High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

solid state

Grid  List 

74 Item(s)

per page
  • Z-systems RDP-1

    Z-systems RDP-1

    Z-systems RDP-1 the remote is a little glitchy, Z-Systems rdp-1 digital preamplifier: Digital inputs: 2 AES/EBU, 3 S/PDIF (RCA), 1 optical (TosLink with ST-type glass optional). Digital outputs: 1 AES/EBU, 1 S/PDIF (RCA), 1 optical (TosLink with ST-type glass optional). 24-bit input/output. 32-bit DSP with internal 40-bit floating-point arithmetic, used for all gain and equalization. Dynamic range: >144dB. THD+N: better than -135dB. Number of memories/presets: 99. Gain control: from -95dB to +12dB. Dimensions: 17" W by 4.5" H by 10" D. Weight: 14 Read more at http://www.stereophile.com/content/z-systems-rdp-1-digital-preamplifier-specifications#4xFcik8jfpKPDFKV.99 Learn More
    $950.00

  • YBA 2a alpha version  preamp with phono

    YBA 2a alpha version preamp with phono

    YBA 2a preamplifier mint, with phono and remote control Description: Solid-state, full-function stereo preamplifier with five line inputs, one phono input, and one tape loop. Frequency responses: 5Hz-400kHz, -0.2dB, line; 5Hz-60kHz, -0.2dB, phono. Input sensitivity: 2mV RMS (MM phono); 150mV RMS, line, both for 1V output. Input impedance: 47k ohms, MM phono; 100k ohms line. Output impedance: ±20 ohms. Maximum output: 8V RMS. RIAA overload: 2.2V RMS (frequency not specified). S/N ratio (ref. 1V output at 1kHz): 100dB, line; 90dB, MM phono. Absolute polarity: inverting. Dimensions: preamplifier: 16.9" (430mm) W by 13" (330mm) D by 3" (75mm) H, (MC phono module adds 3" (75mm) to depth). Power Supply: 4.7" (120mm) W by 11.8" (300mm) D (inc. IEC plug) by 3" (75mm) H. Weight: 11 lbs (5kg). Learn More
    $2,000.00

  • Yamaha C65
    $299.00

  • Vincent SA-31 Hybrid

    Vincent SA-31 Hybrid

    Vincent SA-31 Hybrid, bench tested, $1600 retail Learn More
    $800.00

  • Threshold SL10

    Threshold SL10

    Threshold SL10, Nelson Pass vintage preamplifier with separate power supply Active Circuit Data: performance of basic gain stages. (measured to IHF standards A202 for distortion specifications). preliminary phono gain stage: (all measurements made at highest input impedance) FREQUENCY RESPONSE: .3 Hz through 500,000 Hz, +0, -3dB. SQUARE WAVE RISE TIME: .5 microseconds. TOTAL HARMONIC DISTORTION: .015% second harmonic @ 50 millivolts out .. 03% second harmonic @ 100 millivolts out, NOISE: (preliminary phono gain stage + RIAA gain stage): -80dB A weighted referenced to 1 volt out. - 72dB unweighted referenced to 1 volt out. CROSSTALK: (left minus right) > -7OdB @ 1,000 Hz. INPUT OVERLOAD: 70 millivolts peak for any frequency. INPUT IMPEDANCE: selectable 1 through 15 ohms, 15 through 30 ohms, 30 through 50 ohms. RIAA phono gain stage: RIAA EQUALIZATION: no greater than .5dB deviation at frequency extremes. TOTAL HARMONIC DISTORTION: 012%. 20Hz through 20,000 Hz @ 2 volts out. typically: .008% @ 1.000 Hz. SMPTE INTERMODULATION DISTORTION: .006% @ 1 volt out. NOISE: -90dB A weighted referenced to 1 volt out. -75 dB unweighted referenced to 1· volt out. CROSSTALK: (left minus right) -70 dB @ 1.000 Hz. INPUT IMPEDANCE: 47.000 ohm and selectable 100 pI, 200 pf. or 400 pf. INPUT OVERLOAD: 320 millivolt peak @ 1.000 Hz. OUTPUT IMPEDANCE (tape out): 1,000 ohms. GAIN FACTOR: +33dB @ 1,000 Hz. High Level Gain Stage: (performance of the basic gain stage outside the system) FREQUENCY RESPONSE: dc through 500,000 Hz. +0. -3dB. SQUARE WAVE RISE TIME: <.6 microseconds. PROPAGATION DELAY: input to output transit time: <.02 microseconds. PHASE SHIFT: <10 degrees at 1,000,000 Hz. SLEW RATE: 150 volts/microsecond. TOTAL HARMONIC DISTORTION: .003%, 20 Hz through 5,000 Hz .. 006%, 5,000 Hz through 20,000 Hz @ 5 volts out into 10,000 ohm, 1,000 pf load. SMPTE INTERMODULATION DISTORTION: .008%, 10.000 Hz @ 5 volts out into 10,000 ohm, 1,000 pf load. CROSSTALK: left channel to right channel; -6OdB @ 1,000 Hz. tuner to auxiliary; -65dB @ 1,000 Hz. GAIN FACTOR: +2OdB. MAXIMUM OUTPUT BEFORE CLIPPING: ::12 volts peak. Dimensions: Faceplate: 19 inches wide, 2.62 inches high. Chassis: 17 inches wide, 2.215 inches high, 8 inches deep. Power supply: 8 inches wide. 3.375 inches high, 5 inches deep. Learn More
    $1,500.00

  • Threshold NS10

    Threshold NS10

    Threshold NS10 classic Nelson Pass preamplifier, The Threshold NS10 preamplifier represents design concepts and empirical performance that set new boundaries for the classification 'state of the art'. No expense has been spared in it's engineering or construction to assure that it's extraordinary capabilities will remain virtually unchanged under years of the most rigorous usage. The design of the NS10 follows Threshold's philosophy of keeping the signal processing circuitry as simple as possible; only two common emitter transistors are used in the gain stages of each channel. Other components in the circuit are there simply to assure that these two transistors remain at maximum operating linearity substantially beyond the range traversed by the dynamics of the audio signal. By eliminating the non-linearities which result from cascading large numbers of gain devices, particularly as found in operational IC chip modules, the necessity for substantial amounts of negative feedback is eliminated. Specifications Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Gain: 40dB (MM), 20dB (line) Signal to noise ratio: 70dB (MM) Output: 1V (Pre out), 10V (Pre out Max) Dimensions: 19 x 3-1/2 x 9-11/16 inches Weight: 13lbs Learn More
    $2,500.00

  • Threshold FET -10 HL Preamplifier with power supply in black

    Threshold FET -10 HL Preamplifier with power supply in black

    Threshold FET -10 HL Preamplifier with power supply black only tested 3/23 Learn More
    $2,500.00

  • TacT Audio RCS 2.2x Room Correction Preamplifier
    $1,800.00

  • Swiss Physics 6a amplifier and 5 preamplifier package

    Swiss Physics 6a amplifier and 5 preamplifier package

    Swiss Physics 6a amplifier and 5 preamplifier package. This company was founded by the engineers from goldmund rarely available. spectacular sounding Learn More
    $4,900.00

  • SUMO Athena Stereo Preamplifier

    SUMO Athena Stereo Preamplifier

    Specifications Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: 0.115mV (MC), 2.3mV (MM), 315mV (line) Signal to noise ratio: 80dB (MC), 85dB (MM), 100dB (line) Dimensions: 480 x 220 x 40mm Learn More
    $299.95

  • sony ta-e86b

    sony ta-e86b

    sony ta-e86b serviced 6/20 Learn More
    $999.00

  • Sherbourn TL-7000 Processor
    $5,000.00

  • Revox B262 preamplifier

    Revox B262 preamplifier

    Revox B262 preamplifier rare Learn More
    $1,000.00

  • Revox B-252 Preamp

    Revox B-252 Preamp

    Revox B-252 Preamp The ReVox B252 was introduced in 1982 with a production run until 1990 and an original selling price of $1,750.00. It was the dedicated preamplifier of the famed 200 series line of ReVox components that is still very highly regarded today. The B252 looks pretty much identical to the B251 integrated amplifier; it is a direct spin-off of that component sans the amplifier section. This dedicated preamp gave consumers the freedom to choose any amplifier(S) of their liking, and further contributed to the purity of the sound signal. The B252 was way ahead of its time when produced, serving as the perfect model of new technology and time proven circuitry integrated appropriately. The controls on the lower part of the front panel-which include tone, balance, and the recording source selectors-are treated as ancillary and protected from casual use by a clear plastic pop-off cover. The "regular" operating controls, ranged along the top edge of the panel, include a Standby/on switch ,input selectors, tone defeat, a 20-dB output attenuator switch, and volume. TUNER: 160 mV ... 2.3V,: nominally 500 mV/47 kOhms AUX: 160 mV ... 2.3 V, nominally 500mV/47 kOhms C-DISC: 160 mV ... 2.3V, nominally 500mV/47 kOhms TAPE 1: 160 mV ... 2.3 V, nominally 500mV/47 kOhms TAPE 2: 160 mV .,. 2.3 V, nominally 500mV/47 kOhms EXT, FILTER PHONO MC: nominally 700mV/47 kOhms : 100 VV ,.. 1.2 mV, nominally 300 ~V/100 Ohms PHONO MM: 1.6 mV ... 23 mV, nominally 5 mV/47 kOhms/ 68 pF ... 400 pF Outputs Level/Permissible Load TAPE 1: 100 mV ... 1.7 V, nominally 500m~/>10 kOhms TAPE 2: 100 mV ... 1.7 V, nominally 500 mV/>10 kOhms TAPE COPY: nominally 500 mV/>10 kOhms EXT. FILTER: nominally 700mV/>10 kOhms HEADPHONES(2 x): 15V max. (at 100W/4 Ohms), adjustable in 4 steps, f+4,0, -4, -8 Output at Clipping: High Output: 15.2V Low Output: 3.0V Output Impedance: Main: 600 Ohms Tone Controls Bass: 30 Hz/+12 dB ... -12 dB Treble: 15 kHz/+7 dB ... -7 dB Subsonic filter 18 Hz,18 dB/Octave(assignable to each program source) Signal- to-noise ratio, linear: (High level inputs, referred to 500 mV, 10 kOhms termination): 96dB relative to nominal power output 80dB at 50 mW (Phono MM input, referred to 5mV,1 kOhm Termination) 75 dB relative to nominal power output 75dB at 50 mW equivalent noise voltage at the input -124dBV Crosstalk between Inputs (at 10 kHz) 90 dB Channel separation: (at 1 kHz) 94dB Frequency Response 20 Hz ... 20 kHz: +0/-0.2 dB Phono RIAA equalization: (4 times constant) +/-0.3dB Total harmonic distortion: (at 10 kHz) less than 0.01% Rise Time 2 us with 4 0hms load Dimensions 17 3/4" 6" H x 14" D Weight 17lbs Learn More
    $999.00

  • Reference Line Preeminence One Passive Preamplfiier

    Reference Line Preeminence One Passive Preamplfiier

    Reference Line Preeminence One Passive Preamplfiier Learn More
    $600.00

  • PSE Professional Systems Engineering OCM

    PSE Professional Systems Engineering OCM

    An add on for the high end PSE Stereo equipment. The OCM was designed for those people who would like to interface speakers, headphones, and level monitoring equipment into one compact package Learn More
    $999.00

  • PS Audio 7.0 remote

    PS Audio 7.0 remote

    One owner, with remote PREAMPLIFIER..............................................................PS-70 Remote Control Line Stage Preamplifier Frequency Response.................................................20 Hz - 20 kHz +/- 0.1dB Sensitivity (ref. .5V @ 1 kHz) Low Gain.................................................150 mV Normal Gain.............................................90 mV THD/IM.................................................................................................below 0.01% S/N Ratio..........................................................................................................-90dB Inputs...................................................................5 sets of line level coax inputs 1 set of line level XLR inputs 1 set of coax tape inputs Outputs....................................................2 sets of single-ended coax outputs 1 set of balanced XLR outputs 1 set of coax tape outputs Dimensions..........................................................................17"W x 2 1/2"H x 9"D 43cm W x 6cm H x 23cm D AC power Consumption...........................................................................15 Watts Shipping Wt. ..................................................................................................14 lbs. 6.4 k AMPLIFIER Power Output.................................................8 Ohms 200 Watts/ch 4 Ohms 400 Watts/ch THD @ rated output, 8 Ohms less than .2% IM Distortion less than .1% Slew Rate greater than 150 V/microsecond Input Impedance 30k Ohms Overall Negative Feedback 9 dB Dimensions......................................................................17"W x 6"H x 17 5/8"D 43cm W x 15cm H x 45cm D Power Consumption...................................................................................1200W Shipping Weight...........................................................................................62 lbs. Learn More
    $600.00

  • PS audio 5.7 Preamplifier

    PS audio 5.7 Preamplifier

    PS audio 5.7 Preamplifier, original box tested Learn More
    $699.00

  • Parsound JC2B

    Parsound JC2B

    Parsound JC2B excellent with remote and factory box Learn More
    $2,900.00

  • Parasound Zpre2

    Parasound Zpre2

    Two Channel Zone Preamplifier Learn More
    $279.00

  • Nova CP-100A

    Nova CP-100A

    Nova CP-100A rare classic high performing lots of mods, currently only used as a phono stage factory box and all paperwork in 8/22 Learn More
    $999.00

  • Naim NAP62

    Naim NAP62

    Naim NAP62 pre (no power supply) used, excellent Learn More
    $475.00

  • Musical Fidelity A3.2 Dual Mono

    Musical Fidelity A3.2 Dual Mono

    Musical Fidelity A3.2 Dual Mono preamp, $2000 retail owners manual pdf: https://www.musicalfidelity.com/uploads/manuals/English/a32crpre_eng.pdf Learn More
    $800.00

  • Meridian Prime Headphone Amplifier / Prime Power Supply

    Meridian Prime Headphone Amplifier / Prime Power Supply

    Meridian Prime Headphone Amplifier / Prime Power Supply Silver AUDIO INPUTS 1x pair Phono (stereo) (A1). Gain 3dB; 1.4Vrms in for 2Vrms out 1x 3.5mm analogue stereo (A2). Gain 12dB; 500mVrms in for 2Vrms out. Analogue inputs overload capability >40dB 1x Asynchronous USB 2.0 interface, 44.1–192kHz ≤24-bit. Jitter <90ps p-p. Apodising filter and upsampling of 44.1/48kHz inputs to 88.2/96kHz MQA decode and render AUDIO OUTPUTS 1x pair phono (stereo) preamp out. Maximum output 3.1Vrms @ 1kHz, THD <0.001% @ 1kHz up to 3V rms. Crosstalk <–70dB @ 1kHz. Output can be disabled via power button 2x 1/4in A-type stereo phone jacks. Maximum output 3Vrms off load, THD <0.002%. Output impedance <100mΩ. Power output 250mW up to 42Ω. Short-circuit protected 1x 3.5mm stereo phone jack. Max output 3Vrms off-load, THD <0.002%. Output impedance 2.2Ω PERFORMANCE Output noise (input A1) < –100dBV CCIR or A weighted Frequency response +0/–1dB DC–70kHz, +0/–3dB DC–200kHz COMPATIBILITY Suitable for impedances in the range 16–1kΩ or more. Suitable for open, closed, in-, on- or over-ear models. Recommended sensitivity >80dBspl/mW or >96dBspl/V CONTROLS Volume with precise tracking, 70dB range Input switch Processing (off/i/ii) Power including rear output mute DIMENSIONS / WEIGHT HEIGHT: 50mm [2.0in] WIDTH: 160mm [6.3in] DEPTH: 150mm [5.9in] WEIGHT: 0.9 kg (2.0 lbs) POWER 12V DC Consumption <0.5W standby <1W in quiescent Learn More
    $1,595.00

  • Meridian Media Source 600 Sooloos Endpoint

    Meridian Media Source 600 Sooloos Endpoint

    Meridian Media Source 600 Sooloos Endpoint Learn More
    $700.00

  • Mcintosh wood panlock cases inquire

    Mcintosh wood panlock cases inquire

    We have Mcintosh panlock wood cases. .. Let us know what your'e looking for Learn More
    $300.00

  • Mcintosh MX115

    Mcintosh MX115

    Mcintosh MX115 serviced, excellent Learn More
    $1,500.00

  • Mcintosh MX112

    Mcintosh MX112

    Mcintosh MX112 with new box/packing in 3/23 Learn More
    $1,500.00

  • Mcintosh MX 130 A/V Tuner preamp processor

    Mcintosh MX 130 A/V Tuner preamp processor

    Mcintosh MX 130 A/V Tuner preamp processor, excellent Learn More
    $1,500.00

  • Mcintosh CR12 Audio Video Multizone Control System

    Mcintosh CR12 Audio Video Multizone Control System

    Mcintosh CR12 Audio Video Multizone Control System 2 available price for each Learn More
    $449.00

  • Mcintosh C34V

    Mcintosh C34V

    Mcintosh C34V beautiful condition one owner since new Learn More
    $1,999.00

  • Mcintosh C28

    Mcintosh C28

    Mcintosh C28 We are currently repairing this 2/24 Learn More
    $1,200.00

  • Mcintosh C26 (2 available)

    Mcintosh C26 (2 available)

    Mcintosh C26 (2 available) The McIntosh C26 is a glass fronted pre-amplifier featuring two phono, one tuner and one auxiliary input, and two tape loops. Specifications Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Gain: 62dB (MM), 20dB (line) Input sensitivity: 2mV (MM), 250mV (line) Signal to noise ratio: 74dB (MM), 85dB (line) Output: 250mV (line), 2.5V (Pre out) Semiconductors: 18 x transistors, 3 x diodes Dimensions: 406.4 x 138.1 x 330mm Weight: 14.97kg Finish: anodized gold and black Learn More
    $1,300.00

  • MBL 4006 remote preamplifier
    $2,999.00

  • Mark Levinson No.38 two available

    Mark Levinson No.38 two available

    Mark Levinson No.38 excellent condition with remote. As of 12/23 we have two available the second is not as pretty for $2500 pics with white background Learn More
    $2,650.00

  • Mark Levinson No 526   NEW in the box, unopened

    Mark Levinson No 526 NEW in the box, unopened

    Mark Levinson No 526 NEW in the box, never opened $20000 retail with phono the one in the picture is another unit I used to have, this listing posted 2/2023 if for a sealed in the box unit that someone purchased and has not used. You may phone (888)850-4366 Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path 32-bit Precision Link DAC with three selectable filters and seven power supplies Supports high-resolution PCM (up to 32-bit, 192kHz) and DSD (up to 5.6MHz) Discrete, balanced R-2R Ladder volume control for precision and performance Class-A Main Drive Headphone output for up to 32-ohm headphones using main circuit Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers Class-A Pure Phono stage with physically separated channels for MC and MM 12 analog, digital, and phono inputs; balanced, single-ended, and headphone outputs Designed and handcrafted in the US Learn More
    $13,999.00

  • Mark Levinson No 26

    Mark Levinson No 26

    Mark Levinson No 26 with power supply and connecting cable in 3/22 pics soon nice condition We can voltage convert if needed for international users Learn More
    $3,200.00

  • Mark Levinson ML7a

    Mark Levinson ML7a

    Mark Levinson ML7a in 3/23 Learn More
    $3,999.00

  • Mark Levinson ML380

    Mark Levinson ML380

    Mark Levinson ML380 with remote Learn More
    $2,575.00

  • Mark Levinson 380s

    Mark Levinson 380s

    Mark Levinson 380s with remote in 5/23 pics soon one owner, checked by factory service center recently (with rest other ML pieces) Learn More
    $3,400.00

  • Mark Levinson 32 preamp

    Mark Levinson 32 preamp

    Mark Levinson 32 preamp available to ship 10/23 will be provided with a learning remote or aftermarket remote Learn More
    $8,800.00

  • Marantz AV7005 AV Control Center

    Marantz AV7005 AV Control Center

    Marantz AV-7005 Av control center used in very nice condition with remote and cord The Preamp/Processor Advantage Delegating the amplification duties to a separate component allows the AV7005 to keep a healthy distance between noise-inducing high voltage/high current circuits and sensitive low-level circuits. This means that the radio frequency and electromagnetic interferences that must be tamed in a receiver simply don't exist in a pre/pro, or are reduced by several orders of magnitude. The result is less distortion and less signal degradation in general. Elegant Design Aesthetically, the AV7005 is a sophisticated – and totally successful – exercise in minimalist design. At first glance, you'll see just two knobs, the iconic Marantz porthole-style display, and a smaller On/Standby button. Naturally, this elegantly simple front panel integrates with any décor. But don't mistake the AV7005's true personality. Look closely at the centered display first used on the Marantz Model 9 power amplifier. It provides an "at a glance" status check on input selection and gain setting. Immediately under this display, a drop-down door hides a vacuum fluorescent display, as well as secondary controls and connectors. Expansive Yet Compact Barely 16" deep from front panel controls to rear panel connectors, the AV7005 fits where other preamp/processors often can't – on a shelf or in a custom cabinet, and can be rack mounted using the optional rack mount kit RMK8003AV. Audio quality The AV7005's audio circuitry includes our proprietary HDAM (Hyper-Dynamic Amplifier Module) circuits and Current Feedback topology. Even vinyl aficionados will welcome the AV7005 as it includes a highly musical MM phono input implemented with the same current feedback technology that provides seamless octave-to-octave tonal balance for line-level inputs. HDAM HDAMs combine the short signal path advantages of ICs (integrated circuits) and opamps (operational amplifiers) with the superior sound quality of separate circuit components. Because HDAMs are discrete designs, Marantz engineers are free to choose the parts best able to preserve the sonic details of your favorite sources. Current Feedback Current feedback circuits usually exhibit faster rise and fall times and higher slew rates than their voltage feedback cousins. (Think of rise and fall times as an automobile's acceleration and braking capabilities respectively. Slew rate is analogous to a car's cornering ability.) As a consequence, current feedback designs track rapid sonic changes more accurately and thus sound more natural. M-DAX – Makes you iPod and MP3 Files Sound Better Marantz's M-DAX 2, an updated and refined version of the original Marantz Dynamic Audio eXpander, calculates just the amount of high frequency information typical file compression formats remove – and then restores it so you enjoy full fidelity when playing back MP3 or WMA music files. Connectivity The AV7005 makes your home entertainment world far, far larger than you imagined. In addition to conventional sources such as Blu-ray players and set-top cable/satellite boxes, the AV7005 preamp/processor gives you easy ways to listen to the music you've already stored on an iPhone or other portable music player, show your photos on the big screen, stream audio from a wide variety of sources, and enjoy music from your Bluetooth-enabled devices wirelessly with the optional RX101 module. DLNA The AV7005's Ethernet connection is DLNA (Digital Living Network Alliance) 1.5 and Windows 7 compliant. This means it's easier for you access and enjoy digital music from your PC. Streaming Media Access the world of Internet streamed media through various user interfaces and software. Choose from 1000s of Internet radio stations with vTuner. Listen to your favorite music through Rhapsody, Napster, and Pandora. Share photos with Flickr. In other words, connect! Bluetooth Wireless Audio (with optional RX101) Enjoy the world of wireless audio the AV7005. Just plug the optional RX101 Bluetooth module into the AV7005's rear panel M-XPort connector and enjoy traditional Marantz sound quality from your favorite Bluetooth-capable sources such as iPod, iPad and smart-phones. Surround Sound Processing The AV7005 handles all of today's most advanced surround sound formats. You'll find a full roster of Dolby technologies such as TrueHD, Digital Plus, Pro Logic IIz, IIx, II, Virtual Speaker, and Dolby Headphone. From dts, we've included HD Master Audio, High Resolution Audio, ES Discete6.1, Matrix6.1, Neo:6, 96/24, Express, and Neural Surround. Regardless of the audio format chosen by a content provider, the AV7005 will handle it. Audyssey In addition to these surround formats, you'll also find Audyssey's MultEQ XT Auto Calibration, MultEQ Pro for custom installations, Audyssey DSX, Dynamic Volume, and Dynamic EQ. You can use the full array of Audyssey technologies to tame your room's acoustic anomalies, preserve a source's full dynamic impact even at low volumes, and compensate for those "too loud" commercials that often intrude on your listening and viewing pleasure. The Audio/Video Connection Standard HDMI (High Definition Multimedia Interface) has become the de facto standard for connecting components in today's best home entertainment systems. The AV7005 fully supports the latest 1.4a version with six inputs (one on the front panel) and two outputs. You'll enjoy the convenience of single-cable connections, the latest 3D technology, an Audio Return Channel, and Standby Pass-Through. In addition, HDMI 1.4a supports a host of other performance enhancements. Video Features Anchor Bay 10-bit Video Processor/Scaler The ABT2015 10-bit processor, Anchor Bay's fourth-generation video engine, provides exceptional performance including transcoding, deinterlacing, and scaling to give you the flexibility and convenience once restricted to video professionals. Thanks to this processing power, you can now connect all your video sources, even legacy formats such as videotapes, and display their outputs via HDMI on your high definition TV. User Interface New color GUI/On-Screen Display Easy selection. Easy customization. Easy operation. Those are the benefits of the AV7005's new color GUI (Graphical User Interface)/On-Screen Display. Simplified yet comprehensive menu screens, liberal use of color, and consistent navigation commands make it easy to choose the performance parameters you want and integrate the AV7005 with the rest of your system. Enjoy Your Favorite Music in More than One Room For multi-zone operation, you can select different audio sources for Zones 2 and 3, even add a different composite or component video source for Zone 2. There are configurable 7.1 preamp outputs – both single-ended and balanced – as well as a second subwoofer output particularly useful in large rooms. Tuner Features With 56 AM/FM/HD tuner presets (eight stations in each of seven groups) you can memorize your favorite broadcasts, even those from the Internet, for easy and repeatable access. The AV7005's HD Radio allows you to access FM that sounds (almost) as good as CD and AM that often outperforms conventional FM. Ready for satellite radio? So is the AV7005. Simply add a Sirius home docking station (and a subscription) for a wide variety of exclusive programming. In Conclusion The AV7005 delivers state of the art level of performance and flexibility that has distinguished Marantz products for more than 50 years. Technology and tradition. These are Marantz trademarks and your assurance that the AV7005 will truly enlarge your world. Learn More
    $550.00

  • Marantz AV Pre Tuner AV8801

    Marantz AV Pre Tuner AV8801

    Marantz AV Pre Tuner AV8801 Design: 11.2 A/V Processor Codecs: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Pro Logic IIz, DTS, DTS-ES (Discrete, Matrix), DTS 96/24, DTS-HD Master Audio, DTS-HD High Resolution Audio Audyssey: MultEQ XT32, Sub EQ HT, Dynamic EQ, Dynamic Volume, DSX, LFC DACs: Texas Instruments PCM1795 32-Bit/192kHz DSP: Analog Devices ADSP21487 4-Zone Operation AM/FM/HD Radio Tuner Video Connections: HDMI 1.4a (6 Rear In, 1 Front In, 3 Out), Component (3 In, 2 Out), Composite (4 In, 3 Out), No S-Video Audio Connections: Stereo Inputs (7 RCA In, 1 XLR In, 3 Out), Optical (2 In), Coaxial Digital (2 In), 7.1 Multi-channel (1 In), Pre-amp out (11.2 RCA and XLR), USB (1 Front) Other Connections: Ethernet (Internet Radio, DLNA, Streaming and Firmware), 12V triggers (2), RS-232, IR (1 In), 2nd Zone (Composite Video, Component Video, Stereo Audio), 3rd Zone (Stereo Audio), 4th Zone (HDMI), Headphone Jack (6.3mm), AirPlay Dimensions: 7.28″ H x 17.32″ W x 15.33″ D Weight: 30.6 Pounds Learn More
    $1,100.00

  • Marantz 7t

    Marantz 7t

    Marantz 7t in 5/22 we must run this through the service dept first Learn More
    $1,500.00

  • Linn Kairn

    Linn Kairn

    Linn Kairn with moving coil and moving magnet input, works perfectly Learn More
    $699.00

  • Krell Phantom III silver

    Krell Phantom III silver

    Krell Phantom III 3 silver with remote, demo, full warranty, never sold , authorized dealers Phantom III Inputs 2 pr. balanced via XLR connectors 3 pr. single-ended via RCA connectors Main Outputs 1 pr. balanced via XLR connector 1 pr. single-ended via RCA connector Headphone Output 1 via 3-conductor 6.35 mm (1.14 inch) Control Inputs 1 RS-232 input via a 9-pin D-subminiature connector 1 remote IR detector input via a 3-conductor 3.5 mm connector 1 12 VDC trigger input via 3.5 mm connector Control Outputs 2 individually programmable 12 VDC trigger outputs via 3.5 mm connectors Input Impedance Balanced: 40 k Ohms Single-ended: 20 k Ohms Output Impedance Balanced: 310 Ohms Single-ended: 155 Ohms Headphone <3.0 Ohms Gain Balanced 12 dB Single-ended 6 dB Headphone 5.1 dB with 32 Ohm load Volume Control Current-mode, 12-bit, discrete R-2R ladder Input Overload >7.0 V RMS balanced or single-ended Output Overload Balanced: >16 V RMS Single-ended: >8 V RMS Headphone: >3.0 V RMS, 32 Ohm load Frequency Response 20 Hz to 20 kHz +/- 0.02 dB 0.25 Hz to 1.2 kHz +0, -3 dB Total Harmonic Distortion Plus Noise Balanced Output: <0.003%, 20 Hz to 20 kHz, 4 V RMS or 4 v RMS Signal to Noise Ratio >100 dB Wide band, unweighted >100 dB "A" weighted, both referred to 4 v RMS balanced Power Consumption Standby: <2 W Power on: 40 W Dimensions 17.25 in.W x 3.8 in. H x 18.25 in. D 43.82 cm W x 9.65 cm H x 46.36 cm D Weight Shipped: 38 lbs., 17.2 kg Preamplifier only: 23 lbs., 10.4 kg Learn More
    $3,650.00

  • Krell PAM-3

    Krell PAM-3

    Krell PAM-3 Stereo Pre Amplifier Missing Power Supplies Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.01% Signal to noise ratio: 95dB (MM), 100dB (line) Dimensions: 483 x 67 x 342mm Weight: 4.4kg Accessories: external power supply Year: 1984 Learn More
    $900.00

  • Krell KSP7B

    Krell KSP7B

    Krell KSP7B inquire before buying we may or may not have located the power supply for this. Learn More
    $1,500.00

  • Krell KRS-1a

    Krell KRS-1a

    Krell KRS-1a former top of the line four chassis preamplifier. In 12/8/19 , Learn More
    $4,700.00

  • Krell KRC3 (two krc-3 available)

    Krell KRC3 (two krc-3 available)

    Krell KRC3 nice condition with remote, a second that has been recapped (all the larger ones) is in also for $1700 Learn More
    $1,399.00

  • Krell KRC sold

    Krell KRC sold

    Krell KRC freshly recapped 12/23 Learn More
    $3,400.00

  • Krell KRC HR

    Krell KRC HR

    Krell KRC HR freshly recapped 11/23 with remote Learn More
    $3,650.00

  • Krell KPS25SC $22500 retail cd player/preamp

    Krell KPS25SC $22500 retail cd player/preamp

    Krell KPS25SC , We have three in our service department as of 10/23 These will all be recapped, and modified for better long term reliability. With original wood crate. We will modify this listiing as things develop. We had four of these, two are remaining not ready to ship. Learn More
    $6,700.00

  • Krell KCT Preamplifier

    Krell KCT Preamplifier

    Frequency response: 0.4Hz to 220kHz Total harmonic distortion: 0.005% Gain: 6dB (line) Signal to noise ratio: 109dB (line) Dimensions: 470 x 115 x 370mm Weight: 9kg Accessories: remote control Learn More
    $4,500.00

  • Krell KBL with internal phono board  recapped 9/23

    Krell KBL with internal phono board recapped 9/23

    Krell KBL with internal phono board recapped 9/23 inquire before purchasing if available Learn More
    $2,800.00

  • Krell KAV-280p remote preamp
    $1,100.00

  • Krell Illusion II Preamp and DAC

    Krell Illusion II Preamp and DAC

    Krell Illusion II, like new condition, complete with box and all accessories retail 1/22 is $9400 Analog Inputs 2 pr. balanced via XLR connectors 3 pr. singleended via RCA connectors Digital Inputs 1 AES/EBU via XLR connector 2 coaxial via RCA connectors 2 optical via Toslink connectors Main outputs 1 balanced via XLR connectors 1 pr. single]ended via RCA connectors Download the "Quick Set-up Guide" Headphone output 1 via 3-conductor 6.35 mm (1/4 inch) connector Control inputs 1 RS-232 input via a 9-pin D-subminiature connector 1 remote IR detector input via a 3-conductor 3.5 mm connector 1 12 VDC trigger input via 2-conductor 3.5 mm connector Control outputs 2 individually programmable 12 VDC trigger outputs via 2-conductor 3.5mm connectors (30 mA maximum per output) Learn More
    $4,900.00

  • Krell (all models)

    Krell (all models)

    We are authorized dealers for all Krell products. Please inquire about any product. Learn More
    $999,999.99

  • Krell  DSN-1 digital input switcher

    Krell DSN-1 digital input switcher

    Krell DSN-1 digital input switcher, with original box/packing.... Learn More
    $999.00

  • Forte Audio  F45 Line Level Preamplifier

    Forte Audio F45 Line Level Preamplifier

    Forte Audio F45 Line Level Preamplifier Learn More
    $425.00

  • Exogal Comet

    Exogal Comet

    Exogal Comet like new, reviews: http://www.tonepublications.com/review/exogals-comet-plus-dac/ http://www.theabsolutesound.com/articles/exogal-comet-digital-to-analog-converter https://www.audio-activity.com/exogal-comet-plus-en.html Learn More
    $1,300.00

  • Emotiva  XMC-2 Home Theater Processor

    Emotiva XMC-2 Home Theater Processor

    XMC-2 16 Channel 9.1.6 Discrete Dolby Atmos & DTS:X Cinema Processor Excellent Condition Color: Black Original Box, Remote and Accessories The XMC-2 delivers the level of audio performance and features you would expect from separate high-end audiophile components, combined with precise bit-perfect video switching of the latest HDR and Dolby Vision 4k UHD video content, and plenty of channels to support the latest object-oriented home theater surround sound formats (including Dolby Atmos up to 9.1.6 and DTS:X up to 7.1.4). The XMC-2 offers the full range of audio options, from native playback of DSD audio, to pure analog playback in our audiophile Reference Stereo mode, to full decoding of the latest object oriented sound tracks. With the XMC-2 you really can have it all….. without compromise. When used as a fully featured home theater processor, the XMC-2 starts by decoding the audio from your movie soundtracks and surround sound discs with the best possible sound quality. Sophisticated bass management directs the low-frequency components of the audio spectrum to your subwoofer. This finely tuned digital audio is then converted into high-quality analog audio by precision DACs and sent to your amplifiers - via a high-quality analog ladder network volume control and audiophile grade analog circuitry. If you listen to high-resolution audio downloads or other high-quality music sources which don't require all of that advanced processing, the XMC-2 offers several purist audiophile modes. High-quality digital sources, both PCM and DSD, can be converted directly to analog by the precision high-performance DACs, bypassing all of the more advanced processing. And, if you have analog sources which don't require any processing at all, they can be routed directly to the superb quality fully balanced analog signal path, bypassing all digital processing.  SUPPORT FOR THE LATEST AUDIO AND VIDEO FORMATS Home theater video is continually evolving to deliver a sharper picture, more colors, and more advanced features - which can make it difficult to keep track of what you actually need to take advantage of the latest video content and this year's 4k displays. The XMC-2 has eight HDMI video inputs and two HDMI video outputs, all of which support HDMI 2.0b and HDCP 2.2. The XMC-2 supports the full HDMI 2.0b 18 gBps video data rate, so it supports full 4k UHD video, at frame rates up to 4k/60, with full 12-bit color, and 4.4.4 chroma subsampling. It also supports static and dynamic HDR, including Dolby Vision, for a brilliant picture, with pure, intense colors, and remarkable contrast. The XMC-2 provides everything you need to get the most from the latest streaming content and 4k UHD Blu-Ray discs. The XMC-2 supports Dolby Atmos and DTS:X, the latest object oriented surround sound formats, and Dolby TrueHD and DTS Master Audio, the current high-quality regular surround sound formats. Of course, the XMC-2 also provides full support for all the usual analog and digital audio formats, including PCM and DSD digital audio, vie both HDMI and USB. Learn More
    $1,995.00

  • Dynaco Stereo 120 (3) and PAT 4 preamp

    Dynaco Stereo 120 (3) and PAT 4 preamp

    You can purchase each item individually. We have one 120 that we just replaced the coupling caps and resoldered the board as needed. That's $250 Inquire The Dynaco Stereo 120 is an all silicon transistor basic power amplifier for use with separate preamplifiers such as the Dynaco PAT-4 or PAT-5, or for use with tape recorders or tuners such as the FM-5 or AF-6, which have their own volume controls. The unit contains two 60 watt amplifiers on one chassis with a common power supply. Although the Stereo 120 is a solid state device, containing transistors and similar semiconductors, it has been designed to be used under normal conditions without special safety precautions, just as if it were a high grade tube amplifier. Thus it can be connected to source and speaker components and used with confidence in all conventional arrangements. There are no circuit breakers, speaker fuses, or other resettable devices to impede the use of the Stereo 120 under any reasonable conditions of use or abuse. This is achieved by using novel circuits (on which patents are pending) which automatically and instantly protect the amplifier. Specifications Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.5% Damping factor: 40 Input sensitivity: 1.5V Signal to noise ratio: 95dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 15 x transistors, 15 x diodes Dimensions: 13 x 10.5 x 4 inches Weight: 20lbs Learn More
    $770.00

  • Denon DAP-5500

    Denon DAP-5500

    Denon DAP-5500 original box/packing one owner, excellent, bench tested Learn More
    $750.00

  • Counterpoint Solid 8
    $599.00

  • Classe DR-5L
    $950.00

  • Cello Palette Preamplifier
    $8,500.00

  • Carver CT-Seven Sonic Holography Tuner Preamplifier

    Carver CT-Seven Sonic Holography Tuner Preamplifier

    Carver CT-Seven Sonic Holography Tuner Preamplifier Black Very Good Condition Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.5% Signal to noise ratio: 90dB (MM), 90dB (line) Output: 7V (Pre out Max) Dimensions: 484 x 89 x 308mm Weight: 5.1kg Learn More
    $375.00

  • Cambridge Azure 840 E

    Cambridge Azure 840 E

    Cambridge Azure 840 E Very nice condition, original box/packing/remote Azur 840E Pre-amplifier The 840E is a high-end pre-amplifier which uses Cambridge Audio’s new proprietary Terrapin™ modules for unprecedented audio fidelity forming the perfect partner for the accompanying 840W power amplifier. A customisable front panel display means tone controls can be selected and stored by nameable input. Volume, input and tone are also all controlled by highly sophisticated relay driven circuits. Rather than use common op-amps for the critical low level gain stages of the 840E (and 840W) Cambridge Audio instead decided to design its own audiophile amplifier modules. The subject of a separate research and development project these unique modules have been designed with single minded dedication to the very best audio performance possible. Two types exist, the TPA amplifier and TPB buffer module fully optimised for their respective roles. Nicknamed the Terrapins (because of their 10 pins) they add yet another dimension to Cambridge Audio’s commitment to audio excellence. A sophisticated resistor ladder and relay based attenuator for volume (1dB steps) and balance controls allows remarkably accurate volume control with channel balance. Each channel has its own relays and ladder for superb stereo separation and imaging. This kind of feature is normally the preserve of exotic high-end equipment and is relatively unheard of at this price point As the pre-amp has its own power supply, it operates in complete isolation to the power amplifier and does not suffer from any interference, something which is also aided by two balanced inputs. The 840E features an extremely attractive and user friendly front panel display which is customisable to show which input is selected. The Azur 840E makes room for eight inputs, two of which have both fully balanced (XLR) and unbalanced connections, ideal for use with the Azur 840C upsampling CD player. These inputs can be named as desired by the user on the custom-designed display to show CD, MP3, Phono etc. Completing the rear panel is an RS232 control port, and multi-room outputs to connect the 840E to custom installations. This plethora of connections enables complete integration with multi-room entertainment systems including two way interface with touchscreen control panels. Alternatively, the 840E is Incognito Ready™. This means that two additional rooms can access the source components connected to the 840E via Cambridge Audio’s Incognito system amplified keypads and passive speakers or active in-ceiling speakers. An independent Incognito power supply links to the 840E, enabling audio and low voltage power to be transmitted to each Incognito keypad using only one run of CAT5 cable. As with all Azur products, the foundation of the 840E’s excellence is a bespoke chassis. This comprises an incredibly thick 7mm front panel and extruded side panels, both fashioned from aluminium, which combine with a 2mm formed steel base plate and specially designed vibration absorbing feet. The result is an ultra rigid, low resonance, acoustically dampened platform for the electronics to sit in. The 840E is available in silver and comes complete with the latest elegant, slim-line navigator style Azur remote handset offering full control of Azur CD players, Incognito keypads and discrete commands for custom install use. As an additional facet, all Cambridge Audio remotes feature iPod™ Command – which means that basic iPod controls such as volume and track select can be controlled from the comfort of the user’s sofa. This boon requires the use of an Apple or other universal dock. file:///C:/Users/steven/Downloads/Azur%20840E%20User%20Manual%20-%20English%20(1).pdf Learn More
    $799.00

  • Audio Research LS2B

    Audio Research LS2B

    Audio Research LS2B received from original customer has been serviced in recent years by someone else. I don't know what they did. In black Learn More
    $1,899.00

  • Anthem AVM 30 Pre/Pro in Silver

    Anthem AVM 30 Pre/Pro in Silver

    Anthem AVM 30 Pre/Pro in Silver Processing Modes: Dolby: Digital 5.1, EX, Pro Logic IIx DTS: DTS, ES, 96/24, Neo:6 Other: THX Ultra2, AnthemLogic THX Certification: Yes Audio D/A Converter: 24-bit/192-kilohertz Frequency Response: –0.2 dB from 10 Hz to 20 kHz Dimensions (H x W x D, inches): 5.9 x 17.25 x 14.25 Weight (pounds): 28 Inputs: Video: component video (4), S-video (7), composite video (7) Audio: balanced analog stereo (1), AES/EBU digital (1), coaxial digital (7), optical digital (3), 5.1-channel analog (1), stereo analog (7) Outputs: Video: component video (2), S-video (5), composite video (5) Audio: balanced analog (10), single- ended analog (10), coaxial digital (2), stereo analog (4) Additional: RS-232 (1), 12-volt trigger (3), IR receiver (3), IR emitter (2), headphone (1) Learn More
    $1,000.00

  • Anthem AVM 20 Audio Video Preamplifier

    Anthem AVM 20 Audio Video Preamplifier

    Anthem AVM 20 Audio Video Preamplifier Black Frequency response: 10Hz to 20kHz Total harmonic distortion: 0.003% Signal to noise ratio: 107dB (line) Channel separation: 82dB (line) Output: 2V (Pre out), 6.3V (Pre out Max) Digital inputs: coaxial, optical, AES Video Connections: component, composite, SVHS Dimensions: 149 x 438 x 362mm Weight: 12.2kg Learn More
    $599.95

  • ADCOM SLC-505 Straight Line Controller Passive Preamplifier
    $150.00

  • Adcom GTP-500 II

    Adcom GTP-500 II

    Adcom GTP-500 II check availablility before purchasing Learn More
    $245.00

Grid  List 

74 Item(s)

per page