d/a converters

PS Audio Superlink Digital to analog converter Generation Was $1000 retail Learn More

Nakamichi 1000P Learn More

Wadia 2000 We can ship this in your desired voltage worldwide. with three original wadia conncecting cables Legendary build quality. Learn More

Calyx DAC 24/192 DAC w/ Calyx Linear Power Supply (CLPS) $1950 retail Learn More

Threshold DAC 1/e Learn More

MBL 1511F Learn More

Meridian 203 Digital to analog converter Description: Frequency response: 20Hz–20kHz ±0.2dB. Distortion: <0.004%. Noise: <94dB. Conversion: Bitstream, PDM, differential time-aligned mode, 256x-oversampling, 2 bits, passive filtering. Precision: 16 bits. Source sampling frequency: 32kHz–48kHz. Inputs: IEC958, 75 ohm coaxial, EIAJ optical. Analog Output: RCA jacks, 2V fixed. Output impedance: 12 ohms. Display: Power, Lock, and EQ (de-emphasis) indicators. Dimensions: 6.3" W by 3.9" H by 12.6" D. Weight: 4 lbs. Finish: black textured enamel and glass original retail 999 Learn More

Goldmund Mimesis 10 Learn More

Meta Research by Goldmund DA converter and transport MINT rare in this condition. Learn More

Bluesound Node 2i Black BluOS MQA Roon Ready Hi Res Audio Streamer barely used, customer ordered and switched out for something else after two months. 8 available as of 4/23 includes USA shipping priority mail Learn More

Mark Levinson 360S Learn More

Rega DAC-R with remote Learn More

Goldmund Mimesis 10 dac Learn More

Mark Levinson 333 very nice condition currently in NY 7/24 Description: Solid-state stereo amplifier. Rated output power, 20Hz–20kHz, with no more than 0.5% THD (FTC): 300Wpc minimum continuous into 8 ohms (24.8dBW); 600Wpc minimum continuous into 4 ohms (24.8dBW); 1200Wpc continuous into 2 ohms (24.8dBW). Frequency response: 20Hz–20kHz ±0.05dB. S/N ratio: ᢈdB (ref. 1W). Input impedance: 100k ohms balanced, 50k ohms single-ended. Voltage gain: 26.8dB. Input sensitivity (for 2.8V output): 130mV. Input sensitivity (for full output): 2.25V. Output impedance: <0.05 ohms, 20Hz–20kHz. Damping factor: !w800, 20Hz–20kHz into 8 ohms. Power consumption: typically 350W at idle, 200W in standby. Dimensions: 17.56" (446mm) W × 19.11" (485mm) D × 10.3" (262mm) H. Shipping weight: 146lb (66.4kg). Learn More

krell sbp-32x just serviced /6/17 90 day warranty Dimensions Weight 19" wide, 14.,2,5" deep,. 2.5 high with feet 26 pounds in shipping carton 22 pounds with Outputs Analog Single ended via RCA Balanced via male XLR Inputs Digital 1 via female RCA connector 1 i~dustry standard fibre optic input auto switching between inputs (defaults to fibre optic) Processors 2 Motorola DSP-56001, one per channel DACs 18 bit, one for each channel, individually trimmed. Software WAVEFORM DUPLICATOR updatable in socketed EPROMs Learn More

DCS Debussy original 230V, Description: Multi-input D/A processor with digital volume control and upsampling of CD data to proprietary Ring-DAC format. Digital inputs: 2 S/PDIF, (1 RCA, 1 BNC), 2 AES/EBU, USB. Word clock in on 75-ohm BNC jack. Analog outputs: balanced (XLR), unbalanced (RCA). Maximum output level: 2V or 6V (selectable). Output impedance: 3 ohms balanced, 52 ohms unbalanced. Frequency responses (Sharp filter): 10Hz–20kHz, ±0.1dB (Fs: 44.1 or 48kHz); 10Hz–20kHz, ±0.1dB, –3dB at >38kHz (Fs: 88.2 or 96kHz). Channel separation: >80dB, 20Hz–20kHz. Noise: below–110dB, 20Hz–20kHz. Power consumption: 19W typical, 25W maximum. Dimensions: 17.6" (445mm) W by 2.6" (65mm) H by 15.5" (392mm) D. Weight: 19.4 lbs (8.8kg) Learn More

Z-systems RDP-1 the remote is a little glitchy, Z-Systems rdp-1 digital preamplifier: Digital inputs: 2 AES/EBU, 3 S/PDIF (RCA), 1 optical (TosLink with ST-type glass optional). Digital outputs: 1 AES/EBU, 1 S/PDIF (RCA), 1 optical (TosLink with ST-type glass optional). 24-bit input/output. 32-bit DSP with internal 40-bit floating-point arithmetic, used for all gain and equalization. Dynamic range: >144dB. THD+N: better than -135dB. Number of memories/presets: 99. Gain control: from -95dB to +12dB. Dimensions: 17" W by 4.5" H by 10" D. Weight: 14 Read more at http://www.stereophile.com/content/z-systems-rdp-1-digital-preamplifier-specifications#4xFcik8jfpKPDFKV.99 Learn More

Esoteric N-05 like new, all packing $7500 retail Learn More

Oppo 105D Blu-ray Darbee version, excellent, These have been selling (not asking) for $1500 lately as of 3/22 Learn More

DAC Learn More

The NuWave DAC is an affordable high-end digital to analog processor. Based on our acclaimed PerfectWave series, the NWD accepts inputs from any digital source including USB (up to 192kHz 24 bit asynchronous) from your computer and connects to your system’s preamplifier with either single ended (RCA) or balanced (XLR) connections. Learn More

Digital to Analog Converter Learn More

Parasound Zdac Learn More

Proceed DAP includes att fiberoptic (good for wadia) some scratches on top Learn More

Cambridge Audio DAC Magic Plus Cambridge Audio DAC Magic Upsampling DAC ($299.95) Excellent Condition Learn More

Audio Alchemy DTI Pro Digital Transmission Interface Learn More

Musical Fidelity Tri-Vista 21 Dac , excellent, one owner, original box/manual 24 bit 96/192 switchable Learn More

Meridian Prime Headphone Amplifier / Prime Power Supply Silver AUDIO INPUTS 1x pair Phono (stereo) (A1). Gain 3dB; 1.4Vrms in for 2Vrms out 1x 3.5mm analogue stereo (A2). Gain 12dB; 500mVrms in for 2Vrms out. Analogue inputs overload capability >40dB 1x Asynchronous USB 2.0 interface, 44.1–192kHz ≤24-bit. Jitter <90ps p-p. Apodising filter and upsampling of 44.1/48kHz inputs to 88.2/96kHz MQA decode and render AUDIO OUTPUTS 1x pair phono (stereo) preamp out. Maximum output 3.1Vrms @ 1kHz, THD <0.001% @ 1kHz up to 3V rms. Crosstalk <–70dB @ 1kHz. Output can be disabled via power button 2x 1/4in A-type stereo phone jacks. Maximum output 3Vrms off load, THD <0.002%. Output impedance <100mΩ. Power output 250mW up to 42Ω. Short-circuit protected 1x 3.5mm stereo phone jack. Max output 3Vrms off-load, THD <0.002%. Output impedance 2.2Ω PERFORMANCE Output noise (input A1) < –100dBV CCIR or A weighted Frequency response +0/–1dB DC–70kHz, +0/–3dB DC–200kHz COMPATIBILITY Suitable for impedances in the range 16–1kΩ or more. Suitable for open, closed, in-, on- or over-ear models. Recommended sensitivity >80dBspl/mW or >96dBspl/V CONTROLS Volume with precise tracking, 70dB range Input switch Processing (off/i/ii) Power including rear output mute DIMENSIONS / WEIGHT HEIGHT: 50mm [2.0in] WIDTH: 160mm [6.3in] DEPTH: 150mm [5.9in] WEIGHT: 0.9 kg (2.0 lbs) POWER 12V DC Consumption <0.5W standby <1W in quiescent Learn More

Devialet Expert 130 Pro DAC-Integrated Amplifier The Expert Pro 130 is well above and beyond an ordinary amplifier. In fact Devialet has reinvented and combines all of the key components of an audiophile system (preamplifier, amplifier, DAC, streamer, phono stage) into a single and extremely thin slab. In the 140’s case this has been combined into a stereo amplifier that is fully configuratable and incorporates all of Devialet’s latest technology including ADHV2®, SAM®, AIR®, EVO®, DAC Magic Wire®. The Expert 130 Pro represents the most beautiful gateway into a new kind of audiophile world. It includes all Devialet exclusive technologies as well as major innovations developed for the new Expert Pro range, including distortion performance multiplied by 2 in stereo and an architecture designed to develop towards new uses The performance delivered by Devialet Expert is the best ever measured, under actual usage conditions (Dual-Mono measurement): 0.00025%THD+ noise (harmonic distortion) at full power 0,0001%THD at 10W/6Ω 0.001Ω Output impedance 133 dB Signal-to-noise ratio Finish: Chassis carved out of a single aluminium block Color: Chrome Finish Dimensions: Length: 383mm | Width: 383mm | Height: 40mm Weight: 5.65Kg Installation: Horizontal or vertical installation with automatic tilt detection Power: 2 x 140 Watts RMS @ 6Ω Signal-to-Noise ratio: 140dB THD – 140W/6Ω: 0.0005% / -106dB THD – 10W/6Ω: 0.00025% / -112dB Output impedance: 0,001Ω Damping factor: 8000 Bandwidth: DC-30kHz (-0.1dB), DC-95kHz (-3dB) Phase: 0.4° at 20kHz, 1.8° at 40kHz Thermal Distortion: Below measurement threshold Technologies: ADHV2®, SAM®, AIR®, EVO®, DAC Magic Wire®, RAM® Intelligence 3 x SHARC 400 MHz DSP’s 1 x 16 MHz RISC processor 4 x 40 MHz RISC processors 1 x 64 MHz RISC processor Learn More

Jadis JS2 mk IV current model retail $11500 excellent with all packing in 7/24 Learn More

Lumin T2 The Audiophile Network Music Player Black Like New Condition Original Box And Inserts DSD SUPPORT: Up to DSD512 22.6MHz, 1-bit PCM SUPPORT: Up to 384kHz, 16–32-bit, Stereo ANALOG OUTPUT STAGE: Dual ESS SABRE32 ES9028Pro DAC chips Fully balanced layout with high-quality components Completely redesigned analogue buffer includes audiograde output capacitor and ultra-low-noise and high dynamic range Discreet clock system for precision timing Precision 32-bit internal digital volume UPSAMPLING RATES & BIT DEPTHS: DSD128 upsampling option for all files PCM 384kHz upsampling option for all files DIGITAL OUTPUT STAGE: USB: Native DSD512 support PCM 44.1–384kHz, 16–32-bit, Stereo BNC SPDIF: PCM 44.1kHz–192kHz, 16–24-bit DSD (DoP, DSD over PCM) 2.8MHz, 1-bit POWER SUPPLY: Internal 100–240V AC auto-ranging Low-noise Shielded power supply compartment for reduced interference with delicate electronics APP FEATURES: Native support for TIDAL, MQA, Qobuz and TuneIn Radio. Tidal MQA icons to identify high-res music Qobuz high-res icons to identify high-res music Volume control High-resolution artwork Artwork caching Search Multiple tag handling Composer tag support Album-grouping in playlist Automatic internet links to artists/album/songs Saving and restoring of playlists (including Tidal and Qobuz) SUPPORTED AUDIO FILE FORMATS: DSD Lossless: DSF (DSD), DIFF (DSD), DoP (DSD) PCM Lossless: FLAC, Apple Lossless (ALAC), WAV, AIFF Compressed (lossy) Audio: MP3 MQA Learn More

Krell Reference 64 Digital Processor and Reference 64 Power Supply not working Learn More

Wyred 4 Sound DAC-2 DSD Very Good Condition Black Learn More

Weiss 202 with box Learn More

We can ship this worldwide in any voltage . SPECIFICATIONS Outputs Analog Single ended via RCA Balanced via male XLR Inputs Digital 1 via female RCA connector 1 i~dustry standard fibre optic input auto switching between inputs (defaults to fibre optic) Processors 2 Motorola DSP-56001, one per channel DACs 18 bit, one for each channel, individually trimmed. Software WAVEFORM DUPLICATOR updatable in socketed EPROMs Dimensions Weight 19" wide, 14.,2,5" deep,. 2.5 high with feet 26 pounds in shipping carton Learn More

Audio Processor Specifications: Digital processor, with infra-red remote control, capable of operating in three modes: "Type 0," Digital Control Center with digital source selection and digital volume control (1dB step size); "Type 1," Digital Resolution-Enhancement Device with user-selectable input/output data-word lengths, gain, and dither/noise-shaping (five algorithms available); "Type 2," Digital Mastering/Multimedia Processor. Digital inputs: three electrical S/PDIF (RCA); one S/PDIF optical (TosLink); one AES/EBU (XLR). Digital outputs: one AES/EBU (XLR); one S/PDIF (RCA). Control inputs: Meridian "Comms," RS-232 (9600/8/N/1). Sampling frequencies: 32kHz, 44.1kHz, 48kHz. Internal processing precision: 72-bit using a 24-bit DSP engine. Dimensions: 12.6" W (320mm) by 3.9" H (100mm) by 12.9" D (352mm). Weight: 10 lbs (5kg). Learn More

Audio Research Dac2 recapped/just serviced (expensive black gate filter caps, many improved rectifiers) Frequency response 0.01Hz-20kHz Distortion S/N ratio Phase linearity Channel separation Resolution 20 bits Output impedance Analog outputs Single-ended Balanced Digital outputs TOSLINK Optical (digital pass-through) Digital inputs ST-Standard Fiber Optical TOSLINK Optical Coaxial-AES/EBU Power requirements Other Dimensions 19” (48 cm) W x 5 1/4” (13.4 cm) H (standard rack panel) x 10 1” (26 cm) Learn More

Krell DSN-1 digital input switcher, with original box/packing.... Learn More

Esoteric D-07, original three box Description: Multi-input, two-channel D/A processor , digital-domain volume control, two switch-selectable digital reconstruction filters, and switchable upsampling of PCM data to 2x or 4x PCM or DSD. Digital inputs: 2 S/PDIF (2 RCA, 1 TosLink), 1 AES/EBU, USB 1.1, TTL word clock on 75-ohm BNC jack. Digital output: TTL word clock on BNC jack. Sample rates accepted: 32, 44.1, 48, 88.2, 96, 176.4, and 192kHz (S/PDIF, Optical, and AES/EBU); 32, 44.1, 48, and 96kHz (USB); XLR input can receive DSD data from Esoteric P-05 transport. Analog outputs: balanced (XLR), unbalanced (RCA). Maximum output level: 2.2V into 10k ohms. Output impedance: 100 ohms (per phase) balanced, 100 ohms unbalanced. Frequency range: 5Hz–40kHz. Channel separation: not specified. Signal/noise: 130dB. THD: 0.001% at 1kHz. Power consumption: 7W. Dimensions: 17.4" (442mm) W by 4.75" (103.5mm) H by 13.7" (346mm) D. Weight: 20.9 lbs (9.5kg). Learn More

lector 2.24 Learn More

Sampling 24 bits/ 96 kHz Input connectors AES/EBU, Coax,Optical ST signal tp noise ratio 100db Bandwidth 20 Hz to 20 kHz Output level 2,5 V rms Tubes 2x ECC82 Consumption 22 W Dimensions 45 x 19 x 12 cm Weight 12kg Learn More

Bryston BDP-1 Description: Digital music-file player running modified Linux operating system. File formats accepted: AIFF, FLAC, WAV, MP3, M4A, OGG. Word depths supported: up to 24 bits. Sample rates supported: 44.1–192kHz. Digital input ports: 4 USB 2.0. Digital outputs: S/PDIF (75 ohm BNC, female), AES/EBU (3-pin XLR, female). Control inputs: RS-232 port via 9-pin subminiature connector; two 3.5mm 2-conductor phone jacks for implementing remote 12V power on/off trigger. Output impedance: 75 ohms BNC, 110 ohms AES/EBU. Jitter: master-clock standard deviation, <20 picoseconds, 10Hz–10MHz. Power consumption: 10VA. Supplied accessories: Bryston BR-2 handheld infrared remote control; Web client software for iPhone, iPad, or PC using wireless connection via router. 2GB USB flash drive containing eight 24-bit/96kHz FLAC music files from Chesky Records. Dimensions: 17" (435mm) or 19" (490mm) with rack ears W by 2.75" (70mm) H by 11" (280mm) D. Weight: 12 lbs (5.44kg) net, 15.2 lbs (6.9kg) shipping. Learn More

DCS Scarlatti Stack (4 models) This was owned by the owner of Krell and has theoriginal boxes/packing,remote. Currently set to 110v but we can provide this in any voltage you desire. Inquire about shipping as there are four boxes 2011 vintage 3 in pic plus transport all in original double boxes, excellent. $8000 retail Learn More

Cello Reference Standard D/A in 5/24 excellent condition Learn More

Bryston BDA2 Learn More

Accuphase DP80 & DC-81, one owner since new, original box/packing Just serviced with new belts and lubrication, and two capacitors changed in the DAC's power supply. http://www.accuphase.com/cat/dp-80en.pdf Learn More

Lector Digicode 704 Tube D/A part of a lector set other items listed separately, original packing Learn More

Exogal Comet like new, reviews: http://www.tonepublications.com/review/exogals-comet-plus-dac/ http://www.theabsolutesound.com/articles/exogal-comet-digital-to-analog-converter https://www.audio-activity.com/exogal-comet-plus-en.html Learn More

Krell Digital connect. $4000 retail in the USA, more overseas. Connect Stream Player The Krell Connect, the ultimate in high-resolution audio streaming technology. From FLAC to WAV, MP3 and WMA, the Connect plays back up to 192kHz/24-bit audio plus Internet radio, all to Krell's highest fidelity standards. The Wi-Fi equipped Connect is available with a built-in Digital-to-Analog Converter (DAC) module. The DAC-equipped Connect has a 32-bit ESS Sabre chipset with discrete, direct-coupled analog circuitry outputting via RCA or balanced audio outputs. Extensive audio libraries are easy to navigate via the Connect's built-in 3.5-inch QVGA LCD screen. Alternately, a full-featured iOS app offers full control from anywhere in the home. In addition to playback of FLAC and WAV files up to 192kHz/24-bit, the Connect also streams Ogg, WMA, and MP3. Unlike some music streamers, gapless playback is possible, allowing for no breaks between album tracks. Live concert albums, for example, can be played as a seamless, uninterrupted experience Internet radio gets the same conversion as the high-resolution files (on DAC-equipped models), providing the best possible sound quality from on line streaming content. Learn More

PS Audio Perfectwave Directstream DSD DAC silver or black original box,etc excellent Learn More

The Melior Bitstream™ D/A converter has become a reference standard. The Melior Bitstream™ Converter has two digital inputs, one fiber optic and one co-axial. Two independent digital sources can be connected to the unit. A front panel membrane switch allows you to choose between the two. The input frequency rate is automatically sampled and displayed on the front panel. This means that any two digital inputs can be used regardless of sample rate. Learn More

Wyred4SoundDAC2 excellent condition, with box/remote Learn More

Naim NDS Streamer excellent condition in 4/23 part of a complete Naim system for sale Learn More

Nakamichi Dragon CD transport and DAC just refurbished 5/23 extremely rare Learn More

Musical Fidelity KW DM25 DAC and Transport with remote, excellent with manuals new laser just installed for you on the transport Learn More

Mark Levinson 360 d/a converter Description: Digital/analog converter with dual-differential 24-bit/96kHz DACs. Input data rates accepted up to 96kHz. DSP processor, full remote control, HDCD decoding, 8x oversampling digital filter, Bessel-tuned, linear-phase analog filter and phase inversion switching. Digital inputs: 2 AES/EBU, ST, TosLink, RCA, BNC. Digital output: XLR. Fixed-volume analog outputs: XLR balanced, RCA unbalanced. Source impedance: less than 6 ohms. Connectors and capability for Mark Levinson and PHASTlink integrated system control. RS-232 port for communications and programming. Dimensions: 15.75" (404mm) W by 3.84" (98mm) H by 14.3" (367mm) D. Shipping weight: 35 lbs (15.9kg). Learn More

Analog volume control for RCA and XLR outputs sold do not purchase Separate volume control for the headphone Jacks Digital audio connection to LightingTM jack-equipped Apple® devices (USB adapter required) Updated headphone amp with increased gain 1/4" and 1/8" 24k gold plated headphone jacks 12V input and output triggers Volume control lock out switch Premium Analog Devices AD1853 24-bit/192 kHz Digital to Analog Converter IC All inputs feature jitter reduction and are re-clocked and up-sampled to 422 kHz / 24 bit USB input for playing music from PC or Mac (driver-less for easy setup) Asynchronous sample rate conversion for all inputs including the USB input Works with any format file on your computer up to 96 kHz / 24 bit Optical and Coaxial digital inputs for use with any standard digital connection RCA unbalanced and XLR balanced analog outputs High current headphone output with volume control can drive any headphones from 32 to 600 ohms Oversized internal toroid power transformer (not a wall wart like many competitors) Will always power back up to the same input in the event of an AC power outage Learn More

Theta timelinque box and power supply missing Timebase Linque Conditioner Originally, there was only one method available to connect a CD player / transport to an outboard D to A converter, that being coaxial. The mass-market manufacturers then produced players with the inferior TosLink plastic fiber optic output. AT&T glass fiber optics also became available as a means to interconnect digital equipment. All of these termination methods posed a problem for people trying to buy components that would interface with each other. The Timebase Linque Conditioner was designed to solve these problems. It accepted TosLink and coaxial inputs and output coaxial and optionally AT&T or Theta's Laserlinque. It also contained extensive re-clocking circuitry to combat the deleterious effects of jitter. Poor quality transports still pervaded the market, reducing the effective quality level Theta's D to As could offer. The Timebase Linque Conditioner ameliorated some of the problems. It was even found to improve the sound of our then best combination, the Data III / Generation V. All of the digital-to-analog converters up until that time used integrated circuits (ICs) called op-amps, for the critical current-to-voltage conversion that occurs following the DAC, and for the output buffers. At that time, integrated circuit chips generally were used as cost-efficient compromises, which lowered the quality of components that depended on them, in comparison with equivalent circuits made up of discrete elements on a circuit board. After about a year of research, a new analog section was developed for the Generation III, based entirely on discrete class-A bipolar transistor. This circuitry offered greater processing speed, which produced more detail and a smoother sound. Learn More

Mark Levinson No.36 d/a converter, bench tested works great Digital converter: dual differential 20 bit Digital Inputs: Coaxial, AES/EBU, Optical Sampling Frequency: 32, 44, 48kHz Frequency response: 10Hz to 20kHz Dynamic range: 98dB Signal to Noise Ratio: 105dB Channel separation: 110dB Total harmonic distortion: 0.001% Dimensions: 400 x 97.5 x 363mm Weight: 16kg Learn More

Wadia Digimaster X32 with round buttons and att (later version) Learn More

Meridian 566 Learn More

Theta Timebase Linque Conditioner Theta Digital Timebase Linque Conditioner - * Add this between Transport and DAC to clean up the digital signal. * With optional factory power supply box. From Website - "Anti Jitter device. Theta Digital's Timebase Linque Conditioner (TLC) works by "cleaning up" the digital signal from your transport or other digital source. Inside the TLC, the digital signal is conditioned with ultra-fast logic and re-clocked with an ultra-low-jitter master clock. The TLC can be used to improve the quality of virtually any digital source, producing increased detail more stable imaging, and better transparency. It's a much more involving experience." Learn More

Mcintosh MB100 Media Bridge excellent with original box/packing With music now being created, stored and distributed in an assortment of ways, you need a simple yet sophisticated device to manage it all. The MB100 Media Bridge does just that by connecting you to all your favorite web based and hard drive stored digital music and allows it all - including uncompressed, lossless 24-bit/192kHz files - to be enjoyed in legendary McIntosh sound. With all of its onboard storage and external connection capabilities, it can easily serve as the hub for all your digital media. A 1TB internal hard drive is included for content storage, while four USB ports and one eSata port allows you to connect additional external hard drives or flash drives full of content. The high speed network port connects you to your preferred online streaming services such as Pandora®, SiriusXM®, Spotify®, Rhapsody and TuneIn (subscriptions may be required), while additional streaming services may be added in the future. You can also add your favorite internet radio stations as presets. Two analog or two digital outputs connect the MB100 to the rest of your audio system, or connect it via USB to any of your other McIntosh products that accept USB audio. Creating two independent zones of audio is available when using the USB connection in combination with the analog or digital outputs. The MB100 can automatically synchronize the content stored on your networked computers so it is readily accessible and playable. Guests can stream music from their personal iOS devices to the MB100 via AirPlay®. When connected to a video monitor, you can watch a slideshow of your favorite photos while playing the music of your choice. All of your content can be backed up to the Amazon Cloud Drive or Apple iCloud. This also allows for your music to be synchronized across multiple homes or locations. The MB100 can even be configured so that your new music purchases from either cloud service can be automatically added to your library for easy enjoyment. The MB100 utilizes the same highly regarded 8 channel, 32-bit, 192kHz DAC with wide dynamic range and extremely low distortion as our D100 digital preamp. The DAC is isolated from the motherboard, ensuring music at all levels is reproduced with extreme precision and elegance. The operating system and music player are housed on a state-of-the-art solid state hard drive for fast response times, quiet operation and durability. The MB100 is controlled via an iOS or Android app, a web browser, or a remote control with TV interface and is compatible with many popular home automation systems allowing for easy integration into your existing setup. MB100 Media Bridge powered by Autonomic. *AirPlay requires iTunes 10.1 or later and iPhone, iPad or iPod touch with iOS 4.3.3 or later. To wirelessly stream music to the MB100, a wireless router is required. Router not included. AirPlay and the AirPlay logo are trademarks of Apple Inc., registered in the U.S. and other countries. ELECTRONIC SPECIFICATIONS ULTRA LOW DISTORTION 0.005% FREQUENCY RESPONSE ±1DB 2Hz to 22,000Hz MAXIMUM VOLTS OUT (BALANCED / UNBALANCED) 4/2 V RMS SIGNAL TO NOISE RATIO 102dB OUTPUT IMPEDANCE 600 ohms (Balanced / Unbalanced) DYNAMIC RANGE 96dB CONNECTIVITY OUTPUTS UNBALANCED 1 Stereo OUTPUTS BALANCED 1 Stereo DIGITAL COAXIAL OUTPUT 1 DIGITAL OPTICAL OUTPUT 1 DIGITAL USB INPUT 4 (2 USB 2.0 / 2 USB 3.0) DIGITAL USB AUDIO OUTPUT 1 (compatible only with McIntosh products that accept USB audio) NETWORK CONNECTION 1 (10/100/1000) DVI OUTPUT 1 (for GUI only) HDMI OUTPUT 1 (for GUI only) ESATA INPUT 1 DIGITAL AUDIO SPECIFICATIONS DIGITAL OUTPUT FORMAT SPDIF (PCM) DIGITAL OUTPUT SAMPLE RATE Up to 24-Bit/192kHz CONTROL POWER CONTROL INPUT 1 POWER CONTROL OUTPUT 1 REAR PANEL DATA INPUT 1 REAR PANEL IR SENSOR INPUT 1 WEIGHTS & DIMENSIONS DIMENSIONS (W X H X D) 17.5" (44.45cm) x 3-7/8" (9.8cm) x 16" (40.64cm) WEIGHT 13.5 lbs (6.1kg) SHIPPING WEIGHT 28 lbs (12.7kg) Learn More

MBL 1611 and 1621 arriving 11/24 factory packing Learn More