High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

Mcintosh MC250 Zoom

Mcintosh MC250

Be the first to review this product

SKU: Mcintosh MC250
Mcintosh MC250 nice condition

Mclntosh audio power ratings are in accordance with
the Federal Trade Commission Regulation of November
4, 1974 concerning power output claims for amplifiers
used in home entertainment products.
POWER OUTPUT
STEREO
50 watts minimum sine wave continuous
average power output, per channel, both
channels operating into 4 ohms, 8 ohms,
or 16 ohms load impedance, which is:
14.1 volts RMS across 4 ohms
20.0 volts RMS across 8 ohms
28.3 volts RMS across 16 ohms
MONO
100 watts minimum sine wave continuous
average power output, operating into 2
ohms, 4 ohms, or 8 ohms load impedance,
which is:
14.1 volts RMS across 2 ohms
20.0 volts RMS across 4 ohms
28.3 volts RMS across 8 ohms
OUTPUT LOAD IMPEDANCE
STEREO
4 ohms, 8 ohms, or 16 ohms; separate terminals
are provided for each output
MONO
2 ohms, 4 ohms, or 8 ohms; separate
terminals are provided for each output
RATED POWER BAND
20 Hz to 20,000 Hz
TOTAL HARMONIC DISTORTION
STEREO
0.25% maximum harmonic distortion at
any power level from 250 milliwatts to 50
watts per channel from 20 Hz to 20,000 Hz,
both channels operating
MONO
0.25% maximum harmonic distortion at
any power level from 250 milliwatts to 100
watts from 20 Hz to 20,000 Hz
INTERMODULATION DISTORTION
STEREO
0.25% if instantaneous peak power output is 100 watts
or less per channel with both channels operating for
any combination of frequencies 20 Hz to 20,000 Hz
MONO
0.25% if instantaneous peak power output is 200 watts
or less for any combination of frequencies 20 Hz to
20,000 Hz
FREQUENCY RESPONSE (at 1 watt output)
20 Hz to 20,000 Hz +0 -0.25 dB
10 Hz to 100,000 Hz +0 -3.0 dB
NOISE AND HUM
90 dB below rated output
RATINGS
OUTPUT VOLTAGES
Stereo and Mono
25 volts for distribution lines
DAMPING FACTOR
15 at 3 ohms output
38 at 8 ohms output
17 at 16 ohms output
INPUT IMPEDANCE
200,00 Ohms
INPUT SENSITIVITY
0.5 volt. Level control provided for higher input voltage
GENERAL INFORMATION
POWER REQUIREMENTS
120 volts, 50/60 Hz, 50 watts at zero signal output, 250
watts at rated output
SEMICONDUCTOR COMPLEMENT
24 silicon transistors
18 silicon rectifiers and diodes
MECHANICAL INFORMATION
SIZE
7 1/16 inches high (17.94 cm), 105
/8 inches wide (26.99
cm), 155
/8 inches deep (39.69 cm)
CHASSIS
Chrome and black
WEIGHT
36 pounds (16



Vintage Amplifier 50w/ch stereo. 100w mono. Response 20-20kHz (+0 -0.25dB).

Availability: In stock

$800.00
Product Description

    Details

    Mcintosh MC250 stereo power amplifier tested, nice good condition
Additional Information

    Additional Information

    Call For Price No
CMS tab