High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

Search results for 'krell'

Grid  List 

98 Item(s)

per page
  • Krell (all models)

    Krell (all models)

    We are authorized dealers for all Krell products. Please inquire about any product. Learn More
    $999,999.99

  • Krell Modulari Duo Reference

    Krell Modulari Duo Reference

    Krell Modulari Duo Reference, factory one year warranty Learn More
    $25,000.00

  • Krell Master Reference Subwoofer

    Krell Master Reference Subwoofer

    Krell Master Reference Subwoofer.. These retailed for $40,000. The Master Reference Subwoofer (MRS) is all Krell, hugely powerful, all aluminum, and as heavy as a boulder. Capable of a manufacturer-rated 120dB at 20Hz, the MRS has enough output for huge spaces. The MRS has a 2600W amplifier based on the Krell FPB-750 that powers the two 15" drivers (each capable of 3" excursion), while the cabinet is constructed from 1" aluminum side panels and 2" baffles. The crossover electronics are even housed in their own metal case for isolation from the woofers. Original retail price: $28,000-$40,000. Shipping weight: 480 lbs. Buyer pays freight cost, please send your post code for an accurate quote. Worldwide voltage and shipping available Learn More
    $17,500.00

  • Krell Illusion Inquire for price

    Krell Illusion Inquire for price

    Krell Illusion Circuitry Highlights The Illusion preamplifier is a dual monaural circuit design with the left and right channels afforded their own power supply regulation and individual full chassis sized boards. All signal gain is realized in surface mount topology using proprietary multiple-output current mirrors with nearly 500 times the open loop linearity of other designs 1.5 MHz open loop bandwidth in a zero feedback, balanced, Krell Current Mode design terminating in Krell CAST. A complete Krell system (source, preamp, and amplifier) system, connected using CAST interconnects reduces the number of voltage gain stages to the minimum, one. The resulting noise floor approaches the theoretical limit of technology. Negative feedback is not used anywhere in the preamp, nor is it necessary. Open-loop distortion is typically less than 0.003%. The volume control is realized with a balanced resistor ladder — bandwidth and transient response of the preamp circuitry are virtually unaffected by the volume setting. Power Supply Highlights The Illusion audio circuits receive power from a Krell Current Mode analog power supply housed in its own dedicated chassis. The power supply avoids the common integrated circuit topology used in many preamplifiers and instead mimics the design topology of Krell Evolution e Series amplifiers. The circuitry is completely discrete giving it the ability to respond quickly to current demands and also be unaffected by all but the most severe AC voltage power fluctuations. Oversized for a preamplifier, the power supply features a 290 VA transformer and 41,600µF of capacitance. Locating the power supply in its own chassis presents the ideal configuration for isolating stray electrical and magnetic interference from the critical preamplifier signal path. Capable of delivering current and voltage swing for any musical event, the Illusion power supply is gentle on AC requirements when not in use. A new eco-friendly design reduces standby power draw to 2W. Inputs 2 pr. CAST via 4-pin bayonet connectors 2 pr. balanced via XLR connectors 3 pr. single-ended via RCA connectors Tape input 1 pr. single-ended via RCA connector Main outputs 2 pr. CAST via 4-pin bayonet connectors 1 pr. balanced via XLR connector 1 pr. single-ended via RCA connector Download the "Quick Set-up Guide" Subwoofer outputs 1 pr. balanced via XLR connector 1 pr. single-ended via RCA connector Tape outputs 1 pr. single-ended via RCA connector,buffered Control inputs 1 RS-232 input via a 9-pin D-subminiature connector 1 remote IR detector input via a 3-conductor 3.5 mm connector 1 12 VDC trigger input via 3.5 mm connector 1 preamplifier link via an RJ-45 connector Control outputs 2 individually programmable 12 VDC trigger outputs via 3.5 mm connectors 1 preamplifier link via an RJ-45 connector Power output 1 phone power output (±20 VDC) for KPE via a 9-pin D-subminiature connector Input impedance CAST: 25 Ohms Balanced: 40 k Ohms Single-ended: 20 k Ohms Output impedance CAST: >1 MΩ Balanced: 250Ω Single-ended: 125Ω Gain 12 dB (CAST or balanced output) 6 dB (single-ended output) Volume control Balanced, current-mode, 16-bit, discrete R-2R ladder Input overload Balanced, current-mode, 16-bit, discrete R-2R ladder Output overload CAST: 16 rnA RMS Balanced: 16 V RMS Single-ended: 8 V RMS Frequency response 20 Hz to 20 kHz ± 0.02 dB 0.35 Hz to 720 KHz +0, -3 dB Single-ended: 8 V RMS Total harmonic distortion plus noise Balanced Output: <0.003%, 20 Hz to 20 kHz, 4 V RMS or 4mARMS Signal-to-noise ratio 4 V RMS balanced or 4 mA RMS CAST output Wideband, unweighted: >100 dB "N' weighted: >109 dB Power consumption Standby: 60 W Power on: 65 W Power on, with KPE: 75 W Dimensions Preamplifier only: 17.3 in.W x 3.8 in. H x 18.3 in. D 43.8 em W x 9.7 em H x 46.4 em D Power supply only: 17.3 in. W x 3.8 in. H x 17.7 in. D 43.8 em W x 9.7 em H x 44.8 em D Preamplifier and power supply: 17.3 in. W x 7.6 in. H x 18.3 in. D 43.8 em W x 19.2 em H x 46.4 em D Weight Shipped: 61 lbs., 27.6 kg Preamplifier only: 18 lbs., 8.1 kg Power supply only: 28 lbs., 12.7 kg Learn More
    $15,000.00

  • Krell Solo 575 used

    Krell Solo 575 used

    Krell Solo 575. Will be upgraded to XD version shipping price is for each box, there are 2 monos Learn More
    $13,500.00

  • Krell S1200U3D

    Krell S1200U3D

    Krell S1200U3D S-1200 3D / S-1200u 3D Surround Processor Coupling legendary Krell preamplifier technology, S-1200 Signal to Noise Ratio "A" Weighted 96 dB Total Harmonic Distortion (THD) Unweighted 20 Hz-20 kHz, +0, - 0.5 dB Inputs Analog Audio (1) Pair Balanced via XLR connectors (5) Pairs Single-ended via RCA connectors (1) Discrete 7.1 via RCA connectors (1) Tape in via RCA connectors (1) VCR audio in via RCA connectors Digital Audio (4) HDMI via HDMI connectors (4) EIAJ optical via Toslink connectors (4) Coaxial via RCA connectors Digital Video (4) HDMI via HDMI connectors Analog Video (3) Component Video via RCA connectors (4) S-video via DIN connectors (3) Composite Video via RCA connectors Outputs Analog Audio (8) Balanced via XLR Connectors R, L, C, SR, SL, SBR, SBL, SUB (8) Single-ended via RCA Connectors R, L, C, SR, SL, SBR, SBL, SUB (1) Tape out via RCA connectors (1) VCR audio out via RCA connectors Digital Audio (1) EIAJ optical via TosLink connector (1) Coaxial via RCA connector Digital Video (1) HDMI via HDMI connector Analog Video (1) Component Video via RCA connectors (1) S-video via DIN connectors (1) Composite Video via RCA connector Control (1) IR Receiver for Remote Control (1) RS-232 via DB9 Female Connector Straight Wired (1) RC-5 via 1/8" stereo "trs" Receptacle (1) 12vdc Remote Trigger Input via 1/8" Mono receptacle (4) 12vdc Remote Trigger Outputs via 1/8 Mono receptacles Digital Decoding Modes Dolby True HD Dolby Digital Plus Dolby Digital 5.1 Dolby Digital EX Dolby Pro Logic IIX DTS Master Audio DTS High Resolution Audio DTS 5.1 DTS ES Discrete 6.1 DTS ES Matrix 6.1 DTS Neo:6 PCM 5.1 PCM 7.1 PREAMP (Direct Analog Only) PREAMP 5.1 (Direct Analog Only) Surround Enhancement Modes General Admission Front Row On Stage Enhanced Stereo Orchestra Mezzanine Full Range + Sub Monophonic Party RS-232 DB9 pin out 1. Data Carrier Detect 2. Received Data 3. Transmitted Data 4. Data Terminal Ready 5. Signal Ground 6. Data Set Ready 7. Request To Send 8. Clear To Send RC-5 pin out Tip = RC-5 data, Ring = +5 V, Sleeve = GND XLR pin out Pin 1 (ground) Pin 2 (non-inverting "Hot") Pin 3 (Inverting) Maximum Input Balanced 8.2 Vrms Single Ended 4.1 Vrms Maximum Output Balanced 14.6 Vrms Single Ended 7.3 Vrms Audio Input Impedance Balanced 51K Ω Single Ended 47K Ω Audio Output Impedance Balanced 160 Ω Single Ended 160 Ω Power Consumption Stand-by TBA Operation TBA Dimensions Inches (L) 17.15 x (W) 17.25 x (H) 5.65 Centimeters (L) 43.56 x (W) 43.82 x (H) 14.35 Weight 18lbs Unit only 8.16kg Unit only 24lbs Shipping Weight 10.89kg Shipping weight Learn More
    $13,500.00

  • Krell Evolution 707 3D factory sealed demo in black only with  warranty    New Krell 4k switcher with HDR available Summer of 2019 for $1000

    Krell Evolution 707 3D factory sealed demo in black only with warranty New Krell 4k switcher with HDR available Summer of 2019 for $1000

    Krell Evolution 707 3D in black latest upgrades, unit is afactory sealed demo. . As we are Krell dealers you will have the balance of warranty which is three years. It can ship from there to you anywhere. The USA retail for this unit is $31500, more internationally World's best sounding surround sound processor (better sound than Krell's best two channel preamp in two channel mode) Fully loaded, international software, will work in any country. Krell is introducing for the 707 a new 4k switcher with HDR available Summer of 2019 for $1000! Learn More
    $13,500.00

  • Krell Trio 300xd

    Krell Trio 300xd

    Krell Trio 300XD TRIO 300 3 Channel Power Amplifier 300 Watt Amplifier Featuring Krell iBias Technology Specifications Frequency response 20 Hz to 20 kHz +0, –0.13 dB <0.5 Hz to 100 kHz +0, –3 dB Signal-to-noise ratio >98 dB, wideband, unweighted, referred to full power output >116 dB, “A”-weighted Gain 26.2 dB Total harmonic distortion <0.045% at 1 kHz, at 300 W, 8 Ω <0.17% at 20 kHz, at 300 W, 8 Ω Input impedance Single-ended: 100 kΩ Balanced: 200 kΩ Input sensitivity Single-ended or balanced: 2.4 V RMS Output power 300 W RMS at 8 Ω 540 W RMS at 4 Ω Output voltage 138 V peak-to-peak 49 V RMS Output current 16 A peak Slew rate 40 V/μs Output impedance <0.017 W, 20 Hz to 20 kHz Damping factor >470, 20 Hz to 20 kHz, referred to 8W Power consumption Standby: 4 W Idle: 200 W Maximum: 2160 W Heat output< Standby: 13.7 BTU/hr. Idle: 800 BTU/hr. Maximum: 7387 BTU/hr. Inputs 3 single-ended via RCA connector 3 balanced via XLR connector Outputs 3 pairs binding posts Dimensions 17.1 in. W x 7.65 in. H x 21.10 in. D 434 mm W x 194 mm H x 536 mm D Weight 100lbs., 45.4 kg (shipping) 85 lbs., Learn More
    $11,500.00

  • Krell Solo 575 New XD version  mono amplifier each   Call for price!

    Krell Solo 575 New XD version mono amplifier each Call for price!

    Krell Solo 575 XD Mono Power Amplifier 575 Watt Amplifier Featuring Krell iBias Technology Circuitry Highlights Krell iBias Class A technology allows our latest amplifiers to run in full Class A mode to full power while minimizing heat generation. All signal gain is realized in the current domain using discrete, proprietary, multiple-output current mirrors with extraordinary open loop linearity. There are no generic integrated circuits or op amps used anywhere. Current mirrors in the final gain stages use a new output power device that operates at a 73% higher voltage, delivers almost 10% more current, and offers 120 watts of additional power handling capability as compared to previous devices. The signal path is fully complementary and balanced . Independent complementary pre driver and driver stages for the positive and negative output transistors make the output stages extremely fast and linear. Krell amplifiers are fully direct-coupled, with no capacitors in the audio signal path. This design gives the Krell amplifiers lower internal impedance, which allows firmer, more precise control of your speakers. Krell CAST Circuitry delivers the purest signal when connected to Krell CAST equipped preamplifiers. Power Supply Highlights Four 750VA toroidal transformers feed amplifier modules that include the audio circuitry, rectifier, and power supply filtering mounted to an individual heat sink. This design shortens the electrical path from the power supply to the output transistors, reducing the overall impedance and allowing the circuit to respond faster and control the speakers better and more accurately. Feature Highlights Network connectivity brings convenience, monitoring, and reporting to end users from any smartphone, tablet, or laptop. Amplifier configuration options include display brightness and timeout. For energy conservation, the amplifiers can be programmed to power off at a preset time of inactivity. Individual channels can be muted and firmware updates can be initiated from the web server. Excessive current, output DC, fan speeds, short circuit, and overheating are all monitored in real time. Messages are displayed on the front panel and reported on the web server interface. Additionally. end users can be sent an email notifying them of any operational anomalies. Learn More
    $11,250.00

  • Krell Modulari Primo with stands
    $10,000.00

  • Krell Duo 300XD

    Krell Duo 300XD

    Krell Duo 300XD Specifications Frequency response 20 Hz to 20 kHz +0, -0.13 dB 0.5 Hz to 100 kHz +0, -3 dB Signal-to-noise ratio >98 dB, wideband, unweighted, referred to full power output >116 dB, "A"-weighted Gain 26.2 dB Total harmonic distortion <0.045% at 1 kHz, at 400 W, 8 Ω <0.17% at 20 kHz, at 400 W, 8 Ω Input Impedance Single-ended: 100 kΩ Balanced: 200 kΩ Input sensitivity Single-ended or balanced: 2.4 V RMS Output power 300 W RMS at 8 Ω 540 W RMS at 4 Ω Output voltage 138 V peak-to-peak 49 V RMS Output current 16 A peak Slew rate 40 V/μs Output impedance <0.017 , 20 Hz to 20 kHz Damping factor >470, 20 Hz to 20 kHz, referred to 8 Ω Power consumption Standby: 4 W Idle: 180 W Maximum: 1600 W Heat output Standby: 13.7 BTU/hr. Idle: 615 BTU/hr. Maximum: 5677 BTU/hr. Inputs 2 single-ended via RCA connector 2 balanced via XLR connector Outputs 2 pairs binding posts Dimensions 17.1 in. W x 7.65 in. H x 21.10in. D 434 mm W x 194 mm H x 536mm D Weight 80 lbs., 3.64 kg (shipping) 70 lbs., 31.8 kg (unit only) Learn More
    $9,500.00

  • Krell Evolution 707 3d Silver, latest factory updates, silver   Factory warranty until the end of 2019  New Krell 4k switcher with HDR available Summer of 2019 for $1000

    Krell Evolution 707 3d Silver, latest factory updates, silver Factory warranty until the end of 2019 New Krell 4k switcher with HDR available Summer of 2019 for $1000

    Krell Evolution 707 3d silver, latest factory updates, we can ship this in your desired voltage, excellent, original packing. One year factory warranty We can have this shipped in your desired voltage worldwide New Krell 4k switcher with HDR available Summer of 2019 for $1000! Learn More
    $9,500.00

  • Krell Solo 375 New XD version  Please phone for price

    Krell Solo 375 New XD version Please phone for price

    Krell Solo 375 XD Price is per mono amplifier Mono Power Amplifier 375 Watt Amplifier Featuring Krell iBias Technology Krell iBias Class A amplifiers are the first to deliver the rich musicality of Class A amplifiers, the uncompromised dynamics of classic Krell amplifiers, and the efficiency and low power consumption of Class G and H amplifiers Circuitry Highlights Krell iBias Class A technology allows our latest amplifiers to run in full Class A mode to full power while minimizing heat generation. All signal gain is realized in the current domain using discrete, proprietary, multiple-output current mirrors with extraordinary open loop linearity. There are no generic integrated circuits or op amps used anywhere. Current mirrors in the final gain stages use a new output power device that operates at a 73% higher voltage, delivers almost 10% more current, and offers 120 watts of additional power handling capability as compared to previous devices. The signal path is fully complementary and balanced . Independent complementary pre driver and driver stages for the positive and negative output transistors make the output stages extremely fast and linear. Krell amplifiers are fully direct-coupled, with no capacitors in the audio signal path. This design gives the Krell amplifiers lower internal impedance, which allows firmer, more precise control of your speakers. Krell CAST Circuitry delivers the purest signal when connected to Krell CAST equipped preamplifiers. Learn More

  • Krell Chorus 5200XD

    Krell Chorus 5200XD

    Krell Chorus 5200XD • 200 Watts into 8 Ohms • 5 ea - Single-ended RCA and Balanced XLR Inputs • 1 RJ 45 Ethernet Port • 1 12V Trigger Input • WBT Speaker Binding Posts • Optional Rack Mount Kit • 17 W, 7 H, 21 D in • 43.3 W, 17.7 H, 53.1 D cm • Weight: 90 lbs, 40 kg DESIGN SPECIFICATIONS Krell® is a registered trademark of Krell Industries, LLC., and is restricted for use by Krell Industries LLC., its subsidiaries, and authorized agents. All other trademarks and trade names are registered to their respective companies. © 2014 by Krell Industries, LLC. All rights reserved. Solo 575 2014 THE LEADER IN AUDIO ENGINEERING Krell Industries, LLC. • 45 Connair Road • Orange, CT 06477-3697 USA Tel: 203-298-4000 • Fax: 203-799-9796 • Sales Fax: 203-891-2028 • contact@krellonline.com • www.krellonline.com All operational features, functions, specifications, and policies are subject to change without notice.e. Krell iBias Class A amplifiers are the first to deliver the rich musicality of Class A amplifiers, the uncompromised dynamics of classic Krell amplifiers, and the efficiency and low power consumption of Class G and H amplifiers. CHORUS 5200 200 WATT 5 Learn More
    $8,500.00

  • Krell Duo 175XD

    Krell Duo 175XD

    Krell Duo 175XD SPECIFICATIONS • 175 Watts into 8 Ohms • 2 ea - Single-ended RCA and Balanced XLR Inputs • 1 RJ 45 Ethernet Port • 1 12V Trigger Input • WBT Speaker Binding Posts • Optional Rack Mount Kit • 17 W, 7 H, 21 D in • 43.3 W, 17.7 H, 53.1 D cm • Weight: 60 lbs, 27 kg Learn More
    $7,500.00

  • Krell Foundation 4K

    Krell Foundation 4K

    Krell Foundation 4K, latest version, new 4K Ultra HD Processor The Foundation 4K UHD adds HDMI 2.0 and HDCP 2.2 technology to the award winning Foundation processor. Designed to be upgradeable, existing Foundation processors can be upgraded to the Foundation 4K UHD platform at the Krell facility. The Foundation 4K UHD updates 4 of the 10 HDMI 1.4a inputs to HDMI 2.0/HDCP 2.2 capability. New on screen display functionality adds status messages including volume, active source, video resolution and audio format. System setup is accomplished from the front panel or a network tablet/computer. Additional functionality has been added to the second HDMI output. The two HDMI video outputs are now independent and can be configured to send different video signals to two individual displays. Both outputs support 4K signals being simultaneously displayed. Both HMDI outputs feature Audio Return Channel (ARC). With ARC, a display device is able to send audio back down the HDMI cable to the Foundation 4K UHD. Televisions with built-in web streaming capability like Netflix or Pandora, can send the audio signal back to the Foundation 4K UHD use the full home theater system instead of just the TV's speakers. Featuring the latest digital connectivity, the Foundation 4K UHD maintains Krell's exacting standards for analog audio reproduction. From decoding the latest lossless audio formats, extensive digital switching, 3DTV pass-through, and more, the Foundation 4K UHD is fully compliant with the digital age. The 7.1-channel processor also features balanced audio outputs, automatic setup and room EQ, and Krell's legendary robust hardware. A slim form factor exudes the Krell aesthetic, while allowing placement in smaller equipment racks. The Foundation 4K UHD features Krell's Automatic Room Equalization System (ARES), to ensure the best possible performance from every theater. ARES analyzes all the speakers in the system, their location, phase, and distance from each other, to determine the best crossover frequency, delay, and more. In addition, ARES incorporates the acoustics of the room to determine unique EQ curves for each of the 7.1 output channels. Unlike other room EQs, ARES can be programmed to only adjust the troublesome low frequencies, leaving high frequencies un Signal to Noise Ratio "A" Weighted 106 dB Total Harmonic Distortion (THD) Unweighted 20 Hz-20 kHz, +0, - 0.003 dB Inputs Analog Audio (1) Pair Balanced via XLR connectors (4) Pairs Single-ended via RCA connectors Digital Audio (10) HDMI via HDMI connectors (9 on rear, 1 on front) (3) EIAJ optical via Toslink connectors (3) Coaxial via RCA connectors Digital Video (10) HDMI via HDMI connectors (9 on rear, 1 on front) Analog Video (3) Component Video via RCA connectors (2) Composite Video via RCA connectors Outputs Analog Audio (9) Balanced via XLR Connectors R, L, C, SR, SL, SBR, SBL, S1, S2 (9) Single-ended via RCA Connectors R, L, C, SR, SL, SBR, SBL, S1, S2 (1) Zone 2 Output (2) Single-ended via RCA connectors Digital Audio (2) HDMI via HDMI connector Digital Video (2) HDMI via HDMI connector Both Include Audio Return Channel Control / Update (1) IR Receiver for Remote Control (1) RS-232 via DB9 Female Connector Straight Wired (1) RC-5 via 1/8" stereo "trs" Receptacle (1) Ethernet via RJ-45 Connector (1) Mini USB used for firmware updates (1) 12vdc Remote Trigger Input via 1/8" Mono receptacle (1) 12vdc Remote Trigger Outputs via 1/8 Mono receptacles Digital Decoding Modes Dolby True HD Dolby Digital Plus Dolby Digital 5.1 Dolby Digital EX Dolby Pro Logic IIX DTS-HD Master Audio DTS-HD High Resolution Audio DTS 5.1 DTS ES Discrete 6.1 DTS ES Matrix 6.1 DTS Neo:6 PCM 5.1 PCM 7.1 Surround Enhancement Modes General Admission Front Row On Stage Enhanced Stereo Orchestra Mezzanine Full Range + Sub Monophonic Party RS-232 DB9 pin out 1. Data Carrier Detect 2. Received Data 3. Transmitted Data 4. Data Terminal Ready 5. Signal Ground 6. Data Set Ready 7. Request To Send 8. Clear To Send 9. Ring Indicator RC-5 pin out Tip = RC-5 data, Ring = +5 V, Sleeve = GND XLR pin out Pin 1 (ground) Pin 2 (non-inverting "Hot") Pin 3 (Inverting) Maximum Input Balanced 6.3 Vrms Single Ended 3.15 Vrms Maximum Output Balanced 16.7 Vrms Single Ended 8.35 Vrms Audio Input Impedance Balanced 58K Ω Single Ended 58K Ω Audio Output Impedance Balanced 100 Ω Single Ended 100 Ω Power Consumption Stand-by 2w Operation 59w Dimensions Inches (L) 16.83 x (W) 17.06 x (H) 3.47 Centimeters (L) 42.76 x (W) 43.33 x (H) 88.1 Weight 18lbs Unit only 8.16kg Unit only 24lbs Shipping Weight Learn More

  • Krell Illusion top of line two piece preamplifier

    Krell Illusion top of line two piece preamplifier

    As new Krell Illusion preamplifier complete with all packing and accessories.. Perfect condition, minimal 3 years use.. Balance of factory warranty applies only to dealers and that is us. Learn More
    $7,400.00

  • Krell Cipher NEW in silver

    Krell Cipher NEW in silver

    This is factory sealed, new with full five year warranty. $12000 USA retail An advanced disc drive and coupled to the latest Krell digital and analog circuitry. the Krell Cipher delivers the ultimate performance from today’s highest resolution source material. Every performance enhancement is incorporated to retrieve the most accirate signal from SACD and CD music titles. Isolatedmechanically from the underlying chassis, the drive mechanism utilizes composite mounts to mini- mize vibration induced errors. Special sound damping material is strategically placed inside the unit to minimize mechanical resonances even further. Krell cus- tomized disc drive firmware enhances reading accuracy, drive mechanics, and operational parameters. As an ultimate final step, the seperate SACD and CD laser heads are individually calibrated by hand for the precise output levels required for reference quality SACD and CD playback. Frequency response 20 Hz to 20 kHz +0.0, -0.5 dB Signal to noise ratio “A” weighted 105 dB THD 20 Hz to 20 kHz, -82 dB Power Consumption 61 W Analog Audio outputs 1 pr. CAST via 4-pin bayonet connectors 1 pr. balanced via XLR connector 6 single-ended via RCA connector Digital Audio outputs 1 S/PDIF via RCA, 1 EIAJ optical via TosLink Remote Control 1 Wireless IR Remote 1 Remote IR sensor input via a 3-conductor 3.5 mm connector Control inputs 1 RS-232 port via a 9-pin D-subminiature connector 1 12 VDC trigger input via 3.5 mm connector 1 Krell CAN Link via an RJ-45 connector Control outputs 1 12 VDC trigger output via 3.5 mm connectors 1 Krell CAN Link via an RJ-45 connector Dimensions 17.3 in. W x 6 in. H x 17.3 in. D 43.8 cm W x 15.3 cm H x 43.8 cm D Weight Shipped: 37 lbs., 16.8 kg Unit only: 29 lbs., 13.2 kg Learn More
    $7,200.00

  • Krell Chorus 7200

    Krell Chorus 7200

    Krell Chorus 7200 Please phone for price CHORUS 7200 7 Channel Power Amplifier 200 Watt Amplifier Featuring Krell iBias Technology Frequency response 20 Hz to 20 kHz +0, –0.08 dB <0.5 Hz to 100 kHz +0, –3 dB Signal-to-noise ratio >95 dB, wideband, unweighted, referred to full power output >115 dB, “A”-weighted Gain 26.2 dB Total harmonic distortion <0.04% at 1 kHz, at 200 W, 8 Ω <0.15% at 20 kHz, at 200 W, 8 Ω Input impedance Single-ended: 100 kΩ Balanced: 200 kΩ Input sensitivity Single-ended or balanced: 1.96 V RMS Output power 200 W RMS at 8 Ω 360 W RMS at 4 Ω Output voltage 113 V peak-to-peak 40 V RMS Output current 13.4 A peak Slew rate 40 V/μs Output impedance <0.038 W, 20 Hz to 20 kHz Damping factor >210, 20 Hz to 20 kHz, referred to 8 W Power consumption Standby: 1 W Idle: 255 W Maximum: 2800 W Heat output< Standby: 3.4 BTU/hr. Idle: 873 BTU/hr. Maximum: 9590 BTU/hr. Inputs 7 single-ended via RCA connector 7 balanced via XLR connector Outputs 7 pairs binding posts Dimensions 17.1 in. W x 7.65 in. H x 21.10 in. D 434 mm W x 194 mm H x 536 mm D Weight 110 lbs., 50 kg (shipping) 100 lbs., 45.4 kg (unit only) Learn More
    $6,999.00

  • Krell Evolution 400 Monos
    $6,999.00

  • Krell Trio 300XD

    Krell Trio 300XD

    Krell Trio 300XD excellent condition, all packing and accessories USA retail is $12650 (we can change this to your desired voltage before shipping) Learn More
    $6,999.00

  • Krell KPS25SC $22500 retail cd player/preamp

    Krell KPS25SC $22500 retail cd player/preamp

    Krell KPS25SC , complete with two remotes, new acrylic top cover, fully recapped in excellent condition Learn More
    $5,999.00

  • Krell EVO 202

    Krell EVO 202

    Krell EVO 202, in silver, six month warranty. Learn More
    $5,999.00

  • Krell KPS25S cd player/preamp fully recapped

    Krell KPS25S cd player/preamp fully recapped

    Krell KPS25S This spectacular cd player and preamp functions like new. Specifications FREQUENCY RESPONSE 0.1 Hz-1 MHz 0,-3 dB REMOTE CONTROL 1 handheld wireless infrared 1 tabletop multi-function wireless infrared TRANSPORT JVC EXU-901A ANALOG INPUTS 1 Pair balanced (via an XLR connector) 4 Pair single-ended (via RCA connectors) ANALOG OUTPUTS 2 3 Pair balanced (via XLR connectors) Pair single-ended (via RCA connectors) DISTORTION 1KHz less than 0.005% THD (balanced) 20KHz less than 0.008% THD (balanced) INPUT IMPEDANCE 98k Ohms OUTPUT IMPEDANCE 17 Ohms OUTPUT VOLTAGE 13 volts R.M.S. (balanced) DIGITAL INPUTS/OUTPUTS 2 EIAJ TM optical (via TosLink connectors) 2 SPDIF coaxial (via RCA connectors) 1 AES/EBU balanced (via an XLR connector) DIMENSIONS 19w x 5.25h x 15.38d in. Pair CAS’I-rM (via a 4-pin bayonet connector) 48.3w x 13.3h x 39.1d cm GAIN 6 dB (single-ended) 12 (balanced) SIGNAL TO NOISE RATIO WEIGHT Shipping 55 Ibs., Unit only 45 Ibs., 25 kg 20.5 kg 97dB (balanced) "A" weighted All operational features, functions, specifications, and Learn More
    $5,999.00

  • Krell Cipher

    Krell Cipher

    Krell Cipher $12000 retail, six month warranty. Original box/remote,everything. Excellent condition All signals are fed into a custom designed Krell anti-jitter module that reduces jitter to a virtually immeasurable level. From there, signals are fed to a 24 bit/192 KHz digital filter and then to a pair of balanced 24-bit/192 kHz digital-to analog converters (DACs). Conventional players use one DAC for both channels and convert the current output of the DACs to voltage, a process that invariably causes signal distortion. Instead, the Cipher uses one DAC per channel and feeds the native balanced current output directly to Krell Current Mode circuitry. Removing the typical current-to-voltage stage found in conventional players eliminates distortions associated with this conversion. Balanced DACs maintain a dual differential balanced signal from the output of the DACs to the output connections. This lowers distortion and improves signal to noise ratio to their maximum levels. Core Krell technologies of discrete, complementary, direct coupled circuitry are employed throughout the surface mount based output stage. Evolution CAST and balanced connections are included for optimal stereo playback. A complete Evolution (source, preamp, amplifier) system, connected in CAST, reduces the number of voltage gain stages to the minimum: one. The resulting noise floor approaches the theoretical limit of technology Outputs are also included for Multichannel SACD playback. The backbone of all audio components is the power supply which is often minimized in lesser players. The Cipher includes independent power supplies for the drive mechanism, digital, and analog sections to maintain signal isolation between these circuit areas. The Cipher's linear power supply is sourced directly from the designs used in Krell Evolution e Series amplifiers. A custom-wound toroidal power transformer, 10 times larger than those found in typical players, provides tremendous current reserves and assures low-noise analog stage operation. Extensive multi-regulation delivers rock-steady power to all gain stages, ensuring maximum dynamic impact that can get muted in players using switching or digital power supplies. Learn More
    $5,999.00

  • Krell Duo 125XD

    Krell Duo 125XD

    Krell Duo 125XD Krell iBias Class A amplifiers are the first to deliver the rich musicality of Class A amplifiers, the uncompromised dynamics of classic Krell amplifiers, and the efficiency and low power consumption of Class G and H amplifiers. Circuitry Highlights Krell iBias Class A technology allows our latest amplifiers to run in full Class A mode to full power while minimizing heat generation. All signal gain is realized in the current domain using discrete, proprietary, multiple-output current mirrors with extraordinary open loop linearity. There are no generic integrated circuits or op amps used anywhere. Current mirrors in the final gain stages use a new output power device that operates at a 73% higher voltage, delivers almost 10% more current, and offers 120 watts of additional power handling capability as compared to previous devices. The signal path is fully complementary and balanced . Independent complementary pre driver and driver stages for the positive and negative output transistors make the output stages extremely fast and linear. Krell amplifiers are fully direct-coupled, with no capacitors in the audio signal path. This design gives the Krell amplifiers lower internal impedance, which allows firmer, more precise control of your speakers. Power Supply Highlights One 750VA toroidal transformer feeds amplifier modules that include the audio circuitry, rectifier, and power supply filtering mounted to an individual heat sink. This design shortens the electrical path from the power supply to the output transistors, reducing the overall impedance and allowing the circuit to respond faster and control the speakers better and more accurately. Feature Highlights Network connectivity brings convenience, monitoring, and reporting to end users from any smartphone, tablet, or laptop. Amplifier configuration options include display brightness and timeout. For energy conservation, the amplifiers can be programmed to power off at a preset time of inactivity. Individual channels can be muted and firmware updates can be initiated from the web server. Excessive current, output DC, fan speeds, short circuit, and overheating are all monitored in real time. Messages are displayed on the front panel and reported on the web server interface. Additionally. end users can be sent an email notifying them of any operational anomalies. • 125 Watts into 8 Ohms • 2 ea - Single-ended RCA and Balanced XLR Inputs • 1 RJ 45 Ethernet Port • 1 12V Trigger Input • WBT Speaker Binding Posts • Optional Rack Mount Kit • 17 W, 7 H, 21 D in • 43.3 W, 17.7 H, 53.1 D cm • Weight: 53 lbs, 24 kg Learn More
    $5,500.00

  • Krell FPB250MC mono pair

    Krell FPB250MC mono pair

    Krell FPB250MC, excellent like new cosmetics Recapped! shipping price will be twice the shipping charge (or less) at online checkout. email for an accurate quote. Power output: 250W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Gain: 26.4 dB Input sensitivity: 2.14V Signal to noise ratio: 114dB Dimensions: 318 x 267 x 406mm Weight: 31kg Learn More
    $5,500.00

  • Krell Chorus 5200

    Krell Chorus 5200

    Latest model. Exchanged for 7200, like new condition $8500 retail Learn More
    $5,300.00

  • Krell Duo XD

    Krell Duo XD

    Krell Duo XD, factory sealed upgrade, Learn More
    $5,250.00

  • Krell FPB600

    Krell FPB600

    Krell FPB600 recapped in 2014 by the factory, original box/packing Learn More
    $5,000.00

  • Krell Illusion II

    Krell Illusion II

    Krell Illusion II Analog Inputs 2 pr. balanced via XLR connectors 3 pr. singleended via RCA connectors Digital Inputs 1 AES/EBU via XLR connector 2 coaxial via RCA connectors 2 optical via Toslink connectors Main outputs 1 balanced via XLR connectors 1 pr. single]ended via RCA connectors Download the "Quick Set-up Guide" Headphone output 1 via 3-conductor 6.35 mm (1/4 inch) connector Control inputs 1 RS-232 input via a 9-pin D-subminiature connector 1 remote IR detector input via a 3-conductor 3.5 mm connector 1 12 VDC trigger input via 2-conductor 3.5 mm connector Control outputs 2 individually programmable 12 VDC trigger outputs via 2-conductor 3.5mm connectors (30 mA maximum per output) Learn More
    $4,999.00

  • Krell Evolution 302

    Krell Evolution 302

    small profile package utilizing huge internal heat sinks to support Class A, balanced, and Krell Current ModeTM topology • Evolution CASTTM, voltage balanced, and singleended inputs. Evolution CAST, which stands for Current Audio Signal Transmission, is a proprietary method of sending the audio signal between components in the current domain, from a high impedance transmitter to a low impedance receiver. Krell components connected in Evolution CAST act together as an electrically unified whole, free from the deleterious effects normally inherent in connecting cables operating in the voltage domain. • Low feedback topology; only 8 dB of nested local feedback utilized. No global feedback is used. • Push-pull output stage with 10 pair of ultra high speed, high current, output transistors• Push-pull driver stage configuration resembling a miniature output stage This unique circuit actually powers the speaker load when the audio signal is at the zero-crossing point. Notch distortion is effectively eliminated, maintaining the benefits of Class A operation with the efficiency of an A/B design. • Massive 3 kW torroidal transformer, four 35 amp bridge rectifiers, and 110,000 microfarads of filter capacitance, ensure ample current under the most demanding circumstances. • A second low current transformer stabilizes voltage for ultra-quiet operation. • Internal high current line conditioning circuitry filters RF noise on the AC Mains and compensates for asymmetric power waveforms and DC on the AC Mains. Protection circuitry continuously monitors all amplifier operations. • 12 V trigger controllable We can Change it to your desire voltage Learn More
    $4,900.00

  • Krell Foundation 4K version

    Krell Foundation 4K version

    The highly acclaimed Krell Foundation 4K uhd surround processor. They retail for $8250, As new. Learn More
    $4,499.00

  • Krell KSA300s

    Krell KSA300s

    Krell KSA300s recapped 8/18 2 available price is for each inquire for trucking rate Learn More
    $3,700.00

  • Krell Phantom III silver

    Krell Phantom III silver

    Krell Phantom III 3 silver , demo, full warranty, never sold , authorized dealers Phantom III Inputs 2 pr. balanced via XLR connectors 3 pr. single-ended via RCA connectors Main Outputs 1 pr. balanced via XLR connector 1 pr. single-ended via RCA connector Headphone Output 1 via 3-conductor 6.35 mm (1.14 inch) Control Inputs 1 RS-232 input via a 9-pin D-subminiature connector 1 remote IR detector input via a 3-conductor 3.5 mm connector 1 12 VDC trigger input via 3.5 mm connector Control Outputs 2 individually programmable 12 VDC trigger outputs via 3.5 mm connectors Input Impedance Balanced: 40 k Ohms Single-ended: 20 k Ohms Output Impedance Balanced: 310 Ohms Single-ended: 155 Ohms Headphone <3.0 Ohms Gain Balanced 12 dB Single-ended 6 dB Headphone 5.1 dB with 32 Ohm load Volume Control Current-mode, 12-bit, discrete R-2R ladder Input Overload >7.0 V RMS balanced or single-ended Output Overload Balanced: >16 V RMS Single-ended: >8 V RMS Headphone: >3.0 V RMS, 32 Ohm load Frequency Response 20 Hz to 20 kHz +/- 0.02 dB 0.25 Hz to 1.2 kHz +0, -3 dB Total Harmonic Distortion Plus Noise Balanced Output: <0.003%, 20 Hz to 20 kHz, 4 V RMS or 4 v RMS Signal to Noise Ratio >100 dB Wide band, unweighted >100 dB "A" weighted, both referred to 4 v RMS balanced Power Consumption Standby: <2 W Power on: 40 W Dimensions 17.25 in.W x 3.8 in. H x 18.25 in. D 43.82 cm W x 9.65 cm H x 46.36 cm D Weight Shipped: 38 lbs., 17.2 kg Preamplifier only: 23 lbs., 10.4 kg Learn More
    $3,650.00

  • Krell KCT

    Krell KCT

    Krell KCT, with remote, excellent, recapped in last few years We can ship this in your desired voltage Learn More
    $3,500.00

  • Crystal Cable CrystaConnect Ultra Cast Cables for Krell 1 meter

    Crystal Cable CrystaConnect Ultra Cast Cables for Krell 1 meter

    Crystal Cable CrystaConnect Ultra Cast Cables for Krell set of 1 meter Learn More
    $3,500.00

  • Krell MDA300

    Krell MDA300

    Krell MDA300 These were recapped several years ago.. Legendary amps. A crate or two must be built if shipped., inquire with post code Learn More
    $3,500.00

  • Krell S-1500 7 channel  Freshly recapped, six month warranty

    Krell S-1500 7 channel Freshly recapped, six month warranty

    Krell S-1500 7 channel Freshly recapped, six month warranty, with all updates, silver Excellent cosmetics, looks like new Learn More
    $3,400.00

  • Krell Resolution 2

    Krell Resolution 2

    Krell Resolution 2 in cherry in good condition... Drivers are all perfect. Three pairs available. Many other Resolution speakers available separately. RESOLUTION 2 is a three-way floor standing speaker with two 8" woofers, one 6.5" midrange driver, and a one 1" dual-concentric ring tweeter. A sub-enclosure houses the mid/high frequency drive elements. Krell high-current crossover featuring double-side glass epoxy circuit boards are used throughout.The curvature of the cabinets are designed to increase cabinet rigidity while further reducing internal resonant modes. Enclosure type: Bass Reflex, System Sensitivity: 89 dB SPL (2.83 V 1 M), Nominal impedance: 4 Ohms, Frequency Response: 28-22,000 Hz +/- 3 dB. Dimensions W-11.6", H- 48", D- 19.7". Learn More
    $3,300.00

  • Krell KMA 100 MK 2 monos  (larger version, 95lbs each unboxed

    Krell KMA 100 MK 2 monos (larger version, 95lbs each unboxed

    \Krell KMA 100 MK2 monos, LARGE! 95lbs each uncrated. recapped, biased, legendary class A mono amplifiers legendary class A, these are original pics, the faceplates are aluminum, we will clean them up quite a bit. Learn More
    $3,100.00

  • Krell FPB300

    Krell FPB300

    Krell FPB300 recapped since new, inquire unused since factory serviced Learn More
    $3,000.00

  • Krell Digital Vanguard

    Krell Digital Vanguard

    Krell Digital Vanguard $6000 retail Digital Vanguard Integrated Stereo Amplifier The Digital Vanguard incorporates a 200-watt-per channel amplifier and a Class A preamplifier, enclosed in a chassis that borrows its design and construction from the new Krell Foundation preamp/processor, Connect stream player, Illusion preamp and iBias amplifiers. Digital support has been included with USB, HDMI, coaxial, and optical inputs as well as Ethernet audio and Bluetooth streaming. The Vanguard’s amplifier incorporates a massive power supply with a 750 VA toroidal transformer and 80,000 microfarads of storage capacitance. The tremendous amount of energy on tap provides 200 watts per channel into 8 ohms and 400 watts into 4 ohms. Two quiet, thermostatically controlled fans permit the use of a surprisingly compact chassis. The preamplifier section of the Vanguard borrows its balanced, fully discrete Class A circuit concepts from Krell’s top-of-the-line Illusion preamplifiers. Krell’s Current Mode technology is employed to assure unequaled signal bandwidth, easily enough to handle the latest high-resolution PCM and DSD audio sources without impacting high-frequency response and detail. Packed with many of Krell’s most musical-sounding technologies, the elegant chassis is living-room-friendly. Yet it has enough power to achieve incredible, lifelike dynamics with any speaker. The front-panel menu system provides configuration features such as input naming and input trim. Theater Throughput mode lets the Vanguard serve as the core of a surround-sound system without sacrificing two-channel sound quality. Analog Inputs include three stereo RCA and one stereo balanced XLR. High-quality WBT speaker cable terminals provide a secure, electrically ideal connection. The Vanguard also offers features that make it perfect for custom installation, such as 3.5mm jacks for IR input and 12-volt trigger input and output, as well as optional rack-mount ears. Additionally, the unit can be controlled with home automation systems through its Ethernet connection. A key feature for the Digital Vanguard is its digital module, which includes USB, HDMI inputs and output, coax and optical digital inputs; Ethernet music streaming controlled through dedicated iOS and Android apps; and Bluetooth wireless for convenient streaming from phones, tablets and computers. The Vanguard also offers features that make it perfect for custom installation, such as 3.5mm jacks for IR input and 12-volt trigger input and output, as well as optional rack-mount ears. Additionally, the unit can be controlled with home automation systems or the Krell web server through its Ethernet connection. Digital Vanguard Specifications Inputs 1 pr. balanced via XLR connectors 3 pr. single-ended via RCA connectors 1 HDMI 1 USB Outputs 1 pr. speaker outputs via WBT gold-plated binding posts Control inputs 1 remote IR detector input via 3-conductor 3.5 mm connector 1 12 VDC trigger input via 2-conductor 3.5 mm connector Control output 1 programmable 12 VDC trigger output (300 mA maximum current) via 2-conductor 3.5 mm connector Input impedance Balanced: 95 kΩ Single-ended: 47.5 kΩ Frequency response 20 Hz to 20 kHz +0, –0.01 dB <2 Hz to 150 kHz +0, –3 dB Signal-to-noise ratio >90 dB, wideband, unweighted, at maximum gain, referred to full power output >97 dB, “A”-weighted Gain 48 dB Input sensitivity Single-ended or balanced: 160 mV RMS Total harmonic distortion <0.015% at 1 kHz, at 200 W, 8 Ω load <0.13% at 20 kHz, at 200 W, 8 Ω load Output power 200 W RMS per channel at 8 Ω 400 W RMS per channel at 4 Ω Output voltage 113 V peak to peak 40 V RMS Output current 16 A peak Slew rate 50 V/μs Output impedance <0.066 Ω at 20 Hz <0.075 Ω, 20 Hz to 20 kHz Damping factor >121 at 20 Hz, referred to 8 Ω >106, 20 Hz to 20 kHz, referred to 8 Ω Power consumption Standby: 12 W Idle: 70 W Maximum: 1300 W Heat output Standby: 41 BTU/hr Idle: 239 BTU/hr Maximum: 4436 BTU/hr Dimensions 17.1 in W x 4.15 in H x 17.5 in D 434 mm W x 105 mm H x 445 mm D Weight Unit only: 39 lb [17.7 kg] As shipped: 47 lb [21.3 kg] Digital Module Specs Coaxial and HDMI inputs support PCM up to 24-bit/192kHz. Optical input up to 24-bit/96kHz HDMI inputs support DSD and 4K video content. HDMI output supports Audio Return Channel (ARC) USB and Network streaming support MP3, AAC, WMA, WAV(PCM), FLAC, ALAC up to 192kHz Bluetooth streaming supports A2DP, AVRCP, HFP, HSP Learn More
    $2,999.00

  • Krell S275  in BLACK

    Krell S275 in BLACK

    Krell S275 retail price is $5500 US, we can ship this in any voltage. These have never been sold to a consumer. The S-275 is a flexible design boasting 275 watts/channel in stereo mode. A switch on the rear panel converts the S-275 to a 550 watt mono amplifier. The S-275 is a half wide design allowing two amplifiers to fit in the same space as a normal sized amplifier. In that same space, five S-150m amplifiers can reside as they are only 3.4" wide. FREQUENCY RESPONSE 20 Hz–20 kHz +0 dB, -0.08 dB - Stereo +0 dB, -0.12 dB - Mono SIGNAL-TO-NOISE RATIO “A” weighted 115 dB TOTAL HARMONIC DISTORTION (THD) 1 kHz <0.03% 20 kHz <0.20% GAIN Selectable, 25.8 or 19.8 dB - stereo Selectable, 31.8 or 25.8 dB - mono INPUT SENSITIVITY Selectable, 2.4 V or 4.8 V - stereo Selectable, 1.7 V or 3.4 V - mono INPUT IMPEDANCE 20 kOhms single-ended 20 kOhms balanced OUTPUT IMPEDANCE <0.067 Ohms - stereo <.15 Ohms - mono POWER CONSUMPTION Idle 80 W - stereo, 65 W mono Max. 1,900 W TRANSFORMER 1,650 VA INPUTS 1 pair balanced via XLR connectors Learn More
    $2,600.00

  • Krell FPB200 recapped

    Krell FPB200 recapped

    Krell FPB200 freshly recapped Learn More
    $2,600.00

  • Krell Cast Cable 10 meter

    Krell Cast Cable 10 meter

    Krell Cast Cable 10 meter please inquire for pricing Learn More
    $2,550.00

  • Krell KPS28c

    Krell KPS28c

    Krell KPS28c original box/remote this has been serviced/recapped by Krell approximately one year ago Learn More
    $2,500.00

  • Krell KAV-3250

    Krell KAV-3250

    Krell KAV-3250 original box/packing Learn More
    $2,500.00

  • Krell KRC recapped

    Krell KRC recapped

    Krell KRC two piece $6900 preamplifier with remote and original box/packing, recapped Description: Solid-state remote-controlled preamplifier. Frequency response: 20Hz–20kHz ±0.02dB; 0.2Hz–400kHz +0.0, –3dB. Distortion: <0.01% THD at and 20kHz. S/N ratio: >95dB, unweighted. Input impedance: 47k ohms. Output impedance: 5 ohms. Maximum output voltage: 14V rms. Dimensions: 19" W by 2.75" H by 14.5" D. Weight: 29 lbs (shipping). The KRC is set apart from previous Krell preamps by its remote-control capability. Level, balance, mute, input selection, tape-monitor selection, absolute phase, and gain (the LED-illuminated high position provides an additional 6dB of amplification) are all accessible either from the front panel or from the hefty remote control. The latter also duplicates the bias-level meter on/off controls found on the Krell S-Series power amplifier remotes (footnote 1). The balance "control" provides up to 4dB of attenuation in 1dB steps, or off, for either channel. The volume is controlled via a custom-designed, motor-driven, continuously variable potentiometer. When the volume is operated via the remote, a red LED on the control knob illuminates, so the setting can be seen from across the room. The KRC also provides an unusual degree of input and output protection. Faults are sensed, disabling the offending input or output until the problem is cleared. Problems are indicated by means of flashing input LEDs (for input faults) or a flashing blue pilot-light LED (for output fault) Learn More
    $2,475.00

  • Krell Altair

    Krell Altair

    Krell Altair Reference $5500 low profile amplifier with separate power supply from the 1990's. Original boxes Designed as a reference amplifier for apartment sized systems. Power suppy caps just recapped. Learn More
    $2,370.00

  • Krell MD10

    Krell MD10

    Krell MD10 with remote LASER Single Beam with glass lens OUTPUT Digital only in industry standard SP_DIF format. 1 FIBRE OPTIC via standard intertace 1 COAXIAL via RCA connector 1 AT&T via ST connector 1 AES/EBU via XLR connector 1 SPECIAL Optional TimeSync via ST connector REMOTE CONTROL Wireless infrared DIMENSIONS 19.0" wide, 12.5" deep 6.0" high, cover closed 15.0" hfgh with cover open WEIGHT 20 pounds unit only 34 pounds in box Learn More
    $2,299.00

  • Krell Connect (Digital Version)

    Krell Connect (Digital Version)

    Krell Digital connect. $4000 retail in the USA, more overseas. Connect Stream Player The Krell Connect, the ultimate in high-resolution audio streaming technology. From FLAC to WAV, MP3 and WMA, the Connect plays back up to 192kHz/24-bit audio plus Internet radio, all to Krell's highest fidelity standards. The Wi-Fi equipped Connect is available with a built-in Digital-to-Analog Converter (DAC) module. The DAC-equipped Connect has a 32-bit ESS Sabre chipset with discrete, direct-coupled analog circuitry outputting via RCA or balanced audio outputs. Extensive audio libraries are easy to navigate via the Connect's built-in 3.5-inch QVGA LCD screen. Alternately, a full-featured iOS app offers full control from anywhere in the home. In addition to playback of FLAC and WAV files up to 192kHz/24-bit, the Connect also streams Ogg, WMA, and MP3. Unlike some music streamers, gapless playback is possible, allowing for no breaks between album tracks. Live concert albums, for example, can be played as a seamless, uninterrupted experience Internet radio gets the same conversion as the high-resolution files (on DAC-equipped models), providing the best possible sound quality from on line streaming content. Learn More
    $2,200.00

  • Krell Showcase 7

    Krell Showcase 7

    Krell Showcase 7 seven channel amplifier in black Showcase 7 Showcase 6 Showcase 5 FREQUENCY RESPONSE 20 Hz to 20 kHz 20 Hz to 20 kHz 20 Hz to 20 kHz +0 dB, -0.15 dB +0 dB, -0.15 dB +0 dB, -0.15 dB .2 Hz to 95 kHz .2 Hz to 95 kHz .2 Hz to 95 kHz +0 dB, -3 dB +0 dB, -3 dB +0 dB, -3 dB SIGNAL TO NOISE RATIO >110 dB >110 dB >110 dB “A” WEIGHTED GAIN 26.2 dB 26.2 dB 26.2 dB TOTAL HARMONIC 1 kHz < 0.03% 1 kHz< 0.03% 1 kHz < 0.03% DISTORTION (THD) 20 kHz < 0.20% 20 kHz< 0.20% 20 kHz < 0.20% INPUT IMPEDANCE 45 kOhms 45 kOhms 45 kOhms INPUT SENSITIVITY 1.55 Vrms 1.55 Vrms 1.55 Vrms OUTPUT POWER 8 Ohms 125 W 8 Ohms 125 W 8 Ohms 125 W EACH CHANNEL DRIVEN 4 Ohms 250 W 4 Ohms 250 W 4 Ohms 250 W OUTPUT VOLTAGE Peak to Peak 90 V Peak to Peak 90 V Peak to Peak 90 V RMS 32 V RMS 32 V RMS 32 V POWER CONSUMPTION Stand-by 90 W Stand-by 80 W Stand-by 70 W Idle 150 W Idle 130 W Idle 110 W Max. 1600 W Max. 1400 W Max. 1200 W INPUTS 7 single-ended 6 single-ended 5 single-ended via RCA connectors via RCA connectors via RCA connectors 7 balanced 6 balanced 5 balanced via XLR connectors via XLR connectors via XLR connectors OUTPUTS 7 channels via 5-way 6 channels via 5-way 5 channels via 5-way binding posts binding posts binding posts REMOTE CONNECTORS 12 VDC Out 12 VDC Out 12 VDC Out (12 V trigger) (12 V trigger) (12 V trigger) via a 3.5 mm connector via a 3.5 mm connector via a 3.5 mm connector DIMENSIONS INCHES 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d CENTIMETERS 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d WEIGHT SHIPPING 68 lb., 30.8 kg 66 lb., 29.9 kg 64 lb., 29.0 k Learn More
    $2,100.00

  • Krell KSA100 MK II

    Krell KSA100 MK II

    Krell KSA100 MK II excellent cosmetics, there are some green markings in the picture which were removed. We can ship this in your desired voltage Description provided by highendclassics.com: The Krell KSA-100 Class A poweramplifier was the first stereo amplifier from Krell Audio Industries. At the start of the eighties Connecticut witnessed the birth of another highend audio company within its stateborders: Krell Industies. ‘Class A power to the people’ could have been one of the inspiring thoughts for Daniel D’Agostino chief designer of Krell Industries. Of course there were already some Class A designs in the domain of the power amplifier but most and probably all of them were confined to relatively small powerratings. Even the huge monaural Class A amplifier from Levinson, the ML-2’s, could only muster 30 to 40 Watts of power at 8 Ohms. Other noteworthy low power Class A designs were John Bedini’s 25/25 Class A amp and Jean Hiraga’s ‘Hiraga Classe A’. The only high power Class A amp in those days was a stereo 125 Watt Class A design from the SUMO electric company named ‘The Gold’ designed by James Bongiorno. D’Agostino envisioned and designed an array of high powered Class A amps in which the KSA-100 (abbreviation KSA stands for Krell Stereo Amplifier) was the most powerful stereo amplifier rated at 100 Watts Class A power at 8 Ohms. Technical The KSA-100 is a configuration of two completely separated amps only sharing the same huge chassis. Each amp has its own powersupply (one Avel Lindberg 1250 VA toroidal, two 40,000 uF Sprague or Mallory large cans per channel), driverboard and poweroutputsection. Another so called true dual mono design was the ML-3 from Levinson but this amp was biased in AB mode. To get rid of all the Class A generated heat from the outputsection Krell opted for forced cooling with Papst fans blowing down (the MK II version blew upwards in sync with the natural convection flow of heat) trough circular arranged heatsinks with eight TO3 encased powertransistors per channel attached to it. As a matter of fact the ‘The Gold’ from the SUMO company also used fans to cool down the amp. Using active cooling instead of natural convection kept size and cost in check because huge expansive heatsinks would be needed to drop off the 650 Watts continuous power consumption. Seven years later Krell did make huge convection cooled mono-amps as their reference series (KRS-100 & KRS-200) with the same Class A output but with a significant raise in price and weight compared to the forced cooled versions. Although Krell has always been strongly associated with Class A biasing it’s their ability to drive extremely tough loads, like the renowned amplifier killer the Apogee Scintilla (1 Ohm version) fullrange ribbonspeaker, that really illustrated the kind of DNA a Krell was made of. Only a few other amplifiers in this era, and most of them were amps with low powerratings, could drive speakers at such low impedences. Opening up the “hood ” of the amp gives you a strong visual indication of the ‘brute force’ method used to get an unflappable amp that could drive anything on the market then and today. D’Agostino’s assault on the highend poweramplifier market was very successful worldwide due to these first designs. After Levinson and Threshold, Krell established itself as a strong contender on the highend audio-market. Sound quality This range of first Krell designs redefined the meaning of bass-slam. The KSA-100 sounded much more powerful then it’s relatively modest rating of 100 Watts with acceptable levels of refinement in the middle and high regions of the frequency-spectrum. This stereo-amp is a alround workhouse that was often mated with tube preamplifiers from Audio-Research and Conrad Johnson. Not delicacy and transparancy as the best offerings from Levinson and Threshold but nevertheless highly recommend. Krell KSA-100 Type: 100 Watt class-A stereo power amplifier Introduction: 1981 Discontinued:1987 Power rating (manufacturer) 8 Ohms 100 Watt 4 Ohms 200 Watt 2 Ohms 400 Watt 1 Ohm 800 Watt 0.5 Ohm 1200 Watt Learn More
    $2,100.00

  • Krell Resolution Subwoofer

    Krell Resolution Subwoofer

    local pickup in Florida preferred but can ship, Learn More
    $1,999.00

  • Krell Cast Cable 4 meter

    Krell Cast Cable 4 meter

    Krell Cast Cable 4 meter Please inquire for pricing Learn More
    $1,950.00

  • Krell Resolution 3 in  cherry
    $1,900.00

  • Krell KAV-250A/3  250 watt/channel  3 channels recapped warranty

    Krell KAV-250A/3 250 watt/channel 3 channels recapped warranty

    Krell KAV250-A/3, overhauled, new capacitors so they sound the way they should, 120 day warranty, KAV-250a Stereo Amplifier FREQUENCY RESPONSE SIGNAL TO NOISE RATIO "A" WEIGHTED TOTAL HARMONIC DISTORTION (THD) GAIN INPUT IMPEDANCE INPUT SENSITIVITY OUTPUT VOLTAGE OUTPUT POWER, EACH CHANNEL DRIVEN BRIDGED POWER CONSUMPTION INPUTS OUTPUTS DIMENSIONS WEIGHT 20 Hz to 20 kHz +0 dB, -0.1 dB 0.4 Hz to 170 kHz +0 dB, -3 dB 118dB 1 kHz < 0.06% 20 kHz < 0.25% 26.4 dB 100 kOhms 2.15 Vrms Peak to Peak RMS 8 Ohms 4 Ohms 8 Ohms Idle Max. 138 V 49 V 250 W 500 W 1,000 W 210W 1,850 W 1 pair single-ended via RCA connectors 1 pair balanced via XLR connectors 1 pair amplifier channels via five-way speaker binding posts 19w x 6.3h x 15.3d in. 48.3w x 16h x 38.9d cm Shipping 50 lb., 22.7 kg Unit only 43 lb., 19.5 kg Learn More
    $1,899.00

  • Krell KSA100s  (3 available, price for each)

    Krell KSA100s (3 available, price for each)

    Krell KSA100s (3 available, price for each) Very high build quality.. Learn More
    $1,880.00

  • Krell KBL with internal phono board  recapped
    $1,800.00

  • Krell Resolution Center Channel

    Krell Resolution Center Channel

    The Krell Resolution C Channel loudspeaker features a tweeter that has a dual concentric design, with very well-damped ultrasonic resonance and a response beyond 40 kHz. The 4-inch midrange driver used in the Resolution C features a 1-piece chassis and a 1-piece cone and surround. This type of construction minimizes the resonant properties caused by component part boundaries. The midrange driver in the Resolution Center loudspeaker and the tweeter have an integral sealed-chassis design which isolates these drivers from the main enclosure. Resolution C Loudspeaker Specifications: A three-way center channel loudspeaker with two 8" woofers, one 4" midrange, and one 1" dual-concentric ring tweeter with integral waveguide. A sub-enclosure houses the mid and high frequency drive elements. Krell high current crossover featuring double-sided glass epoxy circuit boards used throughout. Cherry finish. Sensitivity 89 dB SPL (2.83V @ 1 m), 4 Ohm nominal impedance Frequency response 48Hz-22kHz +/- 3dB Dimensions (w x h x d) UNIT ONLY 32.0 x 12.3 x 16.7 in. or 81.3 x 31.2 x 42.4 cm SHIPPING BOX 38.8 x 20.3 x 20.3 in. or 98.6 x 51.4 x 51.4 cm Weight UNIT ONLY 90.0 lb. / 40.7 kg SHIPPED 100.0 lb. / 45.5 kg Read more at http://app.audiogon.com/listings/full-range-krell-resolution-c-center-channel-res-c-2013-03-12-speakers-60010#2r8rHcqxStWtZjMz.99 Learn More
    $1,800.00

  • Krell Cast Cable 3 meter

    Krell Cast Cable 3 meter

    Krell Cast Cable 3 meter please inquire for pricing Learn More
    $1,750.00

  • Krell KAV-500/5

    Krell KAV-500/5

    Krell KAV-500/5 rell KAV-500 Multichannel Amplifier 100 Watts/Channel into 8 Ohms, 200 Watts into 4 Ohms 400 Watts/Channel bridged (2 channels) Mfr FR 20 Hz - 20 kHz ± 0.5 dB THD < 0.03% Input Impedance 100 kOhms Size: 6.25" H x 19" W x 17" D Weight: 47 pounds Price: $4,500 5 Channels ($3,000 2 Channel, $500 Per additional channel) Learn More
    $1,700.00

  • Krell Showcase 5 channel  upgraded in black and maybe silver check

    Krell Showcase 5 channel upgraded in black and maybe silver check

    Krell 5 channel Showcase amplfiier In black, capacitors have been upgraded so this sounds like new and Krell modification performed to eliminate high standby idle (allowing for longer lifespan) performed. Will ship in your desired voltage. Krell box/packing. Excellent condition We are authorized Krell dealers Showcase 7 Showcase 6 Showcase 5 FREQUENCY RESPONSE 20 Hz to 20 kHz 20 Hz to 20 kHz 20 Hz to 20 kHz +0 dB, -0.15 dB +0 dB, -0.15 dB +0 dB, -0.15 dB .2 Hz to 95 kHz .2 Hz to 95 kHz .2 Hz to 95 kHz +0 dB, -3 dB +0 dB, -3 dB +0 dB, -3 dB SIGNAL TO NOISE RATIO >110 dB >110 dB >110 dB “A” WEIGHTED GAIN 26.2 dB 26.2 dB 26.2 dB TOTAL HARMONIC 1 kHz < 0.03% 1 kHz< 0.03% 1 kHz < 0.03% DISTORTION (THD) 20 kHz < 0.20% 20 kHz< 0.20% 20 kHz < 0.20% INPUT IMPEDANCE 45 kOhms 45 kOhms 45 kOhms INPUT SENSITIVITY 1.55 Vrms 1.55 Vrms 1.55 Vrms OUTPUT POWER 8 Ohms 125 W 8 Ohms 125 W 8 Ohms 125 W EACH CHANNEL DRIVEN 4 Ohms 250 W 4 Ohms 250 W 4 Ohms 250 W OUTPUT VOLTAGE Peak to Peak 90 V Peak to Peak 90 V Peak to Peak 90 V RMS 32 V RMS 32 V RMS 32 V POWER CONSUMPTION Stand-by 90 W Stand-by 80 W Stand-by 70 W Idle 150 W Idle 130 W Idle 110 W Max. 1600 W Max. 1400 W Max. 1200 W INPUTS 7 single-ended 6 single-ended 5 single-ended via RCA connectors via RCA connectors via RCA connectors 7 balanced 6 balanced 5 balanced via XLR connectors via XLR connectors via XLR connectors OUTPUTS 7 channels via 5-way 6 channels via 5-way 5 channels via 5-way binding posts binding posts binding posts REMOTE CONNECTORS 12 VDC Out 12 VDC Out 12 VDC Out (12 V trigger) (12 V trigger) (12 V trigger) via a 3.5 mm connector via a 3.5 mm connector via a 3.5 mm connector DIMENSIONS INCHES 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d CENTIMETERS 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d WEIGHT SHIPPING 68 lb., 30.8 kg 66 lb., 29.9 kg 64 lb., 29.0 k Learn More
    $1,699.00

  • Krell Studio 2 digital to analog converter

    Krell Studio 2 digital to analog converter

    Krell Studio 2 Digital to analog converter FREQUENCY RESPONSE -.3 dB@ 20KHz and at 8Hz SIGNAL TO NOISE > 115dB DIGITAL-TO-ANALOG CONVERTER 18 bit PROCESSING 1 Motorola DSP-56001 Upgradable software contained in socketed EPROM. LINEAt~TY + .3dB at -90dB THD +N .0025% -92dB CHANNEL SEPARATION >_ 109dB ANALOG OUTPUT VOLTAGE 2.00 volts DIMENSIONS 19.00" WIDE 12.50" DEEP 2.50" TALL (with feet) SHIPPING WEIGHT 16 pounds Learn More
    $1,650.00

  • Krell S1000 HDMI

    Krell S1000 HDMI

    Krell S1000 with remote, can be voltage converted if needed info from the Krell website: State-of-the-art digital audio chipsets, operating with upsampled 24-bit precision are utilized. • Digital audio formats include Dolby Digital Surround EX, Dolby Digital 5.1, DTS 6.1 ES, DTS 5.1, DTS NEO:6, and Dolby Pro Logic II, in addition to 9 proprietary Krell Music Surround modes. • Krell software provides digitally controlled bass management with user-selectable crossover points, optimizing the system's speaker/subwoofer interface. • Audio decoding is accomplished with 24-bit/192 kHz DACs, for the most accurate analog signal possible. • Krell Current Mode analog circuitry is utilized in the critical preamplifier section, and a fully balanced design delivers the extremely wide bandwidth required for accurate audio reproduction. • An analog preamp mode bypasses all digital circuits, providing the most direct signal path for multi-channel and stereo recordings. The S–1000 has 7 single-ended, 1 balanced, and 1 single-ended multi-channel analog audio inputs, as well as 6 coaxial and 2 optical digital inputs. Both single-ended and balanced analog audio outputs are utilized for all 7.1 channels. • A unique software-based eight-channel digital room equalizer maximizes system performance in any room. For each of four memory settings, the user can program filter type (high-pass, low-pass, notch, peaking, and high/low shelf), frequency, shape, and level for every channel. Each of the four memory settings is assignable to a device. • Video circuitry is fully discrete with a bandwidth of up to 350 MHz, ensuring the integrity of all progressive, high definition component, and HDMI signals. • Inputs and outputs for composite, S-Video, component, and HDMI are supported. • An on-screen display indicates status and facilitates system set-up. Learn More
    $1,599.00

  • Krell Cast Cable 2 meter

    Krell Cast Cable 2 meter

    Krell Cast Cable 2 meter please inquire for pricing Learn More
    $1,550.00

  • Krell DVD Standard with HDMI option

    Krell DVD Standard with HDMI option

    Krell DVD Standard with HDMI option $9500 retail, original box/packing remote DVD Standard DVD player Control ports: RS-232 & RC-5 remote-control inputs, 12V AC out Dimensions: 17.25" x 5.65" x 16.45" (WxHxD) Learn More
    $1,500.00

  • Krell Audio Video Standard originally $13500

    Krell Audio Video Standard originally $13500

    Krell Audio Video Standard, clean, with original large tabletop remote that works all Krell products, worth a few hundred by itself http://krellonline.com/assets/support/AVS_V983_MAN.pdf Learn More
    $1,500.00

  • Krell HTS 7.1 3.7  international version 50/60hz

    Krell HTS 7.1 3.7 international version 50/60hz

    Excellent preamp analogue bypass stage, $8000+ retail, with remote any voltage, in black or silver Learn More
    $1,495.00

  • Krell Nordost Cast MMF 1m
    $1,450.00

  • Krell kav-280 black

    Krell kav-280 black

    Krell kav-280p preamp in black, original box manual remote . The unit is low-slung, but deep (17.25"W x 3"H x 17.25"D), with smoothly rounded corners. Its faceplate is uncluttered, boasting only seven dome-like touch-sensitive buttons (Power, B-1, S-1, S-2, S-3, Tape, and Mute), a 0.5" round IR sensor, a 1.25" x 0.625" display panel (with red characters) and a 1.25" domed electronic-sensing volume control. There are also eight tiny LEDs: one each for the source buttons (also red) and two above the power switch (a blue power on indicator immediately above it and a red one above it to indicate standby mode). From left to right on the back panel are a pair of XLR inputs (B-1), six pairs of RCA inputs (S-1, S-2, S-3, Tape In, Tape Out, Main Out), and a pair of balanced XLR outputs. An RC-5 input, a pair of 12V DC triggers (in and out), and an IEC power socket round out the package. The remote also controls other components in the KAV line, such as the KAV-280cd CD player. The KAV-280p uses surface-mount technology derived from Krell's Current Tunnel technology, as personified by the KCT preamplifier. It's a wide-bandwidth, direct-coupled design that's fully balanced from the inputs to the outputs. That includes the volume control, a really slick digitally controlled resistor-ladder. Learn More
    $1,450.00

  • Krell KAV-500/4

    Krell KAV-500/4

    Krell KAV-500/4 Krell KAV-500 Multichannel Amplifier 100 Watts/Channel into 8 Ohms, 200 Watts into 4 Ohms 400 Watts/Channel bridged (2 channels) Mfr FR 20 Hz - 20 kHz ± 0.5 dB THD < 0.03% Input Impedance 100 kOhms Size: 6.25" H x 19" W x 17" D Weight: 47 pounds Price: $4,500 5 Channels ($3,000 2 Channel, $500 Per additional channel) Learn More
    $1,400.00

  • Krell Cast cable 1 meter

    Krell Cast cable 1 meter

    Krell Cast cable 1 meter Please inquire for pricing Learn More
    $1,400.00

  • Krell KPE reference with power supply

    Krell KPE reference with power supply

    Krell KPE reference with power supply and connecting cable, very low hours, original box/packing ships in any voltage Learn More
    $1,399.00

  • Krell KAV-300 CD

    Krell KAV-300 CD

    Krell KAV-300CD Overhauled 10/18 with new laser, spindle, capacitors, ships in your deisred voltage at no extra charge. with factory remote 6 month warranty. great player for the money. Front-loading CD player. Transport: monolithic assembly featuring full-size clamp. DAC: Burr-Brown PCM1702K, 20-bit. Analog outputs: one pair balanced via XLR, pin 2 noninverting; one pair single-ended via RCA. Digital outputs: one EIAJ optical (TosLink), one S/PDIF coaxial. Frequency response: 20Hz-20kHz, +0.0/-0.18dB. S/N: 103dB, A-weighted. Distortion: 20Hz-16kHz, -87dB; 20kHz, -82dB. Power consumption: 50W. Dimensions: 19" W by 4.6" H by 15" D. Weight: 22 lbs net, 32 lbs shipping. Learn More
    $1,350.00

  • Krell KRX-1 2 or  3 way active crossover

    Krell KRX-1 2 or 3 way active crossover

    Krell KRX-1 2 or 3 way active crossover we can send this in your desired voltage Learn More
    $1,300.00

  • Krell Studio

    Krell Studio

    Krell Studio D/A Coverter serviced 5/19 iinquire for availability before purchasing. 100-240volt Learn More
    $1,299.00

  • B&W John Bowers Signature Line Active Crossover designed by Krell

    B&W John Bowers Signature Line Active Crossover designed by Krell

    John Bowers Signature Line Active Crossover designed by Krell for B&W Learn More
    $1,200.00

  • Krell KAV-280CD

    Krell KAV-280CD

    Krell KAV-280CD excellent condition, We can ship this in your deisred voltage $3250 retail KRELL KAV-280cd SPECIFICATIONS: * FREQUENCY RESPONSE: 20 Hz-20 kHz (+0.0,-0.5 dB) * SIGNAL-TO-NOISE RATIO: "A" weighted 103 dB * TOTAL HARMONIC DISTORTION (THD): 20 Hz-20 kHz -82 dB THD * POWER CONSUMPTION: 45 W * TRANSPORT: A drawer loading, mechanically isolated drive mechanism featuring a linear drive laser assembly * DIGITAL-TO-ANALOG CONVERTERS: 4 Burr-Brown PCM-1704 24-bit devices * ANALOG AUDIO OUTPUTS: … 1 pair balanced via XLR connectors … 1 pair single-ended via RCA connectors * DIGITAL AUDIO OUTPUT: … 1 S/PDIF via RCA connector … 1 EIAJ optical via a TosLink connector * DIMENSIONS: … Width: 17.25” (438mm) … Height: 3.5” (89mm) … Depth: 16.5” (419mm) * WEIGHT: 13.5 lb Learn More
    $1,150.00

  • Krell  DSN-1 digital input switcher

    Krell DSN-1 digital input switcher

    Krell DSN-1 digital input switcher, with original box/packing.... Learn More
    $999.00

  • krell sbp-32x

    krell sbp-32x

    krell sbp-32x just serviced /6/17 90 day warranty Dimensions Weight 19" wide, 14.,2,5" deep,. 2.5 high with feet 26 pounds in shipping carton 22 pounds with Outputs Analog Single ended via RCA Balanced via male XLR Inputs Digital 1 via female RCA connector 1 i~dustry standard fibre optic input auto switching between inputs (defaults to fibre optic) Processors 2 Motorola DSP-56001, one per channel DACs 18 bit, one for each channel, individually trimmed. Software WAVEFORM DUPLICATOR updatable in socketed EPROMs Learn More
    $999.00

  • Krell Vector HC 2 meter 15 amp iec connector

    Krell Vector HC 2 meter 15 amp iec connector

    Krell Vector HC 2 meter 15 amp iec connector 3 available, price is for each as new, original packaging Learn More
    $999.00

  • Krell KAV-150a low profile stereo or mono amplifier

    Krell KAV-150a low profile stereo or mono amplifier

    Krell KAV150a recapped it sounds and work like new. 120 day warranty. Learn More
    $999.00

  • Krell MD2 cd transport

    Krell MD2 cd transport

    Krell transport 2 rca digital out and one toslink out, available 4/19 SPECIFICATIONS TRANSPORT Philips CDM- 1 MK 11 with Hall effect motor, swing-arm design in a unicast frame. LASER Single Beam with glass lens OUTPUT Digital only in industry standard formats 1 FIBRE OPTIC via standard interface 2 COAXIAL via RCA connectors DIMENSIONS 1,9," wide, 12.5" deep 6 ,,high, cover closed 15 tilgh with cover open WEIGHT 23 pounds, unit only 28 pounds, shipping weight Learn More
    $999.00

  • Krell Vector HC Power Cord 20 amp  6' length

    Krell Vector HC Power Cord 20 amp 6' length

    Krell Vector HC Power Cord 20 amp $1900 retail Three available, all with original packing, excellent condition Learn More
    $999.00

  • KRELL SPB 32X digital to analog converter

    KRELL SPB 32X digital to analog converter

    tight sound, any voltage . SPECIFICATIONS Outputs Analog Single ended via RCA Balanced via male XLR Inputs Digital 1 via female RCA connector 1 i~dustry standard fibre optic input auto switching between inputs (defaults to fibre optic) Processors 2 Motorola DSP-56001, one per channel DACs 18 bit, one for each channel, individually trimmed. Software WAVEFORM DUPLICATOR updatable in socketed EPROMs Dimensions Weight 19" wide, 14.,2,5" deep,. 2.5 high with feet 26 pounds in shipping carton Learn More
    $975.00

  • Krell KSL  recapped

    Krell KSL recapped

    Krell KSL balanced and rca line stage preamp, just serviced with new capacitors I will ship this in your voltage Learn More
    $950.00

  • Krell KAV-250p remote controlled

    Krell KAV-250p remote controlled

    Krell KAV-250p remote controlled comes with a remote control, lacks a rotary volume control and uses up/down buttons and LEDs instead, it features three single-ended line inputs and one balanced, a tape loop and provision for both balanced and single-ended outputs. Other niceties include full synergy with RC-5 remote control systems for multi-room compatibility and home theatre products. It takes only a few moments to get used to a preamp devoid of knobs and bearing only push buttons, but I found myself using the remote control nearly all the time. At 483x89x394mm (WHD), the KAV-250p could be mistaken for the '300i, and it stacks perfectly with the '300cd. What distinguishes it visually from the KRC-3 is the lack of a black strip in the middle of the fascia. Other aspects of the KRC-3 which go some way to qualify a higher price tag are polarity inversion lacking on the '250, a (digital) rotary volume control and seemingly more substantial build quality. That aside, the KAV-250p employs Krell's Current Mode Gain Class A, fully complementary circuitry, microprocessor control over level, balance and source switching, dry-contact relays for the input switching and a typically substantial toroidal power supply. Learn More
    $900.00

  • Krell Stealth D/A converter

    Krell Stealth D/A converter

    Krell Stealth D/A converter one owner, original box excellent, ships in your desired voltage SPECIFICATIONS FREQUENCY RESPONSE 20Hz-20KHz +/- ldB SAMPLING FREQUENCY 8 Times over sampling DIGITAL TO ANALOG CONVERTER 18 Bit ANALOG OUTPUT VOLTAGE 2.1 volts R.M.S. DIMENSIONS 19" Wide 12" Deep 2.375" High WEIGHT 13 pounds, unit only 20 pounds, shipping weight Learn More
    $899.00

  • Krell Path Speaker Cable 8' pair

    Krell Path Speaker Cable 8' pair

    Krell Path Speaker Cable 8' pair, price is per pair, two pairs are available Learn More
    $850.00

  • Krell Showcase DVD with HDMI output

    Krell Showcase DVD with HDMI output

    Krell Showcase DVD with HDMI output, we can ship this in your desired voltage in silver or black Mechanically inert platform Highly stable clock reference Wide bandwidth design Outstanding bass weight, midrange articulation, and high frequency extension DAC performance is excellent Learn More
    $850.00

  • Krell Showcase DVD player in silver or black

    Krell Showcase DVD player in silver or black

    Krell Showcase DVD player in silver, used bench tested, with remote. $4500 retail voltage conversion possible for an additional $100 http://www.krellonline.com/pdf/SHCS_DVD_ad.pdf Learn More
    $650.00

  • Krell Showcase surround processor

    Krell Showcase surround processor

    Krell Showcase surround processor, with remote and cord, six month parts and labor or exchange warranty $4500 new Learn More
    $595.00

  • Krell HTS Home Theater Standard 5.1  inquire

    Krell HTS Home Theater Standard 5.1 inquire

    Krell HTS surround processor in Krell gray with remote inquire if still available Learn More
    $580.00

  • Krell Path Speaker Cable

    Krell Path Speaker Cable

    Krell Path Speaker Cable 3' pair (or so) mint We also have 2 pairs of 8' Krell Path speaker cables separately for $850/pr Learn More
    $499.00

  • Krell Klink

    Krell Klink

    Krell Klink rarely available Learn More
    $400.00

  • Krell Trigger Converter 12pin in to 5 pin out

    Krell Trigger Converter 12pin in to 5 pin out

    Krell Trigger Converter 12pin in to 5 pin out Learn More
    $399.00

Grid  List 

98 Item(s)

per page