High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

solid state

Grid  List 

21 Item(s)

per page
  • Bryston B100-SST in black or silver

    Bryston B100-SST in black or silver

    Bryston B100-SST, like new, all packing, remote/manual/cord silver doesn't have original box but has rest 05/13/2009 Learn More
    $2,150.00

  • Classe CAP-2100

    Classe CAP-2100

    Classe CAP-2100 with remote and manual Learn More
    $2,200.00

  • ASR Emitter Plus

    ASR Emitter Plus

    ASR Emitter Plus. Probably the best value in a reference caliber integrated you will ever find. Learn More
    $6,999.00

  • Mcintosh Ma6500
    $3,000.00

  • Devialet Expert 200

    Devialet Expert 200

    Devialet Expert 200, original box/packing, excellent condition Learn More
    $3,500.00

  • Arcam A28 integrated amplifier

    Arcam A28 integrated amplifier

    Arcam A28 integrated amplifier Power output: 75 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.5% Input sensitivity: 2.5mV (MM), 250mV (line) Signal to noise ratio: 88dB (MM), 98dB (line) Output: 0.63V (Pre out) Dimensions: 432 x 275 x 85mm Weight: 8.5kg Learn More
    $799.00

  • Acurus DIA-100 Digital Input Amplifier

    Acurus DIA-100 Digital Input Amplifier

    Acurus DIA-100 Digital Input Amplifier, bench tested 5/18 Learn More
    $600.00

  • Arcam A18 intergrated Amplifier

    Arcam A18 intergrated Amplifier

    Arcam A18 intergrated Amplifier, bench tested 5/18 Learn More
    $450.00

  • Linn Majik

    Linn Majik

    Linn Majik tested 5/18 Learn More
    $485.00

  • Revox B-250-S Integrated with B210 remote terminal and B207 Infrared transmitter

    Revox B-250-S Integrated with B210 remote terminal and B207 Infrared transmitter

    Revox B-250-S Integrated with B210 remote terminal and B207 Infrared transmitter, in rare top of the line black Learn More
    $2,500.00

  • Krell Digital Vanguard

    Krell Digital Vanguard

    Krell Digital Vanguard $6000 retail Digital Vanguard Integrated Stereo Amplifier The Digital Vanguard incorporates a 200-watt-per channel amplifier and a Class A preamplifier, enclosed in a chassis that borrows its design and construction from the new Krell Foundation preamp/processor, Connect stream player, Illusion preamp and iBias amplifiers. Digital support has been included with USB, HDMI, coaxial, and optical inputs as well as Ethernet audio and Bluetooth streaming. The Vanguard’s amplifier incorporates a massive power supply with a 750 VA toroidal transformer and 80,000 microfarads of storage capacitance. The tremendous amount of energy on tap provides 200 watts per channel into 8 ohms and 400 watts into 4 ohms. Two quiet, thermostatically controlled fans permit the use of a surprisingly compact chassis. The preamplifier section of the Vanguard borrows its balanced, fully discrete Class A circuit concepts from Krell’s top-of-the-line Illusion preamplifiers. Krell’s Current Mode technology is employed to assure unequaled signal bandwidth, easily enough to handle the latest high-resolution PCM and DSD audio sources without impacting high-frequency response and detail. Packed with many of Krell’s most musical-sounding technologies, the elegant chassis is living-room-friendly. Yet it has enough power to achieve incredible, lifelike dynamics with any speaker. The front-panel menu system provides configuration features such as input naming and input trim. Theater Throughput mode lets the Vanguard serve as the core of a surround-sound system without sacrificing two-channel sound quality. Analog Inputs include three stereo RCA and one stereo balanced XLR. High-quality WBT speaker cable terminals provide a secure, electrically ideal connection. The Vanguard also offers features that make it perfect for custom installation, such as 3.5mm jacks for IR input and 12-volt trigger input and output, as well as optional rack-mount ears. Additionally, the unit can be controlled with home automation systems through its Ethernet connection. A key feature for the Digital Vanguard is its digital module, which includes USB, HDMI inputs and output, coax and optical digital inputs; Ethernet music streaming controlled through dedicated iOS and Android apps; and Bluetooth wireless for convenient streaming from phones, tablets and computers. The Vanguard also offers features that make it perfect for custom installation, such as 3.5mm jacks for IR input and 12-volt trigger input and output, as well as optional rack-mount ears. Additionally, the unit can be controlled with home automation systems or the Krell web server through its Ethernet connection. Digital Vanguard Specifications Inputs 1 pr. balanced via XLR connectors 3 pr. single-ended via RCA connectors 1 HDMI 1 USB Outputs 1 pr. speaker outputs via WBT gold-plated binding posts Control inputs 1 remote IR detector input via 3-conductor 3.5 mm connector 1 12 VDC trigger input via 2-conductor 3.5 mm connector Control output 1 programmable 12 VDC trigger output (300 mA maximum current) via 2-conductor 3.5 mm connector Input impedance Balanced: 95 kΩ Single-ended: 47.5 kΩ Frequency response 20 Hz to 20 kHz +0, –0.01 dB <2 Hz to 150 kHz +0, –3 dB Signal-to-noise ratio >90 dB, wideband, unweighted, at maximum gain, referred to full power output >97 dB, “A”-weighted Gain 48 dB Input sensitivity Single-ended or balanced: 160 mV RMS Total harmonic distortion <0.015% at 1 kHz, at 200 W, 8 Ω load <0.13% at 20 kHz, at 200 W, 8 Ω load Output power 200 W RMS per channel at 8 Ω 400 W RMS per channel at 4 Ω Output voltage 113 V peak to peak 40 V RMS Output current 16 A peak Slew rate 50 V/μs Output impedance <0.066 Ω at 20 Hz <0.075 Ω, 20 Hz to 20 kHz Damping factor >121 at 20 Hz, referred to 8 Ω >106, 20 Hz to 20 kHz, referred to 8 Ω Power consumption Standby: 12 W Idle: 70 W Maximum: 1300 W Heat output Standby: 41 BTU/hr Idle: 239 BTU/hr Maximum: 4436 BTU/hr Dimensions 17.1 in W x 4.15 in H x 17.5 in D 434 mm W x 105 mm H x 445 mm D Weight Unit only: 39 lb [17.7 kg] As shipped: 47 lb [21.3 kg] Digital Module Specs Coaxial and HDMI inputs support PCM up to 24-bit/192kHz. Optical input up to 24-bit/96kHz HDMI inputs support DSD and 4K video content. HDMI output supports Audio Return Channel (ARC) USB and Network streaming support MP3, AAC, WMA, WAV(PCM), FLAC, ALAC up to 192kHz Bluetooth streaming supports A2DP, AVRCP, HFP, HSP Learn More
    $2,999.00

  • Pioneer Ellite A-91D

    Pioneer Ellite A-91D

    Pioneer A-91D bench tested good currently missing two knobs Learn More
    $600.00

  • Mcintosh MA6600

    Mcintosh MA6600

    Mcintosh MA6600 , with manual and Mcintosh remote. excellent cosmetics Learn More
    $3,900.00

  • Mark Levinson 383 integrated amp

    Mark Levinson 383 integrated amp

    Mark Levinson 383 integrated amp with remote Solid-state integrated stereo amplifier. Preamplifier section: Line-level inputs: two pairs balanced (XLR), three pairs single-ended (RCA, optional). Outputs: one pair record outputs (RCA), one IEC AC mains receptacle, one ground terminal. Controller connections: three 3.5mm mini-jacks (IR input, DC trigger out/in), one Mark Levinson Link communications connector, one 6-pin RJ-11 RS-232 port, two 8-pin RJ-45 control ports (PHASTLink-compatible). Voltage gain: 0, 6, 12, or 18dB in line stage (26.9dB in amplifier stage). Volume control range: 72.2dB. Gain resolution: 0.1dB steps above 38.5 in display (-34.7dB). Input overload: 4V on XLR, 2V on RCA (gain set to +12dB); 16V on XLR, 8V on RCA (gain set to 0dB). Frequency response: 10Hz-40kHz, ±1.0dB. Input impedance: 100k ohms. THD+noise: ±0.3%. Mains voltage: 100V, 120V, 220V, 230V, or 240VAC at 50 or 60Hz (factory set). Power consumption: typically 100W at standby, 200W at idle, 1200W at 4 ohms at rated output. Amplifier section: Rated output power: 20Hz-20kHz, less than 0.3% THD (FTC): 100Wpc into 8 ohms (20dBW), 200W minimum continuous into 4 ohms (20dBW). Frequency response: 20Hz-20kHz, ±0.1dB. Output impedance: ±0.05 ohms, 20Hz-20kHz. Damping factor: greater than 800, 20Hz-20kHz into 8 ohms. Speaker connections: one pair Madrigal-designed speaker binding posts. Dimensions: 17.56" (446mm) W by 6.55" (166mm) H by 19.5" (495.3mm) D. Shipping weight: 80 lbs (36.6kg). Learn More
    $3,290.00

  • Naim Nait XS-2 upgraded unit

    Naim Nait XS-2 upgraded unit

    Naim Nait XS-2 upgraded unit from XS Learn More
    $1,800.00

  • PS Audio GCC-100

    PS Audio GCC-100

    one owner, with remote The GCC-100 is a stereo, 100 watt per channel Control Amplifier that produces 200 watt per channel into 4 Ohms and drives speaker loads as low as 1.5 Ohms. It has a damping factor that exceeds 1000 and is capable of driving any moderate loudspeaker to live orchestral crescendo levels. The GCC-100 has an input impedance of 47K Ohms, and features 4 RCA and 1 XLR balanced input and an auxilliary output to drive another amplifier or a subwoofer. It can be remotely turned on/off with a simple 12 volt trigger or the supplied remote control, is a fully balanced amplifier with noise levels low enough that you’ll have to place your ear next to the tweeter to even hear if it’s working. The GCC-100 is a perfect music center for the most discerning stereo system and has the best midrange and top end of any of the three models (although they're all great) Learn More
    $900.00

  • ASR Emitter II Exclusive 4 chassis integrated amplifier

    ASR Emitter II Exclusive 4 chassis integrated amplifier

    ASR Emitter ii Exclusive with gold heatsink option Description: Solid-state, multi-chassis, integrated amplifier with remote control. Maximum output power: 280Wpc into 8 ohms (24.5dBW), 500Wpc into 4 ohms (24dBW), 900Wpc into 2 ohms (23.5dBW), 1400Wpc into 1 ohm (22.4dBW). Frequency response: 0.2Hz–500kHz, –3dB. Distortion: <0.02%, 50mW to 1dB under maximum RMS output at 1kHz; <0.1%, 20Hz–20kHz. Input impedance: 10k ohms. Input sensitivity (for 150W into 8 ohms): level "61," 2.0V; level "76," 400mV. Voltage Gain: up to 28dB in position 1, up to 43dB in position 2, depending on volume setting. Signal/Noise Ratio: >90dB ref. 1W/8 ohms. Dimensions: Amplifier: 22.4" (570mm) W by 9.1" (230mm) H by 17.3" (440mm) D. Weight: 103 lbs (47kg). Two power supplies (each): 16.9" (430mm) W by 5.9" (150mm) H by 15.6" (400mm) D. Weight: 70.6 lbs (32kg). Battery pack: 16.9" (430mm) W by 5.9" (150mm) H by 15.6" (400mm) D. Weight: 57.3 lbs (26kg). original four boxes with packing, just recapped and ready to go (not the 56 filter caps, no need to change those) six month warranty THIS SOUNDS SPECTACULAR! Learn More
    $11,999.00

  • Anthem INTEGRATED 225

    Anthem INTEGRATED 225

    Anthem INTEGRATED 225, excellent condition Learn More
    $1,080.00

  • Daniel Hertz Genius Integrated amplifier with USB

    Daniel Hertz Genius Integrated amplifier with USB

    Daniel Hertz Genius Integrated amplifier with USB specifications: Power 2 x 50 Watts at 8 Ohm inputs 2 analogue 1 digital (usb) outputs 1 pre out Weight: 8 kg Learn More
    $999.00

  • Revox B251

    Revox B251

    Revox B251 , excellent, serviced. Learn More
    $900.00

  • Cambridge Audio CXA80

    Cambridge Audio CXA80

    Cambridge Audio CXA80 Tech specs POWER OUTPUT 80W RMS into 8 Ohms, 120W RMS into 4 Ohms DAC Wolfson WM8740 FREQUENCY RESPONSE <5Hz– 60kHz +/-1dB ANALOGUE AUDIO INPUTS 1x balanced XLR, 4 x RCA, 1 x 3.5mm MP3 input (front panel) DIGITAL AUDIO INPUTS 1 x S/PDIF coaxial, 2 x TOSLINK optical, 1 x USB audio, Bluetooth via BT100 (not supplied) COMPATIBILITY TOSLINK optical, S/PDIF coaxial, USB 1.0 and 2.0, BT100 Bluetooth receiver OUTPUTS Speakers A+B, 3.5mm headphone, Preamp Output, Subwoofer Output MAX POWER CONSUMPTION 750W STANDBY POWER CONSUMPTION <0.5W DIMENSIONS (H X W X D)* 115 x 430 x 341mm (4.5 x 16.9 x 13.4”) WEIGHT 8.7kg (19.1lbs) Learn More
    $400.00

Grid  List 

21 Item(s)

per page