High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

solid state

Grid  List 

Items 1 to 100 of 126 total

Page:
  1. 1
  2. 2
per page
  • Krell (all models)

    Krell (all models)

    We are authorized dealers for all Krell products. Please inquire about any product. Learn More
    $999,999.99

  • Moon SimAudio 888 Mono Amplifiers

    Moon SimAudio 888 Mono Amplifiers

    Moon SimAudio 888 Mono Amplifiers Cost no object design i $120000 retail Approximately one year old , as new in the flight cases Inquire for freight options Learn More
    $68,000.00

  • Krell MRA Master Reference  mono amplifiers

    Krell MRA Master Reference mono amplifiers

    Krell MRA mono amplifiers. The best Krell ever made. Only 50 were made I read somewhere. These were $150,000/pair when new. price is for both We have the crates. They are at the Krell factory and will ship there directly to your door after being recapped. As of 1/22 because of the worldwide pandemic situation the capacitors we prefer using are on backorder. So you may purchase these but we don't have an exact delivery date These are the best Krell amplifiers ever made. Incredible size and weight 770 lbs each in the crate. serial 10199070016 Learn More
    $65,000.00

  • Krell KSA-i400  NEW REFERENCE!  IN STOCK!

    Krell KSA-i400 NEW REFERENCE! IN STOCK!

    Krell KSA-i400 NEW REFERENCE! IN STOCK! Please inquire for pricing and for trade-ins at (888)850-4366 Learn More
    $35,000.00

  • Burmester 909 IIIa stereo
    $25,000.00

  • Cello  Performance II amplifiers

    Cello Performance II amplifiers

    Cello Performance II amplifiers in 7/23 We will recap the amplifiers before shipping. very good condition, one owner since new Inquire for freight options Learn More

  • Luxman M-10X

    Luxman M-10X

    Luxman M-10X like new condition, factory packing and all Spec Rated output 150W + 150W (8Ω)/at stereo 300W + 300W (4Ω)/at stereo 600W (8Ω)/at monaural Instantaneous max. output 1,200W + 1,200W (1Ω)/at stereo 2,400W (2Ω)/at monaural Input sensitivity 1.24V/150W (8Ω) GAIN 29.0dB Input impedance Unbalanced 51kΩ Balanced 28kΩ Frequency response 20Hz to 20kHz (+0, -0.1dB) 1Hz to 130kHz (+0, -3.0dB) Total harmonic distortion 0.003% or less (1kHz/8Ω) 0.04% or less (20Hz to 20kHz/8Ω) S/N ratio (IHF-A) 117dB Amplification feedback circuit LIFES 1.0 Output configuration 3 stage Darlington 4 paralleled push-pull Damping factor 600 Power consumption 540W 290W (under no signal) 1.0W (at standby) External dimensions 440(W) x 224(H) x 488(D) mm front side knob of 2mm and rear side terminal of 38 mm included in depth Net weight 48.4kg Accessories Trigger cable (Modular/3.5mm Monaural) Power cable Speaker terminal Supported Y-lug terminal dimension Width of part a: 15mm or less Width of part b: 8mm or more * Connection may not be performed depending on the shape of the Y-lug terminal. Download $20000 USA retail Learn More
    $13,000.00

  • Goldmund Telos 300 Stereo Power Amplifier

    Goldmund Telos 300 Stereo Power Amplifier

    Goldmund Telos 300 Stereo Power Amplifier Silver Excellent Condition Original Box And Accessories Learn More
    $13,000.00

  • Krell Solo 375XD mono amplifiers sold

    Krell Solo 375XD mono amplifiers sold

    Krell Solo 375XD mono amplifiers like new condition, all packing and accessories sold Retail $25000/pair Learn More
    $12,000.00

  • Mark Levinson 33h mono pair

    Mark Levinson 33h mono pair

    Mark Levinson 33h mono pair recapped all caps except large filter capacitors (rarely go bad, long life) and changed the relays. 9/2023 custom crated, inquire for freight options Learn More
    $10,800.00

  • Halcro DM 68 mono single mode amplifiers sold

    Halcro DM 68 mono single mode amplifiers sold

    Halcro DM68 upgrade servicing (caps) 1/19 black pair , top of the line worldwide voltage inquire for actual trucking charges sold Learn More
    $9,999.00

  • Krell Audio Standard 2 coming soon

    Krell Audio Standard 2 coming soon

    Krell Audio Standard 2 coming soon 2/22 recapped approximately 3 years ago must ship freight inquire before purchasing please Learn More
    $9,000.00

  • PS Audio BHK 300 monos  including USA shipping  one pair and a single available

    PS Audio BHK 300 monos including USA shipping one pair and a single available

    PS Audio BHK 300 monos excellent with original boxes inquire for trucking pricing. I'ts safer Learn More
    $7,499.00

  • McIntosh MC1000 Mono Power Amplifier

    McIntosh MC1000 Mono Power Amplifier

    McInstosh MC1000 Mono Power Amplifier One amp works properly, one needs repair (we will get to it but then the price goes up) inquire for freight quote Power output: 1000 watts into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 200 Input sensitivity: 2.5V Signal to noise ratio: 115dB Speaker load impedance: 2Ω to 8Ω Dimensions: 264 x 438 x 511mm Weight: 47.6kg Learn More
    $7,000.00

  • Meridian 857

    Meridian 857

    Meridian 857 two years old when we received as new condition in original packaging. 2 available, price for each "Our most powerful reference two channel amplifier has been designed and built to deliver the best possible Hi-Res audio performance from any high-quality passive loudspeaker system. Its low-feedback construction provides ultra-low distortion, ensuring an unparalleled level of clarity and transparency across the audible range. Bridgeable to over 1.5Kw, the Meridian 857 features a totally new design for a Meridian power amplifier, borne out of extensive research, experience and a thorough understanding of psychoacoustic principles." Learn More
    $6,999.00

  • Krell Chorus 5200 XD 5 Channel Amplifier

    Krell Chorus 5200 XD 5 Channel Amplifier

    Like new condition all packing and accessories Frequency response 20 Hz to 20 kHz +0, –0.08 dB <0.5 Hz to 100 kHz +0, –3 dB Signal-to-noise ratio >95 dB, wideband, unweighted, referred to full power output >115 dB, “A”-weighted Gain 26.2 dB Total harmonic distortion <0.04% at 1 kHz, at 200 W, 8 Ω <0.15% at 20 kHz, at 200 W, 8 Ω Input impedance Single-ended: 100 kΩ Balanced: 200 kΩ Input sensitivity Single-ended or balanced: 1.96 V RMS Output power 200 W RMS at 8 Ω 360 W RMS at 4 Ω Output voltage 113 V peak-to-peak 40 V RMS Output current 13.4 A peak Slew rate 40 V/μs Output impedance <0.015Ω, 20 Hz to 20 kHz Damping factor >530, 20 Hz to 20 kHz, referred to 8W Power consumption Standby: 1 W Idle: 182 W Maximum: 2100 W Heat output Standby: 3.4 BTU/hr. Idle: 623 BTU/hr. Maximum: 7182 BTU/hr. Inputs 5 single-ended via RCA connector 5 balanced via XLR connector Outputs 5 pairs binding posts Dimensions 17.1 in. W x 7.65 in. H x 21.10 in. D 434 mm W x 194 mm H x 536 mm D Weight 95 lbs., 43.2 kg (shipping) 85 lbs., 38.6 kg (unit only) Learn More
    $6,800.00

  • Goldmund Mimesis 9.2 mono amplifiers

    Goldmund Mimesis 9.2 mono amplifiers

    Goldmund Mimesis 9.2 275 watts per channel mono block power amplifiers one of the best sounding amplifiers from this quality company Learn More
    $6,500.00

  • Krell FPB600

    Krell FPB600

    Krell FPB600 just recapped 12/23 excellent cosmetics We will crate this for shipment outside of the I95 corridor for an extra $225. 225lb shipping weight, inquire for freight options Learn More
    $5,999.00

  • Mark Levinson ML20

    Mark Levinson ML20

    Mark Levinson ML20 shippiing price is double the ship quote Learn More
    $5,999.00

  • Jeff Rowland Model 8

    Jeff Rowland Model 8

    Jeff Rowland Model 8 with flight case, over fedex and ups limits inquire for freight quote Learn More
    $5,500.00

  • Naim Audio NAP 300  and 300 PS

    Naim Audio NAP 300 and 300 PS

    NAP 300 Power Amplifier And 300 Power Supply: Analogue Inputs: (2) XLR Input Impedance: 18k Ohms Speaker Outputs: (2) L & R, 4mm "banana" sockets Power output: Continuous, 8 Ohms: 90 Watts per channel Transient: 500VA Quiescent Consumption: 27VA Voltage Gain: +29dB Frequency response: -3dB @ 2Hz and 70kH Minimum Load Impedance: 2 Ohms Mains supply: 100-120V or 220-240V, 50/60Hz Dimensions (H x W x D): NAP 300 and the NAP 300PS - 87 x 432 x 314mm Shipping Specs for the NAP 300 Stereo Power Amplifier: Dimensions: 23” D x 19” W x 9” H Weight: 28 lb Shipping Specs for the NA PS300 Power Supply: Dimensions:23” D x 19” W x 9” H Weight: 39 lb Learn More
    $5,500.00

  • Krell 402

    Krell 402

    Krell 402 silver (1 available 6/22) We can provide this in any voltage worldwide. Black (1 available 11/22) Learn More
    $4,999.00

  • Swiss Physics 6a amplifier and 5 preamplifier package

    Swiss Physics 6a amplifier and 5 preamplifier package

    Swiss Physics 6a amplifier and 5 preamplifier package. This company was founded by the engineers from goldmund rarely available. spectacular sounding Learn More
    $4,900.00

  • STAX SRM-T8000 headphone amplifier

    STAX SRM-T8000 headphone amplifier

    Almost no use, this is the top of the line Stax headphone amplifier in the original double box The SRM-T8000 is STAX new designed top-of-the-line driver unit. For the first time in STAX driver unit history, the large-sized toroidal transformer and non-magnetic aluminum chassis have been adopted for unclouded clear tone quality! A newly developed large-sized aluminum insulator, combined with new material of high isolation efficiency and grip power, make this flagship designed SRM-T8000 a top performer. Features: • The full-balanced transmission of hybrid amplifier configuration with 6922 dual triode tube of established reputation for the first stage and class-A operating semiconductor at output stage realized ultra low-noise, accurate and rich musical expression. • The vacuum tube of the first stage was mounted on the independent board in order to shut out vibration and external noise. Further, noise has been totally eliminated by vibration-proofing damper and vacuum tube shield cover which are used also for a hard disk etc. • The large-sized toroidal transformer - for the first time in STAX driver unit history - as well as non-magnetic aluminum chassis has been adopted for unclouded clear tone quality. • Four pairs of inputs are equipped. (Notes: LINE4 is an optional slot for future purpose. As for now, release is not yet determined.) • The SRM-T8000 features the EXTERNAL (BYPASS) function which passes the volume controller of the unit and enables volume control through external equipments. • The newly developed large-sized aluminum insulator, combined with new material of high isolation efficiency and grip power, has been employed. Specifications: Frequency response: 1Hz - 115kHz / when used with one earspeaker Rated input level: 100mV (at 100V output) Maximum input level: 30Vrms. / at minimum volume Gain: 60dB Harmonic distortion: 0.01% or less / 1kHz / when used with one earspeaker Input impedance: 50kO / 50kOx 2 (XLR input) Maximum output voltage: 470Vrms Mains voltage: AC120V, 50/60Hz Power consumption: 58W (95W with optional slot) Operating temperature: 0 to 35 degrees C (less than 90% humidi- ty, non condensing) Dimension: 320 (W) x103 (H) x395 (D) mm (protruding portion included) Weight: 7.3kg Learn More
    $4,600.00

  • Mark Levinson 532h

    Mark Levinson 532h

    Mark Levinson 532h New in 2019 with receipt from authorized dealer for balance of factory warranty Excellent condition in factory box. Many of these for sale are much older out of warranty period. Learn More
    $4,600.00

  • Parasound JC1 3 Available

    Parasound JC1 3 Available

    Parasound JC1 inquire with postal code for freight price for each to ship Learn More
    $4,500.00

  • Mcintosh MC2300 rare gold faceplate

    Mcintosh MC2300 rare gold faceplate

    Mcintosh MC2300 rare gold faceplate In 9/22 we will recap this unit before shipping pics soon Learn More
    $4,400.00

  • Spectral DMA250 inquire

    Spectral DMA250 inquire

    Spectral DMA250, used factory carton, I can voltage convert prior to shipping. INQUIRE IF STILL AVAILABLE BEFORE PURCHASING. http://www.spectralaudio.com/dma-250.htm SPECIFICATIONS DMA-250 Stereo Power Amplifier Power Output: (continuous) @ 8 ohms - 200 Watts RMS @ 4 ohms - 350 Watts RMS @ 2 ohms - 570 Watts RMS Output Current: 60 Amps peak per channel Frequency Response: ±0.1 dB, DC-150 KHz ±1 dB, DC-1 MHz ±3 dB, DC-1.8 MHz Distortion: Static: Less than 0.015% from DC to 100 KHz, typically 0.009% @ 200 WRMS/8 ohms Dynamic: 8 Tone Cluster Test 20 KHz @ 500 Hz separation; 0.01% 8 ohms; 0.015% 4 ohms Speed: Rise Time: Less than 400 nanoseconds Settling: 1.5 microseconds to -40dB Slew Rate: 600 volts/microsecond Noise: Signal to Noise: 97dB unweighted, 107dB ASA A Crosstalk: 98dB @ full power 8 ohms Input: Impedence: 100K ohms in parallel with 100 pf Sensitivity: 1.5 volts/nominal output Power Supply: Line Voltage: 100 volts, 120 volts, 240 volts (factory set) AC Voltage Range: ±10% Maximum Consumption: 1600 Watts Quiescent Consumption: 250 Watts Operating Temp: 0° to 50° Celsius range; 32° to 122° Farenheit Protection Features: DC Protection Servo: 0.5 volt range Current Limit Onset: 60 Amps Thermal Threshold: Protects at 85° Celsius, 185° Farenheit AC Main Fuses: 2 @ 2-1/2A 3 AG slo-blo, for 100 - 120 VAC 2 @ 1-1/4A 3AG slo-blo, for 220-240 VAC Size and Weight: Dimensions: 48.22cm (19")W x 18.4cm (7 1/4")H x 45.8cm (18")D Weight: 62 lbs, 28.1 KG Net Learn More
    $4,400.00

  • Perreaux Prisma 350

    Perreaux Prisma 350

    Perreaux Prisma 350 owner's manual: https://mail.google.com/mail/u/0/#search/prism+perreaux?projector=1 Learn More
    $4,300.00

  • Mark Levinson No 433 three channel

    Mark Levinson No 433 three channel

    Mark Levinson No 433 with box/packing. Not used last ten years Learn More
    $4,300.00

  • Cello HTA-3  3 channel amplifier

    Cello HTA-3 3 channel amplifier

    Cello HTA-3 channel amplifier 200 watts / channel x 3 channels, rare Learn More
    $3,999.00

  • Jeff Rowland Model 7 series mono amplifiers (two pairs in service)

    Jeff Rowland Model 7 series mono amplifiers (two pairs in service)

    Jeff Rowland Model 7 two pairs in service 1/24 inquire. one pair silver, one pair The shipping must be quoted. Please send you postal code. Learn More
    $3,700.00

  • Krell KSA250 improved

    Krell KSA250 improved

    Krell KSA250 with KSA300s internal boards overhaul completed 8/23 Learn More
    $3,700.00

  • Spectral DMA-180 Stereo Power Amplifier

    Spectral DMA-180 Stereo Power Amplifier

    Spectral DMA-180 Stereo Power Amplifier Power Output: (continuous) @ 8 ohms - 200 Watts RMS @ 4 ohms - 400 Watts RMS @ 2 ohms - 683 Watts RMS Output Current: 60 Amps peak per channel Frequency Response: ±0.1 dB, DC-150 KHz ±1 dB, DC-1 MHz ±3 dB, DC-1.8 MHz Distortion: Static: Less than 0.015% from DC to 100 KHz Typically 0.009% @ 200 WRMS/8 ohms Dynamic: 8 Tone Cluster Test 20 KHz @ 500 Hz separation; 0.01% 8 ohms; 0.015% 4 ohms Speed: Rise Time: Less than 400 nanoseconds Settling: 1.5 microseconds to -40dB Slew Rate: 600 volts/microsecond Noise: Signal to Noise: 97dB unweighted, 107dB ASA A Crosstalk: 98dB @ full power 8 ohms Input: Impedence: 100K ohms in parallel with 100 pf Sensitivity: 1.5 volts/nominal output Power Supply: Line Voltage: 100 volts, 120 volts, 240 volts (internal wiring) AC Voltage Range: ±10% Maximum Consumption: 1600 Watts Quiescent Consumption: 250 Watts Operating Temp: 0° to 50° Celsius range; 32° to 122° Farenheit Protection Features: DC Protection Servo: 0.5 volt range Current Limit Onset: 40 Amps Thermal Protect Threshold: 85° Celsius, 185° Farenheit AC Main Fuses: 2 @ 4A 3AG slo-blo, for 100 - 120 VAC, 2 @ 2A 3AG slo-blo, for 220 - 240 VAC Fuse Status: LED indicator (2) Size and Weight: Dimensions: 48cm (19")W x 17cm (6 1/4")H x 48cm (19")D Weight: 60 lbs, 27.2 KG Net Learn More
    $3,500.00

  • Krell FPB300
    $3,500.00

  • Krell Evolution 400 Mono Amplifier
    $3,500.00

  • Krell FPB350mcx mono single amplifier ONE AMP ONLY

    Krell FPB350mcx mono single amplifier ONE AMP ONLY

    Krell FPB350mc one mono amp only excellent condition best shipped by truck, inquire Learn More
    $3,500.00

  • Mark Levinson No. 27.5  Stereo Power Amplifier

    Mark Levinson No. 27.5 Stereo Power Amplifier

    Mark Levinson No. 27.5 Stereo Power Amplifier Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 4Hz to 122kHz Total harmonic distortion: 0.3% Gain: 26.9 dB Dimensions: 483 x 185 x 360mm Weight: 43.1kg Year: 1992 Learn More
    $3,395.00

  • Jeff Rowland Research Model 3 Monoblock Pair
    $3,150.00

  • Mark Levinson 383 integrated with remote

    Mark Levinson 383 integrated with remote

    Mark Levinson 383 with remote two available as of 6/23 Learn More
    $3,100.00

  • Krell KSA150

    Krell KSA150

    Krell KSA150 fresh recap on one 12/23 2 available the other not recapped excellent cosmetics on that one. Learn More
    $3,100.00

  • Mcintosh MC2002 Stereo Power Amplfier

    Mcintosh MC2002 Stereo Power Amplfier

    Mcinttosh MC2002 200 watt channel must truck , if not local box must be ordered from Mcintosh Learn More
    $3,000.00

  • Krell KSA 200B Stereo Power Amplifier

    Krell KSA 200B Stereo Power Amplifier

    Inputs: RCA and Balanced Power output: 200 watts per channel into 8Ω (stereo); 400w/ch into 4 ohms, 800w/ch into 2 ohms and 1600w/ch into 1 ohm Learn More
    $3,000.00

  • Plinius SA102

    Plinius SA102

    Plinius SA102 One owner, all excellent condition Learn More
    $2,999.00

  • Krell FPB350m single mono
    $2,999.00

  • Krell KMA-100 MK2 Monoblocks

    Krell KMA-100 MK2 Monoblocks

    Krell KMA-100 MK2 Monoblocks Class A 100W/Channel Silver Learn More
    $2,950.00

  • Goldmund 8.5 with a2 modules
    $2,950.00

  • Mark Levinson 331

    Mark Levinson 331

    Mark Levinson 331 recently serviced by factory authorized center Learn More
    $2,900.00

  • Balanced Audio Technology VK-250

    Balanced Audio Technology VK-250

    Balanced Audio Technology VK-250, excellent condition Learn More
    $2,899.00

  • Mcintosh MC7270   three  available inquire

    Mcintosh MC7270 three available inquire

    Mcintosh MC7270 One in excellent 8/22 One in service 6/22 awaiting new factory glass, main output filter caps will be changed out also. Original box from Mcintosh if shipped, inquire for freight cost Too fragile for Fedex or UPS ground. Learn More
    $2,850.00

  • Anthem P2

    Anthem P2

    Anthem P2 retail $4500 in very good condition Learn More
    $2,800.00

  • Mark Levinson 332

    Mark Levinson 332

    Mark Levinson 332 picked up 1/22 from original owner Learn More
    $2,799.00

  • Devialet Expert 200

    Devialet Expert 200

    Devialet Expert 200, original box/packing, excellent condition Learn More
    $2,700.00

  • Mark Levinson 23 recapped 100v (Japan ideally)  sold ?

    Mark Levinson 23 recapped 100v (Japan ideally) sold ?

    excellent condition Mark Levinson 23 200 watt/channel amplfiier, 100V set at present, can be changed Description: Solid-state stereo power amplifier. Rated power output: 200Wpc continuous into 8 ohms (23dBW) with less than 0.1% THD, 400Wpc continuous into 4 ohms (23dBW) with less than 0.2% THD, both from 20Hz–20kHz, both channels driven. Damping factor: greater than 600 at 50Hz, 8 ohms (equivalent to an output impedance of 0.013 ohms). Frequency response: 4Hz–140kHz, —dB. Input impedance: 50k ohms shunted by 1.5nF. Voltage gain: 26dB (load not defined). Input sensitivity: 141mV for 1W output. Dimensions: 19" (483mm) W by 8.25" (210mm) H by 15.7" (399mm) D. Shipping weight: 105 lbs (48kg). Learn More
    $2,700.00

  • Krell FPB250M mono EACH AMP

    Krell FPB250M mono EACH AMP

    Krell FPB250M excellent like new cosmetics Recapped! factory boxes MULTIPLE AVAILABLE Power output: 250W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Gain: 26.4 dB Input sensitivity: 2.14V Signal to noise ratio: 114dB Dimensions: 318 x 267 x 406mm Weight: 31kg Learn More
    $2,600.00

  • Mcintosh MC2505

    Mcintosh MC2505

    Mcintosh MC2505 in beautiful condition, one owner in 3/23 New box and packing ordered from Mcintosh 3/23 optional wood case pictured $350 additional plus shipping Learn More
    $2,600.00

  • Threshold SA/3 Class A

    Threshold SA/3 Class A

    Threshold SA/3 50watt/channel Stasis Pure Class A Power Amplifier. This amplifier, designed by Nelson Pass and Built in the USA by Threshold employs pure Class A circuitry at every stage - there is no corrective feedback loop Learn More
    $2,500.00

  • Crown Reference 1

    Crown Reference 1

    Crown Reference 1 in service 9/21 Inquire before purchasing Reference I (120 V, 60 Hz models) The Crown® Studio Reference I power amplifier shall be a solid-state two-channel model employing multi-mode (AB+B) grounded bridge(TM) output circuitry with a variable impedance (VZ) power supply for each channel. The outputs shall be switchable as stereo, bridged-mono or parallel-mono modes of operation. The bridged-mono mode shall bridge the outputs to provide increased output voltage. The parallel-mono mode shall parallel the outputs to provide increased output current. The output impedance of each channel shall be less than 10 milliohms in series with less than 2 microhenries in stereo mode. The variable impedance power supplies shall reduce unnecessary voltage across the output devices by automatically switching to a parallel mode when less voltage is required by the output circuitry and to a series mode when more voltage is required. The amplifier shall contain protection circuitry which limits the drive level placed on the output devices before their SOA (Safe Operating Area) is exceeded. This protection circuitry shall calculate the instantaneous voltage across and current through the output devices while factoring in their simulated junction temperatures to predict how close they are to their operating limits. This protection will be called “ODEP.” The amplifier shall contain controlled slew-rate voltage circuitry to protect it against radio frequency interference burnouts. It shall also be protected from current overload at its output stage. The slew rate of the amplifier shall be greater than 30 volts per microsecond in stereo mode. The amplifier shall temporarily go into a stand-by mode if its power transformer becomes excessively hot and shall automatically resume normal operation once it has cooled to a safe operating temperature. Front-panel controls shall include an enable on/off switch and a detented input level control for each channel. Rear-mounted controls shall include a ground lift switch to isolate the signal ground from the chassis ground, a switch which selects between stereo, bridged-mono and parallel-mono modes of operation and a reset switch for the AC mains circuit breaker. Internal controls shall include an input sensitivity switch to select between 0.775 V, 1.4 V or a fixed voltage gain of 26 dB for full rated output. A Crown P.I.P. and P.I.P.2-compatible expansion connector shall be provided behind an access panel in the rear to accept auxiliary input modules. It shall be fully compatible with the Crown IQ System. Front panel indicators shall include an amber power enable indicator, an amber ODEP protection system indicator for each channel which shall normally be illuminated to confirm the availability of reserve thermodynamic energy and which shall dim in proportion to limiting when the power demands of the output stages have been exceeded, a green IOC indicator for each channel, and a green Signal indicator for each channel which shall normally flash at moderate intensity to show the presence of an audio signal. The power amplifier shall meet or exceed the following performance criteria. Input sensitivity for rated output: 26 dB voltage gain (unbalanced). Rated FTC output in stereo mode with less than 0.1% THD: 780watts per channel (20 Hz to 20 kHz) into 8 ohms. Hum and noise: at least 120 dB (A weighted) below full rated output power. Phase response: +5 to –15 degrees from 20 Hz to 20 kHz at 1 watt. Frequency response: 20 Hz to 20 kHz, 0.1 dB at 1 watt into 8 ohms per channel in stereo mode. Damping factor: greater than 20,000 from 10 to 200 Hz into 8 ohms. Intermodulation distortion (SMPTE): less than 0.005% from full bandwidth power to 78 watts rising linearly to better than 70 dB at 20 kHz. Harmonic distortion: less than 0.02% at rated low-distortion 1 kHz power. The amplifier shall be safe when driving any kind of load—even highly reactive ones. The power requirements shall be 120 VAC at 60 Hz. At idle, the amplifier shall draw 90 watts or less. The amplifier chassis shall be constructed of steel with a durable black finish and shall be designed for flow-through fan-assisted ventilation from the front panel to the side panels. The amplifier shall have an aluminum front panel with super-gloss Imron finish and Lexan overlay. The dimensions of the amplifier shall allow for 19 inch (48.3 cm) EIA standard (RS- 310-B) rack mounting. The amplifier shall be 7 inches (17.8 cm) tall, 16 inches (40.6 cm) deep behind the rack-mounting surface, and 2.75 inches (7 cm) in front of the rack-mounting surface. The amplifier shall weigh 60 pounds, 11 ounces (27.6 kg) and shall have a center of gravity approximately 6 inches (15.2 cm) behind the front panel. The amplifier shall be designated the Crown Studio Reference Learn More
    $2,500.00

  • Mcintosh MC7150 Digital Dynamic Stereo Power Amplifier sold ?
    $2,500.00

  • Mark Levinson No. 27 Stereo Power Amplifier

    Mark Levinson No. 27 Stereo Power Amplifier

    Mark Levinson No. 27 Stereo Power Amplifier Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 4Hz to 122kHz Total harmonic distortion: 0.1% Gain: 26 dB Dimensions: 444.5 x 407.8 x 185.6mm Year: 1989 75Lbs Learn More
    $2,495.00

  • Goldmund VSR Mono Power Amplifiers

    Goldmund VSR Mono Power Amplifiers

    Goldmund VSR Mononoblock Power Amplifiers Silver Faceplate Great Condition Learn More
    $2,495.00

  • Krell KSA80 Balanced

    Krell KSA80 Balanced

    Krell KSA80B One owner all original excellent condition We can recap for $500 additional if desired before shipping. Later balanced version Learn More
    $2,400.00

  • Krell Altair

    Krell Altair

    Krell Altair Reference $5500 low profile amplifier with separate power supply from the 1990's. Original boxes Designed as a reference amplifier for apartment sized systems. Power suppy caps just recapped. IN REPAIR Learn More
    $2,370.00

  • Goldmund SR150 Stereo Power Amplifier

    Goldmund SR150 Stereo Power Amplifier

    Power output: 200 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 1000kHz Total harmonic distortion: 0.01% Input sensitivity: 0.75V Signal to noise ratio: 100dB Dimensions: 440 x 330 x 90mm Weight: 13kg Year: 2005 Learn More
    $2,300.00

  • Goldmund A2 modules (original, new gold)

    Goldmund A2 modules (original, new gold)

    Goldmund A2 modules (original, new gold) I purchased these sequential modules from the former Goldmund distributor they are a NOS (new old stock pair) Learn More
    $2,300.00

  • Classe Audio Twenty Five 25 Stereo Power Amplifier

    Classe Audio Twenty Five 25 Stereo Power Amplifier

    Power output: 250 watts per channel into 8Ω (stereo), 1000 watts into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: 1.6V Signal to noise ratio: 100dB Speaker load impedance: 4Ω (minimum) Dimensions: 19 x 20.75 x 8 inches Weight: 65lbs Learn More
    $2,200.00

  • Audio Research SD135

    Audio Research SD135

    Audio Research SD135 excellent condition, original box $5000 retail in 1/23 Learn More
    $2,200.00

  • Odyssey Audio upgraded Kismet in Khartago chassis  Monoblock Pair

    Odyssey Audio upgraded Kismet in Khartago chassis Monoblock Pair

    These have the upgraded black circuit boards with high end caps from symphonic line, high quality parts internally. these are cut and paste from the web specs I found. Hope they are accurate 1 x 110 Watts RMS @ 8 Ohms (each) 2 Ohm load stable Class A/AB 1 - 600,000 Hz frequency range 120,000µF memory (each) 120 amps current delivery <0.04% THD (not audible) >800 continuous damping factor Input impedance 22K ohms DC offset <1 mV RCA inputs 400 VA Plitron transformer (each) Sanken Epitaxial Planar Transistors 2SA1216 & 2SC2922 Anti vibration dual thickness PCB Power consumption when idle ±30Watts 4 internal fuses 250V/6.3A, 5x20mm, fast blow 18"W x 16"D x 4 1/4"H weighs 32 pounds. Learn More
    $2,195.00

  • T+A PA1230R

    T+A PA1230R

    PA1230R Integrated Amplifier At a time when many manufacturers are using microprocessor technology to bury functions below several software layers so you need to have an owners’ manual close at hand if you want to access them, T+A has delivered an amplifier where each function has its own control, properly and clearly labelled, on the front panel. This necessarily means there are quite a few knobs and buttons, but rarely has an amplifier been so easy to use. This is especially the case because the PA1230R is one of the very few amplifiers available that allows you to adjust bass and treble individually for the left and right channels. Learn More
    $2,000.00

  • Krell KAV-500 5 Channel Amplifier

    Krell KAV-500 5 Channel Amplifier

    sold 12/23 another kav500/5 available 1/24 Krell KAV-500/5 Krell KAV-500 Multichannel Amplifier 100 Watts/Channel into 8 Ohms, 200 Watts into 4 Ohms 400 Watts/Channel bridged (2 channels) Mfr FR 20 Hz - 20 kHz ± 0.5 dB THD < 0.03% Input Impedance 100 kOhms Size: 6.25" H x 19" W x 17" D Weight: 47 pounds Learn More
    $2,000.00

  • Mcintosh 2205 new restoration from original owner.

    Mcintosh 2205 new restoration from original owner.

    Mcintosh 2205 just recapped replaced amp coupling caps Original owner on all. Wood case $350 plus shipping extra. Power output: 200 watts per channel into 8Ω (stereo), 400W into 8Ω (mono) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.1% Damping factor: 16 Input sensitivity: 0.75V Signal to noise ratio: 95dB Speaker load impedance: 1Ω to 8Ω Learn More
    $1,999.00

  • Perreaux PMF5150B 500 watts/channel
    $1,999.00

  • NAIM Audio NAP 250. 2 Power Amplifier

    NAIM Audio NAP 250. 2 Power Amplifier

    Damping factor into 8 36 Signal to noise ratio ref 100W 8 A-weighted 111dB Signal to noise ratio ref 1W 8 A-weighted 91dB Input signal for clipping 1V RMS Peak current into 1 (1kHz 1mS) +/-28 amps peak (780W peak power) Burst power 2 300 Watts 2 @1% THD+N (1kHz for 20mS, repeat 500mS IHF) Audio Inputs 2 x True balanced via XLR, 47k 34k singled ended via legacy adaptor lead Audio Outputs Crosstalk 60 dB THD + N at 2/3rds full power 8 @1kHz (0.013%) Power Output 100 Watts 8 @0.1% THD+N (100W @0.1%) 190 Watts 4 @1% THD+N Frequency Response -3dB @ 1.4Hz to 100kHz Gain +29 dB Physical Weight 37.04lbs (16.8kg) Dimensions (HxWxD) 35/8x17x121/2" (9.15x43.2x31.75cm) Power Mains Supply 115V or 230V, 50/60Hz Power Consumption Passive consumption: 26W (idle) Standby consumption: <0.5W Product Type Type Power Amplifier Learn More
    $1,995.00

  • Krell KAV-2250

    Krell KAV-2250

    Krell KAV-2250 silver with box last one, inquire to make sure still available Learn More
    $1,950.00

  • Parasound Halo A21 2 Channel Power Amplifier  2 available

    Parasound Halo A21 2 Channel Power Amplifier 2 available

    Parasound Halo A21 2 Channel Power Amplifier Continuous power output: 250 watts RMS x 2, 20 Hz - 20 kHz, 8 Ω, all channels driven 400 watts RMS x 2, 20 Hz - 20 kHz, 4 Ω, all channels driven 750 watts RMS x 1, 20 Hz - 20 kHz, 8 Ω Current capacity: 60 amperes peak per channel Power bandwidth: 5 Hz - 100 kHz, +0/-3 dB at 1 watt Total harmonic distortion: < 0.2 % at full power IM distortion: balanced 16 V rms < 0.04 % Slew rate: > 130 V/µsecond Dynamic headroom: > 1.5 dB Interchannel crosstalk: > 80 dB at 1 kHz; > 63 dB at 20 kHz Input sensitivity: 1 V for 28.28 V, THX Reference Level Input impedance: 33 k Ω unbalanced; 66 k Ω balanced S/N ratio: 112 dB, input shorted, IHF A-weighted Damping factor: > 1100 at 20 Hz Voltage: 110V - 120V Dimensions: 17-1/2" w x 7-5/8" h x 20" d, 7" h without feet Net weight: 60 lb. Learn More
    $1,895.00

  • Nakamichi Stasis PA 7 Stereo Power Amplifier

    Nakamichi Stasis PA 7 Stereo Power Amplifier

    Nakamichi Stasis PA 7 Stereo Power Amplifier Power output: 200 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Damping factor: 60 Input sensitivity: 2V Signal to noise ratio: 120dB Semiconductors: 16 x output transistors per channel Dimensions: 435 x 200 x 421mm Weight: 27kg Learn More
    $1,895.00

  • Meridian G57 amplifier   ( 3available)

    Meridian G57 amplifier ( 3available)

    Meridian G57 amplifier ( 3available) as of 4/23 Learn More
    $1,800.00

  • Plinius 8200P MKII stereo amplifier (4 available)

    Plinius 8200P MKII stereo amplifier (4 available)

    Plinius 8200P MKII stereo amplifier (4 available) Learn More
    $1,750.00

  • Bryston 4B e

    Bryston 4B e

    Bryston 4B e 4be (commercial version , balanced looks like 4bst to me) 2 available 2/22 used in a home only Learn More
    $1,750.00

  • Mark Levinson ML9

    Mark Levinson ML9

    Mark Levinson ML9 in beautiful condition we can convert to a voltage other than 120v if you need Learn More
    $1,699.00

  • Plinius 8200P Stereo Power Amplifier

    Plinius 8200P Stereo Power Amplifier

    Plinius 8200P Stereo Power Amplifier Black Very Good Condition Learn More
    $1,600.00

  • Pioneer Series 20  M-22
    $1,599.00

  • Threshold S200 Power Amplifier

    Threshold S200 Power Amplifier

    Threshold S200 Power Amp Silver Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 7Hz to 100kHz Total harmonic distortion: 0.1% Gain: 26.6 dB Signal to noise ratio: 100dB Semiconductors: 8 x transistors per channel (output) Dimensions: 8.72 x 19 x 9.125 inches Weight: 44lbs Year: 1984 Learn More
    $1,500.00

  • Mark Levinson ML11

    Mark Levinson ML11

    Mark Levinson ML11 power amplifier . With its 2 x 50W in a small enclosure with the heat sinks hidden inside makes it look shy, but it's not. It another great amplifier of MLAS which is perfect as an all-purpose home hifi amplifier. As the others he can drive almost any load. Specifications Power output: 2 x 50W. Weight: 11Kg Maximum power : 260W. Learn More
    $1,480.00

  • SUMO The Nine + Differential Power Amplifier

    SUMO The Nine + Differential Power Amplifier

    SUMO The Nine + Differential Power Amplifier Sumo gives you the real thing. The nine is a pure class A power amplifier that remains class A even when driving 4 Ohm loudspeakers. The Nine's approach to class A is so unique it earned a US patent - an amazing achievement for an audio component. Sumo's exclusive class A engineering provides all the advantages and none of the disadvantages of typical class A designs. The unit features an all aluminium anodized chassis with massive extruded heat sinking and built in whisper fan for efficient heat dissipation. Military grade G-10 glass epoxy printed circuit boards throughout. Power supply incorporating 1.4KW shielded toroidal transformer and 42,000 microfarad computer grade filter capacitors, resulting in supply voltage regulation better than 3%. Learn More
    $1,400.00

  • Bedini BA-803  2 available Class A operation 250 watts/channel

    Bedini BA-803 2 available Class A operation 250 watts/channel

    Bedini BA-803 2 available excellent cosmetics, unused last twenty years. Original boxes. 250 watts Class A Operation Learn More
    $1,399.00

  • Audio Alchemy DPA-2 black NEW  325 watts/channel

    Audio Alchemy DPA-2 black NEW 325 watts/channel

    Audio Alchemy DPA-2 black NEW 325 watts/channel Factory sealed new $2500 retail Power Output/Channel (1% Thd+N, 1 Khz): (Stereo 325W/ch @ 4Ohms) / (Mono 625W @ 8Ohms) Frequency Response: 5hz-20khz +/- 0.2dB Nominal Thd+N (1 Watt Into 8Ω): 0.003% Signal-to-Noise Ratio (1 Khz): 94dB Input Impedance: RCA=12K, XLR=19K Output Impedance: 0.03 Ohms @ 1KHz Channel Separation (1 Khz): 70dB @ 1KHz / n/a Gain: Stereo 24dB/30dB – Mono 18dB/24dB Inputs: Unbalanced RCA, Balanced XLR Outputs: Binding post 5-way Available Finishes: Black Dimensions (HxWxD) In: 02.00 x 17.50 x 15.00 including jacks Net Weight: 14.00 lbs The Alchemy DPA-2 Power Amplifier is about dynamic musicality, thanks to design that combines Class A circuit topology composed of discrete FETs and a linear power supply using a toroidal transformer. The pure analog input stage preserves all the detail and nuance of the most delicate passages. The Class D output stage with switching power supply results in impressive output combined with cool-running efficiency. Learn More
    $1,350.00

  • Audio Research D52B

    Audio Research D52B

    solid state amplifier, unused in over 20 years, very nice condition, tech checked 11/16 50 watts per channel minimum RMS (both channels operating) at 8 ohms from 1 Hz to 20 kHz with less than .25% total harmonic distortion. Typically less than .02% at rated power in midband. Approximate actual power available per channel at "clipping" (both ch. op.): 80 (4 ohms), 60 (8 ohms), 35 (16 ohms) Power bandwidth Frequency response 0.05 Hz to 100 Khz (-3 db) Input sensitivity 1.1 Volts RMS for rated power and load. Input impedance 30 Kohms (nominal). Output taps Output regulation Overall negative feedback Damping factor More than 500 at rated power and load (20 Hz to 20 kHz). (Effective internal impedance approximately .012 ohms.) Distortion Intermodulation distortion: Less than .1% at rated output (56.56 V p to p) and load (SMPTE method). THD and IMD both decrease with decreasing output. Slew rate Rise time Hum & noise Wide-band, unweighted, more than 90 dB below 50 watts at 8 ohms - power line components (hum) more than 80 dB below 50 watts at 8 ohms. Power supply energy storage Power requirements 105-120/210-240 VAC, 50/60 Hz, 600 watts maximum. 120 watts at idle. 300 watts at rated power. Other Dimensions 19" (48 cm) W x 5 ¼" (13 cm) H (standard rack mount panel size) x 10 ½ (26.7 cm) D (front panel back). Handles extend 1 ½" (3.8 cm) forward of the front panel. Weight 39 lbs. (17.7 kg) Net, 45 lbs. (20.5 kg) Shipping Learn More
    $1,300.00

  • Bryston 4b thx version

    Bryston 4b thx version

    Bryston 4b thx version Just recapped for like new sound and reliability Learn More
    $1,300.00

  • Crown D-150

    Crown D-150

    Crown D-150 excellent like new condiition Was in a rack since new. Learn More
    $1,180.00

  • Lexicon 501 same as Bryston 7Bst

    Lexicon 501 same as Bryston 7Bst

    Lexicon 501 same as Bryston 7Bst 500 watts/channel one mono amplifier Learn More
    $1,150.00

  • Kenwood L-07 monoblocks

    Kenwood L-07 monoblocks

    Kenwood L-07 For repair, selling the pair as is classics Power output: 150W into 8Ω (mono) Frequency response: 1Hz to 50kHz Total harmonic distortion: 0.008% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 120dB Speaker load impedance: 4Ω to 16Ω Dimensions: 200 x 155 x 390mm Weight: 13kg Learn More
    $999.00

  • Crown SA 2 Distinction Series Amplifier

    Crown SA 2 Distinction Series Amplifier

    Crown SA 2 Distinction Series Amplifier Very Good Condition Learn More
    $975.00

  • Marantz Model Fifteen Solid State Power Amplifier

    Marantz Model Fifteen Solid State Power Amplifier

    Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 60kHz Total harmonic distortion: 0.1% Damping factor: 150 Input sensitivity: 1V Signal to noise ratio: 90dB Learn More
    $945.00

  • Marantz 15
    $920.00

  • Nakamichi Stasis PA5 Amplifier

    Nakamichi Stasis PA5 Amplifier

    Nakamichi Stasis PA5 Amplifier Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 7Hz to 150kHz Total harmonic distortion: 0.1% Damping factor: 60 Input sensitivity: 1.4V Signal to noise ratio: 120dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 20 x transistors Dimensions: 435 x 135 x 368mm Weight: 16kg Learn More
    $899.95

  • Rotel RB-1582 Stereo Power Amplifier
    $899.00

  • Bryston 6b  Stereo Amplifier
    $860.00

  • Marantz sixteen 16
    $850.00

  • SUMO ANDROMEDA II POWER AMPLIFIER

    SUMO ANDROMEDA II POWER AMPLIFIER

    SUMO ANDROMEDA II POWER AMPLIFIER excellent cosmetics Our tech went through this and readjusted dc offset, bias Sumo Andromeda II: Solid-state stereo power amplifier. Rated power output: 240Wpc into 8 ohms (23.8dBW) with less than 0.05% THD, 400Wpc into 4 ohms (23dBW) with less than 0.1% THD, from 20Hz–20kHz. Intermodulation distortion (IMD): 0.05% from 0.25W to full power. Frequency response: ±0.1dB 20Hz–20kHz, –3dB from 0.1Hz–170kHz. Input impedance: 47k ohms. Input sensitivity: 1.8V RMS for rated output. Hum and noise: 110dB below rated power. Rise time: less than 2µs. Slew rate: 115V/µs. Damping factor: greater than 500. Dimensions: 19" W by 7" H by 16.75" D Weight (shipping): 55 lbs. Learn More
    $850.00

Grid  List 

Items 1 to 100 of 126 total

Page:
  1. 1
  2. 2
per page