2 AVAILABLE
The ST-PC is a Cresnet® expansion module that provides switching of AC power to two individual loads for on/off control of video monitors, tape decks, small audio amplifiers, and other AC powered devices. The ST-PC may be used to provide a power control interface wherever required for loads up to 1200 Watts, and may be rack-mounted using the optional ST-RMK rack mount kit (sold separately). Communication with the control system is via a single Cresnet connection.
POWER A – B (2) 3-prong grounded AC sockets, switched AC power outlets;
Maximum Load per Outlet: 10 Amps at 120 Volts AC tungsten load;
Maximum Load Total: 10 Amps at 120 Volts AC
POWER IN (1) 6 ft (1.83m) cable with grounded AC plug;
Connects to AC power source
NET (2) 6-pin RJ11 female, Cresnet slave ports, paralleled;
Connect to Cresnet control network
12VDC (1) 2.5mm barrel DC power jack
12 Volt DC power input (PW-1205 power pack included)
Controls & Indicators
PWR (1) green LED, indicates power supplied from Cresnet network or local power pack
NET (1) amber LED, indicates communication with Cresnet system
POWER A – B (2) pushbuttons and red LEDs; pushbuttons toggle each corresponding power outlet on/off when control system is inactive, or function as programmable pushbuttons when control system is active; LEDs indicate when corresponding outlet is on
Power Requirements
Power Pack 0.5 Amp @ 12 Volts DC;
120 Volts AC, 60 Hz power pack, model PW-1205, included
Cresnet Power Usage 4 Watts (0.167 Amp @ 24 Volts DC) with no power pack connected
