: 500 watts into 8Ω (mono) Frequency response: 10Hz to 40kHz Total harmonic distortion: 0.03% Damping factor: 400 Gain: 27.2 dB Input sensitivity: 2.2V Signal to noise ratio: 118dB Dimensions: 432 x 92 x 407mm Weight: 7.8kg Learn More
    $795.00

  • PS Audio 200C (3 available)

    PS Audio 200C (3 available)

    PS Audio 200C (3 available) we need to service/upgrade these before shipping Learn More
    $800.00

  • Marantz MM7025

    Marantz MM7025

    Marantz MM7025 used excellent About this product Product Information The Marantz MM7025 is a 2-channel amplifier that is sure to boost the performance of your audio system. With a power output of 140 watts, this Marantz amplifier makes sure that you experience a power-packed performance. The 8 Hz - 100 kHz frequency response range of this 2-channel amplifier provides you with crisp highs and a tight bass response. With a signal-to-noise ratio of 105 dB, this Marantz amplifier reproduces even the minutest of musical detail with reduced background noise. The Marantz MM7025 features RCA and balanced XLR inputs to provide complete system compatibility, without the need of a preamplifier or a processor. Learn More
    $800.00

  • Marantz sixteen 16
    $850.00

  • Proceed Amp3
    $850.00

  • SUMO ANDROMEDA II POWER AMPLIFIER

    SUMO ANDROMEDA II POWER AMPLIFIER

    SUMO ANDROMEDA II POWER AMPLIFIER excellent cosmetics Our tech went through this and readjusted dc offset, bias Sumo Andromeda II: Solid-state stereo power amplifier. Rated power output: 240Wpc into 8 ohms (23.8dBW) with less than 0.05% THD, 400Wpc into 4 ohms (23dBW) with less than 0.1% THD, from 20Hz–20kHz. Intermodulation distortion (IMD): 0.05% from 0.25W to full power. Frequency response: ±0.1dB 20Hz–20kHz, –3dB from 0.1Hz–170kHz. Input impedance: 47k ohms. Input sensitivity: 1.8V RMS for rated output. Hum and noise: 110dB below rated power. Rise time: less than 2µs. Slew rate: 115V/µs. Damping factor: greater than 500. Dimensions: 19" W by 7" H by 16.75" D Weight (shipping): 55 lbs. Learn More
    $850.00

  • Bryston 6b  Stereo Amplifier
    $860.00

  • Rotel RB-1582 Stereo Power Amplifier
    $899.00

  • Nakamichi Stasis PA5 Amplifier

    Nakamichi Stasis PA5 Amplifier

    Nakamichi Stasis PA5 Amplifier Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 7Hz to 150kHz Total harmonic distortion: 0.1% Damping factor: 60 Input sensitivity: 1.4V Signal to noise ratio: 120dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 20 x transistors Dimensions: 435 x 135 x 368mm Weight: 16kg Learn More
    $899.95

  • PS Audio GCC-100

    PS Audio GCC-100

    one owner, with remote The GCC-100 is a stereo, 100 watt per channel Control Amplifier that produces 200 watt per channel into 4 Ohms and drives speaker loads as low as 1.5 Ohms. It has a damping factor that exceeds 1000 and is capable of driving any moderate loudspeaker to live orchestral crescendo levels. The GCC-100 has an input impedance of 47K Ohms, and features 4 RCA and 1 XLR balanced input and an auxilliary output to drive another amplifier or a subwoofer. It can be remotely turned on/off with a simple 12 volt trigger or the supplied remote control, is a fully balanced amplifier with noise levels low enough that you’ll have to place your ear next to the tweeter to even hear if it’s working. The GCC-100 is a perfect music center for the most discerning stereo system and has the best midrange and top end of any of the three models (although they're all great) Learn More
    $900.00

  • Marantz 15
    $920.00

  • Nakamichi PA-1 Five-Channel Power Amp

    Nakamichi PA-1 Five-Channel Power Amp

    Nakamichi PA-1 Five-Channel Power Amp 5 channel amp at 100W per channel Uses either bare wire or banana connections to speakers RCA inputs for front (L/R), center (mono) and rear (L/R) Remote power on/off control 1/8" input and output Uses standard IEC power cable Dimensions: 17" x 16.5" x 8.5 Weight 48lbs Made In Japan Learn More
    $925.00

  • Marantz Model Fifteen Solid State Power Amplifier

    Marantz Model Fifteen Solid State Power Amplifier

    Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 60kHz Total harmonic distortion: 0.1% Damping factor: 150 Input sensitivity: 1V Signal to noise ratio: 90dB Learn More
    $945.00

Grid  List 

Items 1 to 50 of 209 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page