High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

Speakers

Grid  List 

123 Item(s)

per page
  • sonus faber solo center channel
    $580.00

  • Definitive Mythos 7 Center Channel

    Definitive Mythos 7 Center Channel

    Definitive Mythos 7 Center channel In aluminum, excellent condition, with box/packing The perfect center channel speaker solution for flat panel TVs Two high-definition 3-1/2 inch drivers pressure-coupled to Two 3-1/2 inch planar Low-Bass Radiators Hand-polished gloss aircraft-grade extruded aluminum enclosure with proprietary damping technologies to ensure total rigidity and perfectly accurate sound 1 inch Pure Aluminum dome tweeter with an acoustically contoured faceplate for unequaled high frequency extension, detail and smoothness Legendary Mythos® Performance for Flat Panel TVs Nothing complements your new high definition flat screen television with more style, versatility and sheer performance than the beautiful Mythos Series models. The Mythos Seven is a table/shelf-mount and on-wall center channel speaker in the critically acclaimed Mythos line of high performance loudspeakers. The Mythos Seven come with easy-to-install mounting hardware that allows it to mount on the wall above or below your television. Also included is hardware that allows you to place the speaker on the TV or on a shelf or table top. Mythos Seven is the perfect match center speaker for the Mythos Six main speakers for a truly exceptional home theater audio system. Superior Performance Components Each Mythos Seven contains a D'Appolito array consisting of two high-definition 3-1/2 inch drivers housed in a air-tight enclosure. The drivers feature die cast Aluminum baskets, mono-polymer cones and Finite Element Analysis optimized magnet structures for clear low distortion life-like sound. The drivers are pressure-coupled to two 3-1/2 inch planar Low-Bass Radiators for exceptional bass extension not normally found in slim on-wall loudspeakers of this size. The bass roll-off of the Mythos Seven is smooth and controlled, allowing it to seamlessly blend with a powered subwoofer, such as Definitive's SuperCubes, for audiophile-grade home theater power and precision. A 1 inch Pure Aluminum dome tweeter produces extended highs that reveal nuance and shimmer without a trace of edginess. Learn More
    $280.00

  • Velodyne Direct Digital 15 THX

    Velodyne Direct Digital 15 THX

    Velodyne DD15 THX Ultra2 Certified Patented ERS 'Class D' power amplifier, 1250 watt RMS / 3000 watt Dynamic Remote control with six custom presets, night mode Driver: 15" forward firing Kevlar-reinforced resin (12.7" piston diameter) Frequency response: 15 Hz - 120 Hz +/- 3 dB Learn More
    $1,500.00

  • Meridian DSP5000C

    Meridian DSP5000C

    Meridian's active center channel Learn More
    $599.00

  • Rel Q201e
    $650.00

  • Cabasse Farella 402
    $1,400.00

  • Nakamichi Soundspace 10

    Nakamichi Soundspace 10

    2 subs, 5 speakers remote http://www.nkmca.com/soundspace/SS10/SS10spec.htm Learn More
    $1,200.00

  • Velodyne va1012x subwoofer

    Velodyne va1012x subwoofer

    VA-l012X Cabinet (inc. legs) 14.75" (w) 17.15" (w) 15.50" (h) 18.05" (h) 14.68" (d) 17.18"(d) Hi Pass Crossover 85 Hz (fixed) 85 Hz (fixed) 6 db per octave 6 db per octave Low Pass Crossover 6 db per octave 6 db per octave 24 db ultimate 24 db ultimate Amplifier Class AlB Class AlB 65 watts RMS 80 watts RMS 200 watts peak 240 watts peak Frequency Response 35-85 Hz 28-85 Hz Woofer 8 inches 10 inches Forward firing Forward firing Magnet 53 ounces 55 ounces Voice Coil 2" 2" Pass ive Radiator 10" 12" Down firing Down firing Inputs Line level Line level Speaker level Speaker level Outputs Line level Line level Speaker level . Speaker level Warranty One year One year (parts & labor) (parts & labor) Weight 44 Ibs. (approx.) 58 Ibs. (approx.) Learn More
    $150.00

  • Velodyne ULD 15

    Velodyne ULD 15

    Just the sub Velodyne ULD-15 subwoofer system. Similar system using 15" cone, 5/8" linear travel. Frequency response: 18Hz–85Hz, ±3dB, 104dB at 20Hz with less than 1% THD. Cabinet dimensions: 17" W by 22.5" L by 18.25" H, 2.59 cubic feet. Weight: 57 lbs. Learn More
    $375.00

  • Cello Coronet Speakers (5 pieces)

    Cello Coronet Speakers (5 pieces)

    Ultra Rare, 5 speakers (only 20 ever made) Learn More
    $6,000.00

  • Infinity  HS1000 15" subwoofer

    Infinity HS1000 15" subwoofer

    a little wear, no box Florida pick up Learn More
    $340.00

  • Acoustat 2+2

    Acoustat 2+2

    Acoustat 2+2 full range 7'10" electrostatics PLUS TRUCKING AND PACKING CHARGES UNLESS PICKED UP. PLEASE INQUIRE Learn More
    $999.00

  • Wilson Audio Sophia 3

    Wilson Audio Sophia 3

    Wilson Audio Sophia 3 in blue Drivers Tweeter Size1 inch (2.54 cm) Enclosure TypeInverted Titanium Dome Midrange Size7 inch (17.78 cm) Enclosure TypeCellulose/Paper Pulp Woofers Sizes 10 inch (25.40 cm) Enclosure TypeAluminum Cone Measurements Nominal Impedance4 ohms, 3.1 ohms minimum @ 98 Hz Sensitivity87 dB @ 1 watt @ one meter @ 1 kHz Frequency Response+/-3 dB 20 Hz - 22.5 kHz Room Average Response Minimum Amplified Power25 watts per channel Dimensions Height41 5/32 inches (104.45 cm) w/o spikes Width13 5/8 inches (34.61 cm) Depth18 15/16 inches (48.12 cm) Product Weight Approximate Weight System Weight / Channel165 lbs (74.84 kg) Total Shipping Weight485 lbs (219.99 kg) Learn More
    $9,900.00

  • DYNAUDIO CUSTOM SPEAKERS

    DYNAUDIO CUSTOM SPEAKERS

    CUSTOM MADE BOOKSHELF SPEAKERS HIGH CABINET SOLIDITY AND DYNAUDIO DRIVERS Learn More
    $500.00

  • AMPHION ORIGO CENTER CHANNEL

    AMPHION ORIGO CENTER CHANNEL

    AS NEW Type: 2 way, 2 driver loudspeaker system Frequency Response: 45Hz to 20kHz Recommended Amplifier: 20 to 200W Crossover Frequency: 1200Hz Impedance: 8Ω Sensitivity: 85dB Bass: 1 x 6-1/2" aluminium cone Tweeter: 1 x 1" aluminium dome Enclosure: bass reflex Dimensions: 190 x 290 x 380mm Weight: 10kg Learn More
    $600.00

  • Polk Audio Center Channel Speaker
    $400.00

  • JM Lab Center Channel Speaker
    $400.00

  • Krell Master Reference Subwoofer

    Krell Master Reference Subwoofer

    Krell Master Reference Subwoofer.. These retailed for $40,000. The Master Reference Subwoofer (MRS) is all Krell, hugely powerful, all aluminum, and as heavy as a boulder. Capable of a manufacturer-rated 120dB at 20Hz, the MRS has enough output for huge spaces. The MRS has a 2600W amplifier based on the Krell FPB-750 that powers the two 15" drivers (each capable of 3" excursion), while the cabinet is constructed from 1" aluminum side panels and 2" baffles. The crossover electronics are even housed in their own metal case for isolation from the woofers. Original retail price: $28,000-$40,000. Shipping weight: 480 lbs. Buyer pays freight cost, please send your post code for an accurate quote. Worldwide voltage and shipping available Learn More
    $17,500.00

  • entec lf20 subwoofers
    $2,500.00

  • B&W ASW 2500 subwoofer
    $890.00

  • Infinity RS1B

    Infinity RS1B

    Legendary. original rs1b, excellent condition, Must be crated for shipping. The system comes in five sections: two woofer columns, two upper-range columns, and an active crossover and servo control module. Each bass column contains six 8" polypropylene-cone woofers. Each upper-range column contains seven of Infinity's proprietary EMIM ribbon midrange drivers and four EMIT ribbon tweeters (one of them aiming out the rear, of all things!). System crossovers are at 125Hz (nominal), 750Hz, 3kHz, and 8kHz, and the number of operating drivers diminishes as the frequency goes up, to minimize vertical treble beaming due to phase interference (eg, above 8kHz only The RS-1B must be biamplified using its own specific crossover/servo module. This has front panel adjustments for woofer crossover frequency, woofer level, bass contour (rising, flat or rolling off with diminishing frequency), LF range (cutoffs at 22, 30, or 36Hz), and amplifier input impedance. The crossover has amplifying circuitry only in the LF section; the signal fed to the upper-frequency amplifiers is passive (unamplified), so there is virtually no possibility of adding nonlinear distortion components to the signal (footnote 1). Because of this, the turnover frequency of the high-pass section varies according to the input impedance of the HF amplifier. (With a given capacitor in series, the crossover point will rise as amplifier input impedance diminishes. When the front panel impedance switch is set to match that of the higher-frequency amplifier (footnote 2), crossovers will occur at frequencies specified in the instruction manual.) There are also driver level adjustments on the upper-range speaker towers, for "Low Tweeter" (2–5kHz) and "High Tweeter" (8kHz up). It would seem you should be able to get just about any kind of sound from the RS-1Bs you wish, and that proves to be almost the case. The servo function requires an unusual woofer hookup. The woofer columns do not connect directly to their LF driving amplifier, but instead to five-way binding posts on the crossover module. The module, in turn, connects to the LF driving amp. This arrangement allows the device to compare LF amplifier output signals with signals appearing across the speaker terminals, and to cancel out any detected differences (which would represent back-EMF from spurious woofer-cone motions). Learn More
    $4,900.00

  • B&W ASW 675 subwoofer
    $600.00

  • Krell LAT or Modulari center channel one of a kind

    Krell LAT or Modulari center channel one of a kind

    Krell LAT / Modulari one of a kind center channel, Dimensions are 21H x 14d x 10w Learn More
    $5,500.00

  • Martin Logan Aerius i local sale only

    Martin Logan Aerius i local sale only

    Martin Logan Aerius i local sale only Frequency Response 40–20,000 Hz ±3dB Horizontal Dispersion 30° Vertical Dispersion 42" (106.7cm) line source High Frequency Transducer 42" (106.7cm) CLS™ electrostatic transducer Low Frequency Transducer 8" (20.3cm) high excursion, high rigidity cone with extended throw driver assembly, non-resonant asymmetrical chamber format; Sensitivity 89dB/2.83 volts/meter Impedance 4 Ohms, 1.7 at 20kHz. Compatible with 4, 6, or 8 Ohm rated amplifiers. Recommended Amplifier Power 20‒400 watts per channel Crossover Frequency 450 Hz Components Custom wound audio transformer, polypropylene capacitors, air core coils Inputs 5-way bi-wire binding posts Weight 55 lbs. (25 kg) Dimensions 55.5" × 10.5" × 12.5" (141cm × 26.7cm × 31.75cm) Learn More
    $775.00

  • Martin Logan Aeon

    Martin Logan Aeon

    Local pick up only. Frequency Response 43–22,000 Hz ±3dB Horizontal Dispersion 30° Vertical Dispersion 37" (94cm) line source High Frequency Transducer 37" (94cm) CLS™ electrostatic transducer Low Frequency Transducer 8" (20.3cm) high excursion, high rigidity cone with extended throw driver assembly, non-resonant asymmetrical chamber format; bass reflex Sensitivity 89 dB/2.83 volts/meter Impedance 4 Ohms, 1.32 at 20kHz. Compatible with 4, 6, or 8 Ohm rated amplifiers. Recommended Amplifier Power 20‒400 watts per channel Crossover Frequency 450 Hz Components Custom wound audio transformers, polypropylene capacitors, air core coils Inputs Custom 5-way bi-wire binding posts Weight 55.5 lbs. (25.2 kg) Dimensions 58" × 10" × 16" (148cm × 26cm × 41cm) Learn More
    $1,300.00

  • Krell Resolution Subwoofer

    Krell Resolution Subwoofer

    local pickup in Florida preferred but can ship, Learn More
    $1,999.00

  • Magnepan MG 1.6

    Magnepan MG 1.6

    Magnepan MG 1.6 pair of loudspeakers, very nice condition. These need to be trucked (usually $200 or so to most major locations, inquire with your post code) 2-Way/Quasi Ribbon Planar-Magnetic Freq. Resp. 40-24kHz ±3dB Rec Power Read Frequently Asked Questions Sensitivity 86dB/500Hz /2.83v Impedance 4 Ohm Dimensions 19 x 65 x 2 Learn More
    $1,050.00

  • Audio Physic Tempo

    Audio Physic Tempo

    Founded over twenty years ago, German manufacturer Audio Physic is known for their unique and innovative designs and incredible performance. Add to that the elegant design, immaculate construction and impeccable finish quality obvious on all Audio Physic models, and you've got a speaker that is a feast for both the eyes and ears. Build quality is outstanding, due in part to each high end Reference Line model is entirely built by a single technician. A pair of Avantera speakers require over eight hours to construct, starting with empty enclosures. The Company's philosophy has become their motto: "No loss of fine detail". That is indeed an accurate of Audio Physic speakers. They capture nuance and subtlety, but never cross over the line and become analytical. They accomplish this task with careful design and selection of every component. From cabinet design to fabrication to drivers and crossovers, every element is carefully researched. Quality is evident from the moment you lay eyes on the beautiful cabinet work. Touch the surface and you'll feel the satin-smooth finish of the carefully finished hardwood. Their attention to detail is remarkable. There are a handful of contenders on my shortlist of the very best imaging speakers available, and Audio Physic is close to the top. When properly set up, these speakers simply cease to exist. They leave behind an almost holographic sound field that gives one the sense of being able to step into the original venue. The sound is not just dimensional, it borders on enveloping. Quite addictive! ONE OWNER, VERY NICE CONDITION Learn More
    $1,350.00

  • Monitor Audio Silver 9i floor standing

    Monitor Audio Silver 9i floor standing

    Small footprint, pretty cabinets, quality, clear sounding $2000/pr retail Learn More
    $800.00

  • Raidho D3.1

    Raidho D3.1

    Virtually new pair of Raidho D3.1 loudspeakers in black. The customer just received brand new and wants to get a larger model. His loss is your gain. Maybe one month of use lin ate 2017. Learn More
    $39,000.00

  • Magnepan MG1.7i
    $1,700.00

  • Celestion SL600 with Stands

    Celestion SL600 with Stands

    Celestion SL600 with Stands The Celestion SL600 is a near-twin to the company's SL6, a speaker whose introduction a couple of years ago aroused considerable favorable comment in the audio world. Although the two speakers use the same two drivers and crossover networks, and although they are almost exactly the same size, the SL600 costs nearly twice as much as the SL6. Why is this? Because the SL600, in design and execution, is truly a "high-technology" loudspeaker system. For example, the cabinet material is really exotic: an aluminum honeycomb sandwich structure called "Aerolam," which was originally developed for aircraft floors. Aerolam is characterized by very light weight and high stiffness, both desirable characteristics in a loudspeaker cabinet. Such properties work to eliminate the resonances unavoidable in wooden cabinets, resonances that Celestion engineers believed imparted some slight coloration to the sound of the SL6 (and, for that matter, to any speaker using conventional wooden cabinet constructions). Aerolam's honeycomb sandwich, like any structural material, does have resonances, but because of its high stiffness-to-weight ratio these occur at much higher frequencies than in a wooden cabinet and are less likely to be excited by the woofer in its frequency range. The inside of the SL600 cabinet is also treated with acoustically absorbent material to damp most of the remaining cabinet-wall resonances, which lie in the range of 1 to 3 kHz. The driver design is also unique. For one thing, the aluminum tweeter dome is integral with its voice-coil former, eliminating any possible decoupling effects from conventional glue joints and providing efficient conduction of heat from the voice coil. The woofer cone, made of Kobex PVC plastic, is molded with an integral plastic center cap, replacing the usual glued-on dustcap and providing a single point of attachment for the voice-coil former. One benefit of this unconventional driver design is said to be very high power handling ability. The SL600 is rated for use with up to 100 watts of program material and may be used safely with amplifiers rated at 100 watts or even more if reasonable care is exercised in the choice of playback level. Learn More
    $999.00

  • Sonance VP69s inwall speaker

    Sonance VP69s inwall speaker

    Sonance VP69s inwall speaker, used price is for each. A total of four available Learn More
    $175.00

  • Definitive Audio Mythos 3  (three available)

    Definitive Audio Mythos 3 (three available)

    Definitive Audio Mythos 3 The perfect speaker solution for flat panel TVs Two high-definition 4-1/2 inch drivers pressure-coupled to two 4-1/2 inch planar Low-Bass Radiators for a total bass radiating surface greater than a that of an 8 inch woofer Hand-polished gloss aircraft-grade extruded aluminum enclosure with proprietary damping technologies to ensure total rigidity and perfectly accurate sound 1 inch Pure Aluminum dome tweeter with an acoustically contoured faceplate for unequaled high frequency extension, detail and smoothness Wall mounting bracket included This model is now out of production but may be avaialble in select markets and retailers. Legendary Mythos® Performance for Flat Panel TVs Maximum Versatility Nothing complements your new high definition flat screen television with more style, versatility and sheer performance than the beautiful Mythos Series models. The Mythos Three is a table/shelf-mount and on-wall center channel speaker in the critically acclaimed Mythos line of high performance loudspeakers. The Mythos Three come with easy-to-install mounting hardware that allows it to mount on the wall above or below your television. Also included is hardware that allows you to place the speaker on the TV or on a shelf or table top. Mythos Three is the perfect match center speaker for the Mythos Two main speakers for a truly exceptional home theater audio system. Superior Performance Components Each Mythos Three contains a D'Appolito array consisting of three high-definition 4-1/2 inch drivers housed in a air-tight enclosure. The drivers feature die cast Aluminum baskets, mono-polymer cones and Finite Element Analysis optimized magnet structures for clear low distortion life-like sound. The drivers are pressure-coupled to two 4-1/2 inch planar Low-Bass Radiators for a total bass radiating surface greater than that of an 8 inch conventional woofer. The result is exceptional bass extension and power not normally found in slim on-wall loudspeakers of this size. The bass roll-off of the Mythos Three is smooth and controlled, allowing it to seamlessly blend with a powered subwoofer, such as Definitive's SuperCubes, for audiophile-grade home theater power and precision. A 1 inch Pure Aluminum dome tweeter produces extended highs that reveal nuance and shimmer without a trace of edginess. Rock-Solid Enclosure Mythos Series enclosures are hand-polished gloss Black aircraft-grade extruded aluminum with proprietary damping technologies that ensure total rigidity. All components are mounted on a resonance-free PolyStone baffle. These rock-solid construction technologies along with state-of-the-art drivers and tweeter serve to deliver classic Definitive Technology sound quality: wide soundstage, pinpoint imaging, high dynamic impact, and superb realism. Versatility The Mythos Three comes with a wall mount bracket that allows direct mounting to a wall and also adapts to flat panel TV swing out arm-style wall mounts so that the speaker angle changes with the TV angle. An adjustable rubber-tipped foot on the supplied table-top mounting hardware permits vertical plane angle adjustment to point the speaker at the ideal angle. Learn More
    $299.00

  • Definitive Audio Mythos XTR SSA-3 soundbar

    Definitive Audio Mythos XTR SSA-3 soundbar

    Definitive Audio Mythos XTR SSA-3 soundbar $800 retail used but excellent Three channels from one superb speaker The perfect audio solution when you are unable or unwilling to use three discrete front speakers Ultra slim design, only 1-5/8" (4cm) deep, perfect for ultra thin LED TVs Wall mount bracket and table stand included The dynamic punch, wide frequency range and broad dispersion of full size speakers Aircraft grade extruded Aluminum enclosure Six anodized Aluminum dome patented XTDD drivers Three pure Aluminum dome tweeters Learn More
    $415.00

  • Thiel CS6

    Thiel CS6

    Thiel CS6, beautiful speakers, the ones to own. Currently in NYC but can be crated and shipped at additional cost Description: Three-way, floorstanding loudspeaker. Drive-units: 1" (25mm) aluminum-dome tweeter with a coaxial 4" (102mm) midrange unit with an aluminum/Styrofoam cone; 10" (254mm) aluminum-cone woofer; 12" (300mm) passive radiator. Crossover frequencies: Not specified. Crossover slopes: Acoustic first-order, 6dB/octave. Frequency response: 28Hz-28kHz, ±3dB. Phase response: minimum phase, ±10 degrees. Sensitivity: 86dB/2.83V/m. Nominal impedance: 4 ohms (2.3 ohms minimum). Recommended power: 100-400W. Dimensions: 50" (1270mm) H by 13" (330mm) W by 18.5" (470mm) D. Weight: 170 lbs (77.3kg) each. Learn More
    $2,600.00

  • Thiel 2.2

    Thiel 2.2

    Thiel 2.2 loudspeakers The CS2.2 is a beautiful floorstander. It uses four drivers. The three active ones include a 1-inch high-output metal-dome tweeter that operates above 3 kHz, a 3-inch midrange driver that operates from 800 Hz to 3 kHz, an 8-inch very-long-throw woofer that operates up to 800 Hz, and a 6 x 9-inch passive radiator. The cabinets have a high-quality lacquer finish and are finished in mirror-matched Amberwood. Mirror-matching means that Thiel went to great lengths to make sure that the inner-side of the left speaker's finish grain matches the inner-side of the right speaker, while the outer side of the left speaker’s grain matches the outer side of the right speaker, and the grain on the top and back of each cabinet is continuous. The finish is simply impeccable. Read more at http://app.audiogon.com/listings/full-range-thiel-cs-2-2-speakers-2013-08-21-speakers-60126#J8DB2psUxeY9Yx8G.99 Learn More
    $750.00

  • Snell LCR 1800 center channel

    Snell LCR 1800 center channel

    Snell LCR 1800 center channel 3 available, price is for each Learn More
    $450.00

  • Velodyne F1200 12" subwoofer

    Velodyne F1200 12" subwoofer

    Velodyne F1200 12" subwoofer Type: single driver subwoofer Frequency Response: 20Hz to 85Hz Sub Bass: 1 x 12" long throw resin/fiber cone Finish: black vinyl woodgrain Dimensions: 16-5/8 x 16-5/8 x 16-5/8 inches Weight: 55lbs Note: 100W power amplifier Learn More
    $350.00

  • Apogee Stage Single Speaker

    Apogee Stage Single Speaker

    A miracle if you have a damaged one or wish for a perfect matching center channel In Illinois (near Wisconsin). Inquire. Learn More
    $650.00

  • Dynaudio surround system, Contour speaker package

    Dynaudio surround system, Contour speaker package

    One owner, excellent All in white Contour 1.8 3200 retail Designed specifically for mid-sized rooms, this two-way speaker features dual active bass drivers incorporating 75 mm (3 inch) woofer voice coils and long throw progressive spiders for improved membrane control. Our renowned soft dome tweeters are the secret behind the Contour 1.8 MKII's incredible sensitivity and dynamic range. These ferrofluid-cooled and damped tweeters are purposely moulded in one piece to provide the listener a perfectly integrated sound Contour center T2 $1800 retail Contour1.3 $2400 retail Don't be fooled by its size - the Contour 1.3 may be small, but it's capable of delivering quite a punch! This re-designed classic now features a double magnet system that incorporates vented magnets on all drivers. The woofers have also been re-modeled to include one piece moulded MSP cones and state of the art, five-duct coil cooling system All in white Will separate if needed at .5 x retail Learn More
    $3,450.00

  • Wilson Audio Watch Surround (one speaker)

    Wilson Audio Watch Surround (one speaker)

    Wilson Audio Watch surround speaker in black, cosmetic blemishes. Please send your post code for an accurate worldwide shipping quot Learn More
    $1,400.00

  • Krell Resolution Center Channel

    Krell Resolution Center Channel

    The Krell Resolution C Channel loudspeaker features a tweeter that has a dual concentric design, with very well-damped ultrasonic resonance and a response beyond 40 kHz. The 4-inch midrange driver used in the Resolution C features a 1-piece chassis and a 1-piece cone and surround. This type of construction minimizes the resonant properties caused by component part boundaries. The midrange driver in the Resolution Center loudspeaker and the tweeter have an integral sealed-chassis design which isolates these drivers from the main enclosure. Resolution C Loudspeaker Specifications: A three-way center channel loudspeaker with two 8" woofers, one 4" midrange, and one 1" dual-concentric ring tweeter with integral waveguide. A sub-enclosure houses the mid and high frequency drive elements. Krell high current crossover featuring double-sided glass epoxy circuit boards used throughout. Cherry finish. Sensitivity 89 dB SPL (2.83V @ 1 m), 4 Ohm nominal impedance Frequency response 48Hz-22kHz +/- 3dB Dimensions (w x h x d) UNIT ONLY 32.0 x 12.3 x 16.7 in. or 81.3 x 31.2 x 42.4 cm SHIPPING BOX 38.8 x 20.3 x 20.3 in. or 98.6 x 51.4 x 51.4 cm Weight UNIT ONLY 90.0 lb. / 40.7 kg SHIPPED 100.0 lb. / 45.5 kg Read more at http://app.audiogon.com/listings/full-range-krell-resolution-c-center-channel-res-c-2013-03-12-speakers-60010#2r8rHcqxStWtZjMz.99 Learn More
    $1,800.00

  • B&W 800 Matrix with Krell KBX former top of the line

    B&W 800 Matrix with Krell KBX former top of the line

    B&W 800 Matrix These were the older angled top of the line speakers. With all hardware and crates http://www.stereophile.com/floorloudspeakers/691bw800/index.html#IlCaIEsYPfEeteYI.97 Three-way, reflex-loaded loudspeaker with line-level bass equalizer. Drive-units: two Description: Three-way, reflex-loaded loudspeaker with line-level bass equalizer. Drive-units: two 12" polymer-cone bass, two 5" Kevlar-cone midrange, one 1.25" ferrofluid-cooled, metal-dome tweeter. Frequency response: 23Hz–20kHz, ±2dB free-field. Impedance: 4 ohms nominal (3 ohms minimum). Sensitivity: 93dB for 2.83V at 1m. Recommended power: 150W–800W. Dimensions: 75.375" H by 19.25" W by 23.25" D. Weight: 240 lbs. Prices: $18,000/pair (rosewood veneer). Manufacturer: B&W Loudspeakers Ltd., Dale Road, Worthing, West Sussex BN11 2BH, England. US: B&W Group North America, 54 North Concord Street, North Reading, MA 01864-2699. Tel: (978) 664-2870. Fax: (978) 664-4109. Web: www.bwspeakers.com. Read more at http://www.stereophile.com/content/bampw-matrix-800-loudspeaker-specifications#cFBMLCRdE1LFQc7M.99 STEREOPHILE Review @ http://www.stereophile.com/floorloudspeakers/691bw800/index.html#VBGLg53HApEY1IJO.97 Shortcomings: There are none. Conclusion: The B&W Matrix 800 redefines the art of loudspeaker design. To this end, it goes far beyond anything else currently available, regardless of price or size. While I can't imagine anyone not being impressed with the sheer dynamic capabilities and enormous soundstage of this speaker, it is far too demanding of time and ancillary electronics for the casual listener. Musically, it has no peers. The B&W 800 is the ultimate musicians' reference transducer, retrieving every nuance of the recorded performance. In fact, I'm putting my money where my music is, and buying the review pair. So if you want the best, and are searching for that elusive dream of the absolute, there is nothing, short of the real thing, that will bring you closer to live music. Read more at http://www.stereophile.com/content/bampw-matrix-800-loudspeaker-page-3#svyFKG6tCbIsvGVt.99 Learn More
    $8,800.00

  • B&W 804 Matrix  (3 speakers)

    B&W 804 Matrix (3 speakers)

    local pick up only, gorgeous condition spec sheet: owner's manual: http://bwgroupsupport.com/manuals/bw-archive Learn More
    $1,300.00

  • Kef Q900

    Kef Q900

    Kef Q900 pair in black The Q900 model is the flagship model of the Q Series range, featuring a new generation Uni-Q MF/HF array paired with a 200mm (8in) long-throw bass driver of equal size, and two matching ABRs. The Q900s will flood the room with an intricate and intensely physical soundstage. As the front speakers in a home theatre system, these towering performers will create a flawless and mind blowing 3-D image that faithfully tracks the action on screen. Learn More
    $820.00

  • B&W 601 series 3

    B&W 601 series 3

    B&W 601 series 3 original box and packing Learn More
    $375.00

  • Thiel 3.6

    Thiel 3.6

    not the prettiest, but drivers all work, black, no boxes. Thiel CS3.6: Three-way, passive radiator-loaded (reflex), floorstanding loudspeaker. Driver complement: 10" woofer, 10" passive radiator, 4.5" cone midrange, 1" metal-dome tweeter. Crossover frequencies: 500Hz, 3kHz. Crossover slopes: first-order (6dB/octave). Time response: 150µs, -20dB. Amplitude response: 27Hz-22kHz ±3dB, 29Hz-20kHz ±1.5dB. Phase response: minimum ±10 degrees. Sensitivity: 86dB/W/m (2.8V). Nominal impedance: 4 ohms (2.5 ohms minimum). Recommended amplifier power: 100-500W. Dimensions: 12.5" W by 48.5" H by 17" D. Weight: 107 lbs each. Learn More
    $1,250.00

  • Linn Keltik

    Linn Keltik

    Linn Keltik The Linn Keltik Aktiv Loudspeaker system is the culmination of many years of experience in driver construction, cabinet fabrication, and active electronic crossover design. The Keltik is an active system; each drive unit is powered by a separate amplifier. Rather than using a conventional internal passive crossover, the Keltik system employs an active electronic crossover located before the power amplifiers. The Linn Keltik Aktiv Electronic Crossover divides the musical signal into three frequency bands and corrects phase, amplitude and time alignment to match precisely the characteristics of each individual drive unit and feeds each frequency band to the appropriate amplifier. The Keltik may be powered with a minimum of three power amplifiers, one for each frequency band. Additional performance advantages may be achieved by employing a fourth amplifier to allow each of the Isobarik bass drivers to be driven independently. For most accurate reproduction we recommend the use of Linn power amplifiers from LK100 upwards. The Keltik employs four Linn-designed drive units. The ferro-fluid ceramic tweeter provides exceptionally low distortion performance even at high signal levels and incorporates an integral airtight enclosure. The midrange unit features a carbon-loaded cone and strong die cast chassis. This driver is mounted in its own irregularly shaped (no parallel sides) Ku-Stone loaded compartment that isolates it from the pressure changes generated by the bass units. The two bass drivers are used in Linn's patented Isobarik* configuration and employ die cast chassis, stiff carbon-loaded cones, large diameter aluminum voice coils and magnets that are nearly twice the size of those employed in Linn's original Isobarik loudspeaker. The front baffle is machined from Topan and the front surface is sculptured to reduce diffraction effects. The enclosure is extensively reinforced and veneered inside and out for added strength and stability. The combination of active electronics, Isobarik bass loading, and Linn's devotion to preserving the integrity of the musical signal sets the Keltik Aktiv Loudspeaker System apart from the competition and provides a level of performance never before possible. Learn More
    $2,500.00

  • Wilson Audio Watchdog Passive

    Wilson Audio Watchdog Passive

    This used passive subwoofer is in desert silver with the original crate Specs from Wilson Audio: Woofer:One - 12 inch Dual Spider (30.48 cm) Sensitivity:83 dB @ 1 watt @ 1m @ 100 Hz Nominal Impedance:8 ohms/minimum 5.6 ohms @ 1 Hz Minimum Amplifier Power:200 Watts (for theater applications) Frequency Response:15Hz - 300Hz Room Average Response Overall Dimensions:Height w/ spikes – 26.875 inches (68.26 cm), Width – 18 inches (45.72 cm), Depth – 25.125 inches (63.82 cm) Weight:211 lbs (95.7 kg) Total Shipping Weight (approx):281 lbs (127.5 kg) Learn More
    $5,899.00

  • Wilson Audio Watt Puppy 5 1.5 pairs

    Wilson Audio Watt Puppy 5 1.5 pairs

    One watt/puppy V pair (Watt V.1 is the same just with a Tansparent Audio jumper cable from Watt to Puppy instead of MIT Description: Small, reflex-loaded monitor loudspeaker with separately enclosed, reflex-loaded woofer system. Drive-units: two 8" polymer-cone woofers, 7" treated-paper midrange unit, 1" inverted titanium-dome tweeter. Frequency response: 28Hz-21kHz, +0/-3dB. Nominal impedance: 4 ohms. Nominal Sensitivity: 93dB/W/m. Minimum power required: 10W. Dimensions: 12" W by 39" H by 16.5" D. Weight: 324 lbs/pair. Learn More
    $5,500.00

  • Rel Storm
    $700.00

  • Wilson Whow III

    Wilson Whow III

    Wilson Whow III coffee table subwoofer with granite top, just refoamed 10/15 The WHOW (downward firing version) was configured in a way and shape to also be used as a coffee table. Because of this, Wilson offered many different options for the top including: Wilsongloss finish, wood finish, and solid granite (granite was the best option if the WHOW was going to be used as a coffee table). from Wilson: http://www.wilsonaudio.com/pdf/manual_whow1.pdf Learn More
    $1,900.00

  • Samsung Shape M7 Black or white

    Samsung Shape M7 Black or white

    Samsung Shape M7 New black or white Learn More
    $299.00

  • Sonus Faber Cremona Center, Left and Right speakers,  NO DRIVERS

    Sonus Faber Cremona Center, Left and Right speakers, NO DRIVERS

    Three spieakers withoiut drivers, Sonus Faber Cremona in grey maple, drivers have been removed Learn More
    $2,500.00

  • Celestion SL6si

    Celestion SL6si

    One owner, classic speaker, great tweeter a second pair is also available. Model: SL6 Si - Celestion Material Wooden case Shape Book-shelf unit. Dimensions (WHD) 375 x 200 x 270 mm / 14.8 x 7.9 x 10.6 inch Notes Book shelf 2 way sealed box walnut veneer wood speakers. Sensitivity 82 db, 8 ohms up to 120W. Net weight (2.2 lb = 1 kg) 8.5 kg / 18 lb 11.6 oz (18.722 lb) Learn More
    $575.00

  • B&W FPM6

    B&W FPM6

    B&W FPM6 onwall speakers With an enclosure height to match the height of 60-inch plasma screens, the FPM6 is the largest model in the FPM Series. Compared to the other models, its enclosure is not only longer, it's wider too, which allows the use of two larger Kevlar® cone bass/midrange drivers each side of the Nautilus™ tube-loaded tweeter. Higher output level capability and greater bass extension result, but timbre matching allows complete freedom to mix different models for left and right front, centre and surround if desired. Freedom and flexibility extend to the four possible mounting options. Use the supplied wall bracket if no tilting of the speaker is needed. If it is, use an Omnimount® type 20.0 or other compatible bracket to get up to 10º of downward tilt. If using a tabletop stand for your screen, simply do the same with the speakers, using the optional table stand. Finally, there is an optional floor stand that supports the speaker at the ideal listening height. Learn More
    $1,100.00

  • Krell Resolution 2

    Krell Resolution 2

    Krell Resolution 2 in cherry in good condition... Drivers are all perfect. Three pairs available. Many other Resolution speakers available separately. RESOLUTION 2 is a three-way floor standing speaker with two 8" woofers, one 6.5" midrange driver, and a one 1" dual-concentric ring tweeter. A sub-enclosure houses the mid/high frequency drive elements. Krell high-current crossover featuring double-side glass epoxy circuit boards are used throughout.The curvature of the cabinets are designed to increase cabinet rigidity while further reducing internal resonant modes. Enclosure type: Bass Reflex, System Sensitivity: 89 dB SPL (2.83 V 1 M), Nominal impedance: 4 Ohms, Frequency Response: 28-22,000 Hz +/- 3 dB. Dimensions W-11.6", H- 48", D- 19.7". Learn More
    $3,300.00

  • B&W Nautilus HTM 2 Center Channel Speaker in black or cherry
    $680.00

  • Peak Consult Empress VII

    Peak Consult Empress VII

    Peak Consult Empress VII like new, original crates $39000 retail factory specs: High frequencies: The Empress VII includes an acoustical fully compensated second order crossover in the tweeter/midrange section and it have been isolated from the moving system in it�s own dual sealed department. The Empress VII only features the best of the best. Duelund Coherent audio foil capacitors, silver carbon resistors and oiled/waxed inductors by Duelund Coherent Audio. Low frequencies: The low frequency includes very large foiled inductors. The low frequencies have also been altered by our straight level impedance and phase control. All sealed in its own isolated compartment. Components: Every component has been chosen for its sonic and musical behaviour, with no consideration for cost. The crossover is crimped and hardwired with silver soldering. The crossover is sealed in it�s own compartment to avoid microphony distortion and to shield it from electrical and magnetic radiation from rest of the system. Peak Consult uses only the best parts to do this High End loudspeaker. Imagine there is used more than 300 meters of components in a speaker and the end user had to decide for his only 2 x something. The speaker has a hart and for that only the finest is exerted. Internal wire: Peak Consult uses a special OEM silver wire from Duelund Coherent Audio foil sealed in pure silk for the upper frequencies and a special Peak Consult manufactured high current cable for the bass. Termination: The true Bi-wire termination is done with The WBT platinum signature.e. Recommended room size: From: 18 square meters and up. The name? The Empress VII boasts an extremely linear frequency response, on-axis as well as of-axis. This makes it a very accurate loudspeaker in a �real World� environment. The name says it all; the speaker performs and looks like the most beautiful Empress. �Nothing given and nothing taken, just pure music� and still behaves like an Empress." Technical specifications Design: Crossover Frequencies: Frequency Range: Sensitivity: Impedance: Dimensions (H x W x D): Weight: 3-way Ported 250 Hz / 2550 Hz 27 � 30000 Hz �3dB in room 89 dB @ 1W/1m 5 ohm linear to 28 Hz 108 X 29,5 X 38 cm. � (42.5� X 11,5� X 15�) Weight: 68-75 kg. � (150-165 lb.) Learn More
    $17,000.00

  • Raidho D2.1

    Raidho D2.1

    Raidho D2.1 black, virtually new, very recent production The Raidho Acoustics D-2.1 is a floor standing loudspeaker with two Raidho Diamond Drivers and one Raidho Ribbon Tweeter. With extra bass extension and greater dynamic headroom, the D-2.1 is a true musical performer. The D-2.1 is a loudspeaker for music enthusiasts who enjoy working with their music system. The D-2.1 will reward you with spectacular musical moments in the company of your favorite music. Learn More
    $25,999.00

  • Linn Majik 140 Loudspeakers

    Linn Majik 140 Loudspeakers

    Linn Majik 140 Loudspeakers with original box and packing, in mint condition Description: Four-way, ported, floorstanding loudspeaker. Drive-units: 0.75" (19mm) fabric-dome supertweeter, 1.17" (30mm) polyurethane elastomer-dome tweeter, 6.5" doped-paper-cone mid/woofer in sealed enclosure, 6.5" glass-fiber-and-composite-cone woofer in vented enclosure. Crossover frequencies: 1.6kHz, 6kHz. Frequency range: 55Hz–20kHz. Sensitivity: 88dB/2.83V/m (1kHz). Nominal impedance: 4 ohms. Dimensions: 38" (975mm) H by 9.75" (250mm) W by 13.1" (335mm) D. Weight: 47 lbs (21.3kg). Learn More
    $1,850.00

  • Artison Sketch loudspeaker pair
    $299.00

  • Monitor Audio Radius 90 white with wall brackets

    Monitor Audio Radius 90 white with wall brackets

    Monitor Audio Radius 90 white with wall brackets Learn More
    $250.00

  • Legacy Audio Xstream Subwoofers (price for each)

    Legacy Audio Xstream Subwoofers (price for each)

    Legacy Audio Xstream Subwoofers (price for each) According to the factory these are the earlier version of the current Xd model. They are similar however the new model has some parts and driver upgrades. Learn More
    $2,400.00

  • Legacy Audio Marquis HD center

    Legacy Audio Marquis HD center

    Legacy Audio Marquis HD center Marquis manual: http://legacyaudio.com/images/uploads/manuals/Marquis_HD_Manual_8_10_2015.pdf Marquis specs: ystem Type: 4 driver, 3 way Tweeter: (1) 1" dual pole AMT folded ribbon Midrange: (1) 7" Silver Graphite, cast frame Subwoofer: (2) 12" spun aluminum diaphragm, rubber surround, total enclosed neo motor, long throw suspension, with cast frame Low Frequency Alignment: 3rd Order Butterworth Freq. Response (Hz, +/-2dB): 22-25K Impedance: 4 Ohm Sensitivity (Room, dB@ 2.83V): 95 dB Recommended Amplification: 15 - 400 Watts Crossover: 250, 4K Binding Post: 1 Pair Dimensions HxWxD (inches): 14 x 38 x 13 Weight: 85 lbs each Shipping Weight: 161 lbs each LFX Xstream sub: Our subwoofers are not just gorgeous pieces of furniture, but have the guts and internal volume to get the job done efficiently. The Xtreme XD features a solid granite black inlay and a new 15” driver with spun aluminum black cone and a massive 35 lb. magnet structure. This active 15" driver feautres an extended stroke and is coupled with a 15" passive radiator, mounted on the bottom of the gorgeous cabinet. The front mounted preamp control panel allows continuous adjustment of level, crossover frequency, and phase. A special blend EQ control assures perfect integration with your speaker system. The internal amplifier modules are the renowned ICEpower® design. These extremely reliable, wideband units are of the same type used in our flagship V speaker system. The 1000 watt Xtreme XD also incorporates a dynamic braking coil which utilizes driver back EMF to counter overshoot as the driver reverses direction or comes to a halt. Using two or more carefully positioned and phased subwoofers can further reduce distortion, minimize response variation due to room modes and enhance transient response. Learn More
    $3,000.00

  • B&W Matrix 3

    B&W Matrix 3

    Black, local pickup in Florida only Learn More
    $500.00

  • Wilson Audio Watt 5.1  with matching Wilson Whow subwoofer in gloss cherry wood veneer

    Wilson Audio Watt 5.1 with matching Wilson Whow subwoofer in gloss cherry wood veneer

    Wilson Audio Watt 5.1 with matching Wilson Whow subwoofer in gloss cherry wood veneer They will need to be crated at additional cost if you wish them shipped. Watt Puppy specs: Description: Small, reflex-loaded monitor loudspeaker with separately enclosed, reflex-loaded woofer system. Drive-units: two 8" polymer-cone woofers, 7" treated-paper midrange unit, 1" inverted titanium-dome tweeter. Frequency response: 28Hz-21kHz, +0/-3dB. Nominal impedance: 4 ohms. Nominal Sensitivity: 93dB/W/m. Minimum power required: 10W. Dimensions: 12" W by 39" H by 16.5" D. Weight: 324 lbs/pair. Learn More
    $6,000.00

  • Triad inwall bronze Satellite

    Triad inwall bronze Satellite

    3 available, plus a bronze omni and a bronze active subwoofer Learn More
    $1,200.00

  • Meridian DSP5500 surround system 24/96 versions 5 speakers (will split)

    Meridian DSP5500 surround system 24/96 versions 5 speakers (will split)

    Four main DSP5500 speakers and one DSP5500HC center channel. Even more dsp5500's are also available as well as dsp6000 mains. inquire Specification Performance: Frequency response in-room within 3dB from 30Hz to over 20kHz. Output >112dB spl @ 1m on music material. Noise less than 15dB spl. Overall distortion typically <0.02% at any frequency or level. Inputs: Two digital inputs to SPDIF standard; 32kHz–96kHz sampling rates at up to 24 bit; MHR support. (A future software update will enable support for 192kHz.) Construction: 3-way acoustic reflex system. 2 x 200mm long-throw bass drivers. 1 x 160mm polypropylene mid driver in separate enclosure. 1 x 25mm aluminium-dome tweeter, silver wire, short hornloaded with protective grille. Cabinet constructed from high-density MDF. Integral magnetic shielding and user-changeable real wood veneer acoustic damping side panels. FIFO memory buffer input for the lowest possible jitter from almost any source. Four precision 128x oversampling converters for bass, mid and tweeter signals Analogue gain and filtering using proprietary Meridian Class-A discrete amplification. Digital and conversion electronics constructed using advanced surface-mount techniques and partitioned 6-layer printed-circuit boards. Four 75W power amplifiers, one for each of the drivers. Power amplifiers use a unique feedback topology and precision local error-correction systems to achieve a performance equivalent to the conversion sys tem. Dimensions: 1100mm (43.31in) H, 284 (11.2) W, 450 (17.72) D Weight 81kg (179lbs) each DSP: 100MHz Motorola digital signal processor. Digital crossover at 200Hz and 2.6kHz. Response correction for the whole system. Controls: Rear-panel controls for Power On/Off. MSR and RS232 port provide control over bass, treble tilt, listening axis, volume, time-compensated balance and absolute phase. Front display: Eight-character display with system lights, can be blank Learn More
    $6,500.00

  • Sonus Faber Electa Amator II

    Sonus Faber Electa Amator II

    A used pair in very nice used condition. The original wood and metal stands are available separately for $800. The Sonus Faber Electa Amator 2 is a pair of award winning speakers for the European High-End Audio of the year '98-'99. The combination of walnut and leather won over as the choice of many audiophiles. The standard of craftsmanship of hand made units cannot be undervalued in the days of mass production. The look and build quality of the Sonus Faber Electa Amator 2 are first-rate, especially when supported with the compatible stands. The pleasing aesthetics of fit and finish of the woodwork is an excellent piece of a conversation starter. The quality of sound matches well with its attractive appearance to become one of the most sought after speakers in the market. One thing great about these Italian Sonus Faber speakers are their ability to portray music with a sensual airy ambience. Sonus Faber speakers may not have the best treble, may not have the best midrange, may not have the best bass and may not even be the most detailed. But it is its ability to create music with heart and soul that sets itself apart. In general, American speakers perform with focus of rhythm, punch and dynamics. British speakers usually have a more pronounced fuller midrange which makes them especially good in vocals and jazz. For Italian speakers, they focus on the highs which brings out the heart and soul of string instruments. Most Sonus Faber users spend alot of their time listening to instrumental and orchestral music. Violin and string instruments sound exceptionally pleasing on Sonus Faber speakers. In fact, some of the Sonus Faber products are named after some of the greatest violinmakers of the past - Guarnieri, Amati and Stradivari. The Sonus Faber Electa Amator 2 is astonishingly musical and detailed, bold yet refined. The Amator 2 has a more open nature than the Amator 1 which can be even more of an asset if matched right. The sound is also very natural with total transparency and outstanding resolution, even when playing demanding music. It gives life when listening to every kind of music, and absolutely shine with string instruments, piano as well as vocals. Even more impressive is the peerless conveyance of massed strings of violins, which most expensive speakers fail to deliver. It has deep bass, great control and without distortion. The midrange is rich, palpable and articulate. The higher treble is as clean as a whistle, and do not sound shrill or overly bright but controlled and smooth. The soundstage is wide and deep with excellent 3D imaging. They are transparent across the range, sounding real and not synthetic. The Sonus Faber Electa Amator 2 is an example of excellence in the world of hifi sound reproduction. Specifications : Type...............................................14 liter two-way with passive radiator Tweeter...........................................20mm silk dome high-resolution type Mid-Woofer.....................................180mm high-performance, low distortion driver. .....................................Copper ring system voice coil. Paper carbonium cone. Low Bass........................................35Hz tuned, passive radiator with special high density paper cone Crossover........................................2.5kHz first order attenuated Sensitivity........................................88 dB/m/W Impedance.......................................8 ohms nominal Power Consumption.........................30 to 200 W Frequency Response........................35Hz to 20kHz Cabinet...........................................23 individual struts of solid walnut for resonance control Dimensions(w x d x h)......................22.5 x 38.5 x 38 cm Weight............................................13kg per side Miscellaneous : Made In...........................................Italy Learn More
    $3,600.00

  • Snell Type A reference speaker system

    Snell Type A reference speaker system

    used, two black mains, two snell crossovers black thx larger snell center http://www.stereophile.com/floorloudspeakers/snell_acoustics_type_a_reference_loudspeaker/ Learn More
    $5,500.00

  • The electa is the one in the middle.
    $2,000.00

  • Wilson Audio Watt Series 3 Puppy 2

    Wilson Audio Watt Series 3 Puppy 2

    A pair of Wilson Audio Watt 3/Puppy 2 speakers in black. Newer velco/pads on the tops, currently putting new pads/velcro and grills on everything. See review here! Specifications: WATT 3: Two-way, stand-mounted loudspeaker with reflex bass loading (QB3, quasi third-order Butterworth alignment fitted with 1"-diameter, 1.75"-deep port suitable for amplifiers with damping factors (DF) of 100 to 400; alternative port supplied for amplifiers with DF between 20 and 80). Drive-units: 1" inverted-dome tweeter, 6.5" doped-pulp–cone midrange/woofer unit. Estimated crossover frequency: 3.7kHz. Frequency response: 58Hz–18kHz +1, –3dB. Nominal impedance: 4 ohms (measured minimum 1.7 ohms at 2.4kHz). Sensitivity: 91dBA/W/m. Amplifier requirements: 30W minimum. Subjective performance Q: 1 (–6gb points). Dimensions: 13.625" H by 11.1" (11.9" wood-paneled) W by 16.5" D. Enclosure volume: 12 liters. Weight: 120 lbs/pair (166 lbs shipping weight). Puppy: floorstanding subwoofer with integral high-pass crossover for WATT 2 and 3 and reflex bass loading. Drive-units: two 7.5" plastic-cone woofers. Estimated frequency response (–3dB) when driven by integral low-pass crossover: 30Hz–130Hz. Nominal impedance: 4 ohms. Dimensions: 24" H by 11.3" W by 16.5" D. Learn More
    $3,800.00

  • Wilson Audio Alexia

    Wilson Audio Alexia

    Wilson Audio Alexias in Macadamia and other finishes. Inquire Enclosure Type Woofer:(Rear Ported) X-Material Enclosure Type Midrange:(Rear Vented) X-Material/S-material baffle Enclosure Type Tweeter:(Sealed) X-Material Woofers:8 inches (20.32 cm) 10 inches (25.4 cm) Midrange:7 inches (17.78 cm) Tweeter:1 inch, Dome (2.54 cm) Sensitivity:90 dB @ 1W @ 1m @ 1k Nominal Impedance:4 ohms / minimum 2 ohms @ 80 Hz Minimum Amplifier Power:20 Watts per channel Frequency Response:20 Hz – 32 kHz +/- 3 dB Overall Dimensions:Height: 53 1/4 inches (135.29 cm) w/spikes Width: 15 1/4 inches (38.74 cm) Depth: 21 1/8 inches (53.70 cm) Approx. System Weight Per Channel:256 lbs (116.12 kg) Learn More
    $29,999.00

  • Avalon Ascent

    Avalon Ascent

    Avalon Ascent, burl walnut, these were excellent condition but now have a ding on the top back of one of them. Please check pictures carefully there is some small damage on the back corner area of one speaIn proper working condition with external crossovers. Burl walnut. Total weight uncrated is over six hundred pounds. These are currently in the New York City area but can be shipped anywhere after crating (additional $300) Type: 3 way, 3 driver loudspeaker system Frequency Response: 28Hz to 24kHz Recommended Amplifier: 50 to 300W Impedance: 6Ω Sensitivity: 88dB Bass: 1 x 11" cone Midrange: 1 x 2" dome Tweeter: 1 x 1" titanium dome Dimensions: 1143 x 330 x 457mm Learn More
    $5,000.00

  • Rockustics Rocky Jr.

    Rockustics Rocky Jr.

    New, never used pair Rockustics Rocky Jr. Outdoor Speaker, Model ROCKYJRGR Rockustics aren't just great speakers put into pretty frames – they are the product of custom sound contractors, acoustic design engineers and specialists in applied fine arts working together to create a speaker like no other. A speaker whose form and function operate as one to create a harmonic feast for your ears and eyes. This speaker is not inside a rock; the speaker and the rock are one and the same. All Rockustics are 100% water- and weatherproof with loudspeaker components that are fiber-reinforced polymer composite and proven to resist rain, frost, snow and ice. And to prove just how tough our speakers are, they back each and every model with a "Zero Defects" Lifetime Manufacturer's Warranty. All Rockustics speaker components are made exclusively by Vifa with acoustic performance designed specifically for outdoor use. Rockustics speakers are engineered with a lift at higher frequencies for maximum dissipation in the open air and the internal design of the speakers features non-parallel sides to minimize unnatural resonance from the outside. In addition, Rockustics utilized professionally manufactured crossovers for exceptional performance. When used in concert, specific frequency ranges filtered exclusively into the separate Rockustics subwoofers, tweeters and midrange speakers allow for optimum sound delivery–free from even the slightest trace of distortion. Also, with the look of volcanic lava rock, this 2-way speaker emits sound over a 100-150 foot distribution radius and is exceptional for the largest outdoor areas. Specifications: 6.5" woofer - 1" tweeter 100 Watts Frequency Response: 69 Hz - 19 kHz Efficiency: 89 dB Maximum Nominal Impedance: 4 Ohm Connectivity Technology: Cable Dimensions: Width: 20" Height: 16" Depth: 10.5" Approximate Shipping Weight: 40 lbs. ea Learn More
    $800.00

  • Velodyne HGS 12

    Velodyne HGS 12

    Although we recently published a review of the Velodyne HGS-10 subwoofer, the innovative technology that is inherent to this new class of subwoofer warrants a review of their latest edition, the HGS-12. We understand that subwoofer aficionados in our readership want to know about the 12" version, and it will be some time before reviews appear in the printed trade. So here goes. The HGS-12 (HGS stands for High Gain Servo) has a 12" driver with a 19.3 pound magnet structure and 3" tandem push-pull voice coil. Front of Driver (3750 bytes)This is the same driver as in the FSR-18, without the bucking magnet. It is also the same driver as in the HGS-10. HGS AmplifierVelodyne is quite pleased with the new driver design and is using it in all of their high performance servo-feedback subwoofers, with the cone sized accordingly. I really enjoy our F-1500s and FSR-18s, but they are BIG. The HGS-10 and HGS-12 will fit nicely behind the couch if necessary. Is the size of the box that important as far as being furniture-friendly? Apparently so to a lot of people. But the problem has been in getting high performance from a small enclosure. Enter the HGS-10 and HGS-12. In the HGS-12, the piston size is 11", and the actual edges of the mounting rim extend the total driver size to 12". A large dust cap makes the driver shallow. An enormous rubber surround allows for large excursion. The sub is powered by their new digital switching (Class D) amplifier (140 kHz switching frequency at the output stage), rated at 1,250 watts rms (that's a LOT of power!) into the driver which dips to 3.2 Ohms. Servo-feedback technology is utilized (solid state motion detector mounted near the voice coil), as is on all Velodyne high performance models. Panel (3396 bytes)There are 78.6 joules of energy storage capacity in the power amplifier. On the back are an ungrounded AC socket, RCA line-level inputs and high-pass (80 Hz, 6 dB/octave) outputs, Volume control, Low-Pass crossover control (40 Hz - 120 Hz, 12 dB/octave initially, 48 dB/octave ultimately), Crossover in/out switch, Phase toggle (00 or 1800), Subsonic selection (20 Hz or 35 Hz cutoff), and a remote sensor socket. The enclosure is nicely finished in gloss black polymer veneer. For testing (listening and measurements), we placed the HGS-12 on the floor, 2 feet out from a wall. The 20' x 20' testing lab has wall to wall carpet, and no windows. The HGS-12 complimented our McCormack CD system, McCormack ALD-1 Preamplifier, LLano Monoblocks, and Threshold ES-500 Electrostatic Speakers. Cables were Nordost SPM Reference and Nordost Red Dawn. For room response measurements, the low pass was set to 120 Hz, the crossover switch was set to "In", and the subsonic cutoff was set at 20 Hz. The volume control was at mid-level. Room Response - Velodyne HGS-12 Subwoofer -- Grille off -- Set to 90 dB at 20 Hz -- (This is not maximum output, but rather just the response in an "average" room with the volume set to 90 dB at 20 Hz.) 1 meter 13 feet 10 Hz 72.7 dB 10 Hz 82.4 dB 12.5 Hz 69.0 dB 12.5 Hz 86.4 dB 16 Hz 80.6 dB 16 Hz 92.1 dB 20 Hz 90.4 dB 20 Hz 90.7 dB 25 Hz 93.8 dB 25 Hz 98.7 dB 31.5 Hz 97.3 dB 31.5 Hz 103.6 dB 40 Hz 88.1 dB 40 Hz 104.4 dB 50 Hz 95.8 dB 50 Hz 101.2 dB 63 Hz 92.3 dB 63 Hz 107.0 dB 80 Hz 93.3 dB 80 Hz 94.0 dB 100 Hz 93.2 dB 100 Hz 98.4 dB 125 Hz 85.9 dB 125 Hz 97.9 dB 160 Hz 81.7 dB 160 Hz 87.4 dB The HGS-12 has usable output down to 16 Hz (farfield). Even in the deep regions at high output, we could hear no harmonics, and our Spectrum Analyzer showed no harmonic peaks within about 20 dB of the fundamental (the sinewave test frequency). We could get 112 dB SPL nearfield at 31.5 Hz, which is similar to an F-1500, before limiters set in. I never heard the HGS-12 amplifier clip. That isn't to say that it can't be done, but the limiters keep this from happening under normal circumstances. This new digital switching amplifier stuff is really amazing! The built-in amplifier remained stone cold even after extensive use at full output. Notwithstanding problems they might have with full spectrum sound, they sure make dynamite amplifiers for subwoofers! Our ES-500 Electrostatic Speakers are full range units, and even though they respond to quite low frequencies, it is hard work. I used our Mirage LFX-3 active crossover to attenuate frequencies below 50 Hz in the electrostatics, and the HGS-12 made a huge difference in the overall sound presentation. The electrostatic panels were alleviated from having to handle the lows, making them perform better in the mids and highs, while the HGS-12 moved all the air necessary to make the wall studs shudder. Of course, the HGS-12 was great with home theater material, but putting this sub with the $11,000 ES-500s was illuminating as to its high performance capability in the realm of classical music. Powerful, deep, and clean. Nothing else needs to be said. In summary, the HGS-12 is the big brother to the HGS-10, and both are new additions to Velodyne's line of servo-feedback subwoofers. Although neither of these products will stomp on the Velodyne FSR-18, the HGS-12 sure will make you scratch your chin when deciding between it and conventional 15" subs. Learn More
    $550.00

  • Wilson Audio Cub II  stand only, one piece
    $500.00

  • Magnepan MG 1.4

    Magnepan MG 1.4

    Magnepan MG 1.4 no boxes, local pickup in Florida preferable. Do not purchase without talking to us The Magnepan MG-1.4 loudspeaker was conceived and designed for perfectionists. One of the most revealing loudspeakers made, it will provide outstanding music reproduction when used with high quality components. Due to the elegant simplicity and ruggedness of the design, the Magneplaner MG-1.4 loudspeakers will give many years of trouble free service. Specifications Type: 2 way, 2 driver loudspeaker system Frequency Response: 40Hz to 18kHz Recommended Amplifier: 100 to 200W Crossover Frequency: 1000Hz Impedance: 5Ω Sensitivity: 87dB Bass: 1 x 428" sq Tweeter: 1 x 68" sq Grille: off white, black, grey fabric Finish: oak trim Dimensions: 22 x 60 x 2 inches Weight: 35lbs Learn More
    $440.00

  • Wilson Audio Watt V/Puppy  system  SEVERAL SETS AVAILABLE IN DIFFERENT COLORS

    Wilson Audio Watt V/Puppy system SEVERAL SETS AVAILABLE IN DIFFERENT COLORS

    Wilson Audio Watt V pair, with the Puppy woofers. Used. We have multiple pairs, most with just refoamed woofers with better , long lasting surrounds that will last decades. We have in black, cherry and white. See review here! Description: Small, reflex-loaded monitor loudspeaker with separately enclosed, reflex-loaded woofer system. Drive-units: two 8" polymer-cone woofers, 7" treated-paper midrange unit, 1" inverted titanium-dome tweeter. Frequency response: 28Hz-21kHz, +0/-3dB. Nominal impedance: 4 ohms. Nominal Sensitivity: 93dB/W/m. Minimum power required: 10W. Dimensions: 12" W by 39" H by 16.5" D. Weight: 324 lbs/pair. Learn More
    $4,700.00

  • Bang & Olufsen  Beoloab 5500 receiver, tape deck and Penta loudspeakers

    Bang & Olufsen Beoloab 5500 receiver, tape deck and Penta loudspeakers

    Bang & Olufsen Beoloab 5500 receiver, tape deck and Penta loudspeakers Learn More
    $1,800.00

  • Focal Maestro Utopia

    Focal Maestro Utopia

    Focal Maestro Utopia $55000 retail, current model in Red (just like in the ads you've seen in all the high end magazines) Comes complete with original crates and hardware. In excellent cosmetic and perfect working condition. Please contact us for a freight quote with your postal code. Unless you have impeccable credentials, we will ask that this be paid for by bank transfer. We can save you the processing fees of roughly 3% also. Factory specs: A three-and-a-half-way loudspeaker, Maestro Utopia is one of the most sophisticated loudspeakers produced by Focal. To get closer to the Grande Utopia EM model without resorting to an electromagnet, it innovates in the bass with the MDS (Magnetic Damping System) to adapt to the listening room. With its 93dB efficiency, its punchy dynamics and its outstanding definition, its power capacity seems unlimited. Maestro is also suggested as a studio mastering midfield system. Learn More
    $29,500.00

  • Kinergetics Subwoofer amplifier
    $380.00

  • Duntech Sovereign 2001

    Duntech Sovereign 2001

    Duntech Sovereign 2001, one owner pair in oak. They will need to be crated for international shipment and shipment to most US locations The Duntech Sovereign 2001 system carries a list price of $20,000, which includes shipping. It consists of two black towers standing 74 inches high on a 32 x 14-inch base. Each contains two 12-inch woofers, two midrange units and a tweeter in an unusual configuration that creates the impression of all sound issuing from a single point. This results in highly accurate reproduction of the spatial relationships in the sound of the original performance. Based on some highly original theoretical calculations by the Australian physicist John Dunlavy, the Duntech is distinguished by an extraordinary degree of what might be called sheer musicality. Learn More
    $6,000.00

  • VPI TNT upgraded

    VPI TNT upgraded

    VPI TNT upgraded, upgraded with Classic IV 12" tonearm, classic feet, classic platter, dual speed pullley. Ships in original two boxes Learn More
    $4,600.00

  • B&W 801 Matrix series 2

    B&W 801 Matrix series 2

    B&W 801 Matrix series 2 with original stands. Local pickup in Florida preferred, no boxes Excellent drivers Learn More
    $2,150.00

  • Aerial Acoustics System 1 speaker package

    Aerial Acoustics System 1 speaker package

    Aerial Acoustics System 1 speaker package including two subwoofer amplifiers AERIAL SYSTEM 1 Modern problems often require innovative solutions. For example, how does one recreate remarkable movie and music experiences at home without giving up precious living space to room-dominating loudspeakers? Let us introduce you to the Aerial SYSTEM 1. SYSTEM 1 is an exceptionally capable multi-channel speaker system that surrounds large format video screens to form an integrated unit only twelve inches deep and barely wider than the screen itself. An impressive assemblage of audio technologies, SYSTEM 1 employs twenty-five custom-designed drivers within its high-performance left, center, and right channel loudspeakers and twin high-output subwoofers. Legendary Aerial performance is discreetly integrated within a slender, unobtrusive unit. Its modular design allows SYSTEM 1 to accommodate video screens of different sizes, types and aspect ratios. Whether your screen has an HDTV 16×9 or CinemaScope 2.35:1 aspect ratio, is flat or curved, or incorporates variable masking, each SYSTEM 1 includes everything required to create an assembly seemingly tailor-made to your specifications. What’s more, unlike completely customized built-in systems, the adaptable SYSTEM 1 can be moved to a different space or re-sized for a different screen. A neutral aesthetic design allows the SYSTEM 1 to blend with any décor. Equally important, it does not compete for the eye’s attention to images on the screen. For all its practicality, the SYSTEM 1 provides a decidedly emotional experience. Its personality is lifelike and dynamically expressive, with a clear and natural midrange voice, airy extended upper frequencies, and powerful extended bass. Both music and film soundtracks are rendered in an inviting, engaging, and thoroughly enjoyable way. The Aerial SYSTEM 1. It’s that simple. All sort of options available including Stewart screen, Aerial rears and control system separately. Learn More
    $15,000.00

  • Thiel 3.5 with equalizer

    Thiel 3.5 with equalizer

    Thiel 3.5 with equalizer, speakers are currently in NYC. Inquire if you are on the east coast I95 corridor. Difficult to ship without boxes Description: Three-way, sealed-box loudspeaker with line-level bass equalizer. Drive-units: 1" soft-dome tweeter, 4" paper-cone midrange unit, 10" plastic-cone woofer. Crossover frequencies: 400Hz, 3kHz. Frequency response: 20Hz–20kHz ±2dB. Sensitivity: 88dB/W/m. Nominal impedance: 4 ohms. Minimum amplifier power: 40W. Dimensions: 41" H by 13" W by 13" D. Weight: 75 lbs each. Learn More
    $1,000.00

  • Sonus Faber Concerto

    Sonus Faber Concerto

    Sonus Faber Concerto price is per pair, two pairs are available. Learn More
    $1,500.00

  • Sonus Faber Concertino

    Sonus Faber Concertino

    Sonus Faber Concertino, used pair in good condition. Learn More
    $1,200.00

  • Snell SUR500 surround speaker pair

    Snell SUR500 surround speaker pair

    Snell SUR500 surround speaker pair $1800/pr retail Learn More
    $550.00

  • Snell LCR or SUR factory speaker stands

    Snell LCR or SUR factory speaker stands

    Snell LCR or SUR factory speaker stands Learn More
    $450.00

  • Cello Center Channel

    Cello Center Channel

    Cello Center Channel (Master?) ridiculously large Weighs A LOT, Learn More
    $5,000.00

  • Wilson Audio Whow II universal  subwoofer cherry

    Wilson Audio Whow II universal subwoofer cherry

    Wilson Audio Whow II subwoofer cherry (matches a set of Watt V we have for sale separately) The WHOW (downward firing version) was configured in a way and shape to also be used as a coffee table. Because of this, Wilson offered many different options for the top including: Wilsongloss finish, wood finish, and solid granite (granite was the best option if the WHOW was going to be used as a coffee table). Learn More
    $1,500.00

  • JM Lab Focal 913 Spectral
    $1,600.00

  • James Loudspeaker EMB-1200

    James Loudspeaker EMB-1200

    James Loudspeaker EMB-1200 very good condition Description: Powered bandpass subwoofer in sealed enclosure with signal-sensing auto on/off. Drive-units: 12" long-excursion, cone driver with 3" push-pull voice-coil and 15-lb magnet, 12" brushed-aluminum-cone passive radiator. Frequency response: 20-150Hz, ±3dB. Low-pass filter: 40-150Hz (variable, defeatable), 24dB/octave slope. No high-pass filter. Total harmonic distortion: <0.5%. Amplifier: 1200W RMS, 3600W peak (class-D). Inputs per channel: 2 line-level (RCA), 2 high-level. Speaker terminals: 4 (bare wire, banana plugs, or spade lugs). Outputs: 2 line-level (RCA). Controls: Level, Phase (0 degrees/180 degrees), Crossover (variable, 40-150Hz, and Bypass), Gain, Power On/Off. AC included. Dimensions: 14.6" (375mm) H by 14.6" (375mm) W by 17.5" (450mm) D. Shipping weight: 75 lbs (35kg). Learn More
    $799.00

  • Monitor Audio Gold Reference 20

    Monitor Audio Gold Reference 20

    Monitor Audio Gold Reference 20, original box/packing. These must ship by truck, please leave your post code for an accurate freight quote Learn More
    $1,400.00

  • Emerald Physics 2.7 Cocobola

    Emerald Physics 2.7 Cocobola

    Emerald Physics 2.7 Cocobola, excellent condition, all original packing The EP2.7 is a 3-way, 4 driver, bi-amplified, dipole speaker design. Cutting edge sonic performance establishes a new level of realism and dimensionality at its price. Our proprietary Aperture Bass Propagation Technology is used for both custom Emerald Physics 15" dipole woofers, improving low frequency power and linearity, while retaining all the speed and articulation of the EP2.3. DSP equalization and active crossover functions are provided by the included Special Edition passive midrange/tweeter crossovers and the Emerald Physics DSP2.4 digital electronic crossover between the woofers and midrange. Learn More
    $4,510.00

  • B&W 804 Matrix

    B&W 804 Matrix

    B&W 804 Matrix, in New York, inquire about shipping options Learn More
    $1,000.00

  • Wilson Audio Cub single black

    Wilson Audio Cub single black

    Wilson Audio Cub in black Description: Two-way, reflex-loaded loudspeaker. Drive-units: 1" inverted metal-dome tweeter, two 6.5" treated-paper cone woofers. Crossover frequency: 1.8kHz. Frequency response: 50Hz–25kHz, ±3dB; 55Hz–22kHz, ±1.5dB. Sensitivity: 94dB/W/m. Nominal/Minimum Impedance: 4 ohms/2.8 ohms at 400Hz. Recommended minimum amplifier power: 7W. Dimensions: 22" H by 10" W by 22" D (to nearest inch, including crossover cups). Weight: 75 lbs each. Learn More
    $1,200.00

  • Sunfire True Subwoofer MKIV just serviced

    Sunfire True Subwoofer MKIV just serviced

    Sunfire True Subwoofer MKIV recapped and serviced 8/2017 Learn More
    $699.00

  • B&W 805 Nautilus

    B&W 805 Nautilus

    B&W 805 Nautilus black Description: Two-way, stand-mounted, reflex-loaded dynamic loudspeaker. Drive-units: one 1" (25mm) metal-dome cooled tweeter, one 6.5" (165mm) woven-Kevlar bass/midrange cone with 1.24" (32mm) voice-coil. Crossover frequency: 3kHz. Crossover slopes: third-order Butterworth alignment with 49Hz cutoff. Frequency response: 49Hz-22kHz, ±3dB. Sensitivity: 88dB/W/m (2.83V). Nominal impedance: 8 ohms (minimum: 4.6 ohms). Amplifier requirements: 50W minimum, 120W maximum. Maximum recommended cable impedance: 0.2 ohms. Dimensions: 16.3" (415mm) H by 9.4" (238mm) W by 13.5" (344mm) D. Weight: 20 lbs (9kg). Learn More
    $1,850.00

  • Wilson Audio Sasha  red

    Wilson Audio Sasha red

    Wilson Audio Sasha, original crates and spikes, one owner, gorgeous, In red Description: Three-way, reflex-loaded, floorstanding loudspeaker. Drive-units: 1" titanium inverted-dome tweeter, 7" pulp-composite midrange cone, two 8" polymer woofer cones. Sensitivity: 91dB/2.83V/m. Impedance: 4 ohms nominal, 1.9 ohms minimum. Dimensions: 44" (1118mm) H by 14" (356mm) W by 21.25" (539mm) D. Weight: 197 lbs Learn More
    $13,000.00

  • Rel G1 MK2

    Rel G1 MK2

    Rel G1 MK2 as new, all packing and accessories, perfect condition, virtually new Learn More
    $3,999.00

  • Klipsch Cornerhorns

    Klipsch Cornerhorns

    Klipsch Cornerhorns vintage in excellent condition, these are in New York and are local pickup/delivery only. Audio pioneer and company founder Paul W. Klipsch launched the Klipschorn loudspeaker in 1946 to enable people, for the first time ever, to experience the power, detail and emotion of a live performance at home. Commonly called a corner-horn speaker, the remarkably uncommon Klipschorn includes a highly efficient horn loaded tweeter and midrange compression driver. Its patented folded-horn 15" woofer delivers powerful low frequencies. Features: Highly efficient: 105 dB 1W / 1M Fully horn-loaded, full range, three-way system with a patented folded-horn 15" woofer delivers powerful low frequencies 2" midrange and 1" tweeter compression drivers Capable of extreme output levels with ultra low distortion and astonishing dynamic range Learn More
    $2,400.00

  • Duette with stands

    Wilson Duette with stands

    Specifications: Two-way, reflex-loaded bookshelf loudspeaker with separate crossover enclosure. Drive-units: 8" cone woofer, 1" silk-dome tweeter. Sensitivity: 90dB/W/m/kHz. Nominal impedance: 4 ohms. Minimum impedance: 3.96 ohms at 3.1kHz. Recommended amplifier power: >20W. Dimensions: 18.4" H by 9.4" W by 13.75" D. Weight: 39 lbs each 210 pounds for pair with crates Learn More
    $6,999.00

  • watchdog

    Wilson Watch Dog Subwoofer - passive

    Woofer:One - 12 inch Dual Spider (30.48 cm) Sensitivity:83 dB @ 1 watt @ 1m @ 100 Hz Nominal Impedance:8 ohms/minimum 5.6 ohms @ 1 Hz Minimum Amplifier Power:200 Watts (for theater applications) Frequency Response:15Hz - 300Hz Room Average Response Overall Dimensions:Height w/ spikes – 26.875 inches (68.26 cm), Width – 18 inches (45.72 cm), Depth – 25.125 inches (63.82 cm) Weight:211 lbs (95.7 kg) Total Shipping Weight (approx):281 lbs (127.5 kg) Learn More
    $5,899.00

  • Hansen The King Version 2 Speakers

    Hansen The King Version 2 Speakers

    Hansen The King Version 2 Speakers - Silver with crates it is a five-driver three-way design, said to extend from the low 20s in Hertz, up to and past the point of good hearing. Its sensitivity is rated at 89dB (referred to the usual specs) and all of its drivers, save the mystery tweeter, are designed, formulated, and manufactured inhouse, at Hansen’s Ontario facility. As you may see, if you stop now and read my interview with Hansen, the aim here was to reduce conventional moving-coil speaker/enclosure colorations to an unprecedented degree, thus allowing more of the sense of music, its timbre, to shine through. The first thing that struck me about these speakers was their coherency, which, in this case, made the system sound as if it were a singularity— that is, one thing. Note, I am not saying it is perfect in this regard, nor does it have the seamlessness of, say, a full-range electrostatic, but it is, for a cone/dome hybrid design, an accomplishment. It is also frighteningly revealing. Type: Full range floorstanding loudspeaker Design: Time coherent, Dispersion coherent Tweeter: 25mm designed & manufactured for Hansen Tweeter Mounting: 6mm dispersion optimized aluminum plate. Midrange Drivers: two 182mm Hansen designed and built Bass Drivers: two 269mm Hansen designed and built Nominal impedance: 6 Ohms Sensitivity: 89dB/W/m Frequency Response: 18Hz to 23kHz (±2dB) Input Connectors: WBT Signature Platinum - no biwire Crossover: Frequency and phase optimized, point to point silver solder connections Finish: Hansen Audio Class A Finish Enclosure Material: Hansen Composite Matrix Dimensions: 19 x 63 x 20.5 (WxHxD in inches) Weight: 300 lbs each (with crate Learn More
    $23,995.00

  • Revel S-30 surround speakers

    Revel S-30 surround speakers

    Revel S-30 surround speakers DESCRIPTION Performa Series, Surround Speaker FREQUENCY RESPONSE In-room response; ±1.5 dB from 85 Hz to 16 kHz In-room response relative to target response; ±0.75 dB from 80 Hz to 20 kHz First reflections response; ±1.75 dB from 84 Hz to 14 kHz Listening window response; ±1.5 dB from 85 Hz to 18 kHz Low frequency extension; –10 dB @ 50 Hz Bandwidth; -6 dB @ 65 Hz and 42 KHz CROSSOVER FREQUENCIES Monopole mode; 2-way, high-order, in-phase @ 2.5 kHz Dipole mode; 2-way, high-order @ 250 Hz FINISHES Black NOMINAL IMPEDANCE Monopole mode; 6 ½ (nominal), 3 ½ (minimum) @ 3.6 kHz Dipole mode; 6 ½ (nominal), 3 ½ (minimum) @ 355 Hz SENSITIVITY 90 dB SPL, with 2.83 V rms @ 1 m (2 pi anechoic) WEIGHT 36 lb (16 kg) per pair net (without packing) DEPTH 8 3⁄8" (21.2 cm) WIDTH 14 3⁄16" (36 cm) HEIGHT 12 1⁄2" (31.7 cm) Learn More
    $799.00

  • Revel Voice Center Speaker

    Revel Voice Center Speaker

    Revel Voice Center Speaker Voice The role of the center channel loudspeaker is to provide the acoustical “anchor” to the onscreen dialog, music, and sound effects, and to match the sound quality of the left and right front loudspeakers. Seems simple enough, until you consider that home theater systems vary widely in where and how the center channel speaker is physically placed. Front projection systems might have the center speaker placed below or even behind the screen, while other installations might find the center speaker flush-mounted in the wall or placed above the video monitor. As each different placement option affects the resulting sound quality, obtaining a correct acoustical match with the left and right front speakers in every instance becomes difficult, if not impossible. Unless the three front speakers have very similar tonal balances, achieving a smooth, accurate and even blend across the entire front soundstage just isn’t achievable. The Voice is the first center channel speaker designed specifically to address this problem. Featuring two 8-inch inverted dome woofers and one 4-inch inverted dome midrange, along with a 1.1-inch dome tweeter, the Voice provides a uniform, timbre-matched dispersion that covers a wide audience listening area. Three different boundary compensation adjustments are provided to allow correct timbral balance for virtually any placement possibility. With the Voice, the correct tonal balance between all three front speakers can be evenly matched in any home theater setup, resulting in dramatically improved soundstaging and imaging accuracy. As with all Ultima range speakers, these proprietary drivers are specially designed for incredible dynamic range capability, preventing dynamic compression from altering the timbral balance during musical crescendo peaks and explosive movie soundtracks. 87dB SPL, with 2.83V rms @ 1m (4 pi anechoic) Impedance: 6Ω (nominal), 4Ω (minimum) @ –12˚ phase angle Maximum phase angle = 28˚ @ 892Hz Minimum phase angle = –35˚ @ 3kHz Filters (crossover): 3-way, 24dB per octave, (4th order) acoustic response at 300Hz and 2.2kHz Frequency responses: In-room response; ±1.0dB from 110Hz to 8kHz In-room response relative to target response; ±0.75dB from 70Hz to 20kHz First reflections response; ±1.0dB from 110Hz to 6.5kHz Listening window response; ± 1.5dB from 100Hz to 8kHz Low-frequency extension; –10dB @ 43Hz –3dB @ 67Hz Dimensions: With pedestal (optional) width: 29.5" (74.6cm) (includes pedestal/feet) height: 27.81" (71cm) depth: 10.937" (27.8cm) Spikes add .875" (2.2cm) to height Without pedestal width: 29.5" (74.6cm) (includes feet) height: 12.5" (31.3cm) (includes feet) depth: 12.375" (31.9cm) (includes grille) Weight: With pedestal 138lb (33kg) net (without packing) Without pedestal 73lb (00kg) net (without packing) Specifications are subject to change Learn More
    $1,500.00

  • Velodyne SMS-1  sold

    Velodyne SMS-1 sold

    Velodyne SMS-1 Subwoofer Management System SOLD Specifications: · Operating Frequency Range: 15 Hz - 200 Hz · THD: < 1% · Digital Phase: 0° to 180° (variable in 15° increments) · High-Pass Crossover: 80 Hz (6 dB/octave slope) · Low Pass Crossover: 15 Hz - 199 Hz (adjustable) 6 dB/octave initial, to 48 dB/octave ultimate · Subsonic Filter: 15 Hz - 35 Hz (adjustable) 12 dB/octave initial, to 48 dB/octave ultimate · Polarity: Adjustable (+/-) · Auto On/Off: Yes · Inputs: Balanced (XLR), Line-level (RCA), Speaker-level · EQ Outputs: Line-level (RCA), Balanced (XLR) · Other Outputs: Thru-put (RCA), High-Pass (RCA) (fixed at 80 Hz) · Crossover Bypass: Yes · Dimensions: 2.0" H x 16.5" W x 6.5" D · Weight: 17 Pounds · MSRP: $749 USA Learn More
    $429.00

  • B&W Nautilus SCM-1 Speakers Pair

    B&W Nautilus SCM-1 Speakers Pair

    B&W Nautilus SCM-1 Speakers Pair - Cherry Finish 2-way vented-box system Frequency Response: 80Hz - 20kHz ± 2dB Sensitivity: 89dB spl Crossover: Frequency 4kHz Learn More
    $1,399.00

  • B&W HTM-2 Center Channel Speaker

    B&W HTM-2 Center Channel Speaker

    B&W HTM-2 Center Channel Speaker- Ash Black B&W Nautilus HTM2 Center Channel Speaker One 1" Metal Dome Tweeter, One 6 1/2" Kevlar Min-Bass Driver, Ported Enclosure Impedance: 8 Ohms Nominal MFR: 56 Hz - 20 kHz ± 2 dB Dimensions: 11" H x 19" W x 11 1/4" D Weight: 21 Pounds Learn More
    $695.00

  • Thiel CS 3-6 Loudspeakers

    Thiel CS 3-6 Loudspeakers

    Thiel CS 3.6 Loudspeakers Amberwood Thiel CS3.6: Three-way, passive radiator-loaded (reflex), floorstanding loudspeaker. Driver complement: 10" woofer, 10" passive radiator, 4.5" cone midrange, 1" metal-dome tweeter. Crossover frequencies: 500Hz, 3kHz. Crossover slopes: first-order (6dB/octave). Time response: 150µs, -20dB. Amplitude response: 27Hz-22kHz ±3dB, 29Hz-20kHz ±1.5dB. Phase response: minimum ±10 degrees. Sensitivity: 86dB/W/m (2.8V). Nominal impedance: 4 ohms (2.5 ohms minimum). Recommended amplifier power: 100-500W. Dimensions: 12.5" W by 48.5" H by 17" D. Weight: 107 lbs each Learn More
    $1,500.00

  • Sunfire True Subwoofer MK II just serviced

    Sunfire True Subwoofer MK II just serviced

    Sunfire True Subwoofer MKII just recapped Sunfire Background Bob Carver, the man behind the success of Phase Linear and Carver Corporation is the mastermind behind this subwoofer-that-could. The son of an engineer and concert pianist, Bob Carver was predestined to become one of the major pioneers of the high end audio industry. He introduced the legendary solid-state Phase Linear 700 amplifier in the mid-seventies, one of the first truly high powered consumer amplifiers. Sunfire Corporation was founded in 1994, Carver's third company, and once again he is breaking new ground. The first product off the blocks was the Sunfire amplifier, which followed in the Carver tradition of big power. The distinctive technical aspect of the Sunfire amplifier is its tracking down converter, or tracking power supply, which monitors the signal, and supplies the necessary power to the output devices as demanded by the signal. According to Carver this design allows the amplifier to deliver more power and current, efficiently. Incorporating the tracking down converter, the Sunfire True Subwoofer has the distinction of being the smallest, most powerful subwoofer in the market today. Sunfire True Subwoofer Design The Sunfire True Subwoofer is housed in an 11" cube, powered by a built-in 2,700 watt amplifier with two 8" drivers on either side of the enclosure. It is rated flat down to 18 Hz, reproducing ultra low bass frequencies at 110 dB SPL. To have deep bass and lot's of it, you must move a tremendous amount of air. Air movement is measured in cubic inches. The more cubic inches of air that is displaced the more bass you can produce. For wall rattling and floor shaking bass you need to displace at least 135 inches of air. Sunfire's push-pull design allows the Sunfire True Subwoofer to displace 251 cubic inches of air! For comparison, your average fifteen inch woofer only displaces 66 cubic inches of air. The dual driver design also cancels the internal forces of such a powerful amp, preventing it from hopping around the room. If you want all the details on how the Sunfire True Subwoofer achieves what seems to be the impossible at first glance, take a look at their white paper which can be found at http://www.sunfire.com. The Sunfire crossover is variable from 40 Hz to 120 Hz with a slope of 36 dB per octave. There is an input level control with continuously adjustable phase and a passive 70 Hz, 6 dB per octave hi-pass line level output for satellite loudspeakers. The input coupling is optical and accepts standard and high level inputs. Learn More
    $639.00

  • Sunfire True Subwoofer
    $599.00

  • Infinity Prelude MTS Speakers

    Infinity Prelude MTS Speakers

    Infinity Prelude MTS Speakers Description: Modular four-way moving-coil loudspeaker (three-way tower with powered subwoofer). Prelude MTS tower: Drive-units (all ceramic-aluminum matrix): 1" dome tweeter, 3*"-cone midrange, four 5*"-cone midbass. Crossovers: 300Hz, 2kHz, 24dB/octave. Frequency response: 80Hz-22kHz, ±3dB; 100Hz-20kHz, ±1.5dB. Nominal impedance: 4 ohms, ±1dB. Sensitivity: 90dB/2.83V/1m. Power requirements: 25-500W. Dimensions: 37" H by 6*" W by 7*" D. Weight: 32 lbs. Prelude MTS powered subwoofer: Drive-unit: 12"-cone ceramic-aluminum matrix. Maximum amplifier output: 850W continuous, 2600W peak (into 8 ohms, 20-100Hz, <0.1% THD). Frequency response: 23-80Hz, ±3dB; 30-80Hz, ±1.5dB. Crossover frequency: 80Hz. Dimensions: 20" H by 9*" W by 20*" D. Weight: 60 lbs. Prelude MTS System: Frequency responses: 23Hz-22kHz, ±3dB; 30Hz-20kHz, ±1.5dB. Impedance: 4 ohms, ±1dB. Sensitivity: 90dB/2.83V/1m. Recommended amplifier power: 25-500W. Second- and third-order harmonic distortion: 20Hz-20kHz at 95dB SPL, ±1%. Crossover frequencies: 80Hz, 300Hz, 2kHz, 24dB/octave. Learn More
    $3,500.00

  • Meridian D2500 subwoofer

    Meridian D2500 subwoofer

    Meridian D2500 subwoofer The Meridian D2500 is big brother to the D1500 - the worlds First Digital Active Subwoofer. This 200-Watt design uses dual 250mm drivers to provide more of the same extreme deep, clear and controlled bass that the D1500 is known for. It too employs 96kHz/ 24bit digital to analogue conversion and accepts digital inputs up to 96kHz including those carrying MHR signals. Separate analogue and digital power supplies are used to feed the D2500’s precision electronic circuits ensuring that both high and low power sections receive continually smooth supply. Fully shielded for use close to monitors and televisions Meridian subwoofers are constructed from 22mm MDF The input and output connectors on the back panel of the D2500 allow it to be easily daisy chained should you require multiple subwoofers. It also features Meridian Comms connections so as when installed in a Meridian Digital Theatre it works seamlessly with other Meridian products. . Technical Specification Performance: Frequency response within 3dB from 30Hz to 400Hz (Bypass) Switchable 2nd order Butterworth crossover with settings for Flat, DSP5000 compatible or DSP33/ M33 compatible Output >110dB spl @ 1m Noise and Hum <-72dBm Distortion <0.1%, typically less than 0,02% up to full power at all relevant frequencies Inputs: Two cable digital inputs, 75Ù, up to 96kHz, PCM or MHR encoding Construction: Acoustic-suspension digital active loudspeaker Two 250mm high-efficiency long-throw custom driver Veneered MDF braced and damped, in black with 6mm annealed plate glass top Supplied with castors and spikes Complementary high-efficiency bipolar design, with outputstage error correction and twin feedback loop 200W mean power continuous Optimised magnetic design Dimensions: 788mm (31.1in) W, 416 (16.4) H, 440 (weight is 62kg) Learn More
    $1,800.00

  • Sonus Faber Liuto Speakers

    Sonus Faber Liuto Speakers

    Type: Three-way vented box Drivers: 1" fabric dome tweeter, polypropylene/textile 6" mid, 9" aluminum/magnesium alloy woofer Frequency response:40Hz–25kHz Sensitivity: 89dB Impedance: 8 ohm Dimensions: 40.6" x 9.3" x 16.25" Weight: 66 lbs. Retail 6000 a pair Learn More
    $3,300.00

  • Audio Physic Yara Evolution Bookshelf Speakers-Pair

    Audio Physic Yara Evolution Bookshelf Speakers-Pair

    Audio Physic Yara Evolution Bookshelf Speakers-Pair impedance: 4 Ohm Frequency range: 55 Hz - 40 kHz Sensitivity: 88 dB Height: 400 mm / 15.8" Width: 180 mm / 6.7" Depth: 220 mm / 8.7" Weight: 7 kg Recommended amplifier power: 20 - 120 W Impedance: 4 Ohm Frequency range: 47 Hz - 33 kHz Sensitivity: 89 dB Learn More
    $599.00

  • Revel S-30 surround speakers

    Revel S-30 surround speakers

    Revel S-30 surround speakers These are black abnd we have the speakers only with this pair no boxes etc. Learn More
    $599.00

  • Wilson Audio MAXX 3 Speakers Obsidian Black

    Wilson Audio MAXX 3 Speakers Obsidian Black

    Wilson Audio MAXX 3 Speakers Obsidian Black, original crates and all. You will get these WilsonFactory Re- Certified unopened, get them in time for the holidays! Learn More
    $28,999.00

Grid  List 

123 Item(s)

per page