solid state

Classe CAP-2100 with remote and manual Learn More

Krell KAV-400Xi Stereo Integrated Amplifier Power output: 200 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.25% Input sensitivity: 644mV (line) Signal to noise ratio: 99dB (line) Speaker load impedance: 4Ω (minimum) Dimensions: 500 X 89 X 432mm Weight: 14.1kg Accessories: remote control Learn More

Devialet Expert 130 Pro DAC-Integrated Amplifier The Expert Pro 130 is well above and beyond an ordinary amplifier. In fact Devialet has reinvented and combines all of the key components of an audiophile system (preamplifier, amplifier, DAC, streamer, phono stage) into a single and extremely thin slab. In the 140’s case this has been combined into a stereo amplifier that is fully configuratable and incorporates all of Devialet’s latest technology including ADHV2®, SAM®, AIR®, EVO®, DAC Magic Wire®. The Expert 130 Pro represents the most beautiful gateway into a new kind of audiophile world. It includes all Devialet exclusive technologies as well as major innovations developed for the new Expert Pro range, including distortion performance multiplied by 2 in stereo and an architecture designed to develop towards new uses The performance delivered by Devialet Expert is the best ever measured, under actual usage conditions (Dual-Mono measurement): 0.00025%THD+ noise (harmonic distortion) at full power 0,0001%THD at 10W/6Ω 0.001Ω Output impedance 133 dB Signal-to-noise ratio Finish: Chassis carved out of a single aluminium block Color: Chrome Finish Dimensions: Length: 383mm | Width: 383mm | Height: 40mm Weight: 5.65Kg Installation: Horizontal or vertical installation with automatic tilt detection Power: 2 x 140 Watts RMS @ 6Ω Signal-to-Noise ratio: 140dB THD – 140W/6Ω: 0.0005% / -106dB THD – 10W/6Ω: 0.00025% / -112dB Output impedance: 0,001Ω Damping factor: 8000 Bandwidth: DC-30kHz (-0.1dB), DC-95kHz (-3dB) Phase: 0.4° at 20kHz, 1.8° at 40kHz Thermal Distortion: Below measurement threshold Technologies: ADHV2®, SAM®, AIR®, EVO®, DAC Magic Wire®, RAM® Intelligence 3 x SHARC 400 MHz DSP’s 1 x 16 MHz RISC processor 4 x 40 MHz RISC processors 1 x 64 MHz RISC processor Learn More

Simaudio Moon i5.3 integrated with metal remote black Learn More

Linn Majik tested 5/18 Learn More

Arcam A18 intergrated Amplifier, bench tested 5/18 Learn More

Acurus DIA-100 Digital Input Amplifier, bench tested 5/18 Learn More

Arcam A28 integrated amplifier Power output: 75 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.5% Input sensitivity: 2.5mV (MM), 250mV (line) Signal to noise ratio: 88dB (MM), 98dB (line) Output: 0.63V (Pre out) Dimensions: 432 x 275 x 85mm Weight: 8.5kg Learn More

Devialet Expert 200, original box/packing, excellent condition Learn More

ASR Emitter Plus. Probably the best value in a reference caliber integrated you will ever find. Learn More

Bryston B100-SST, Learn More

Revox B-250-S Integrated with B210 remote terminal and B207 Infrared transmitter, in rare top of the line black Learn More

Revox B251 , excellent, serviced. Learn More

Daniel Hertz Genius Integrated amplifier with USB specifications: Power 2 x 50 Watts at 8 Ohm inputs 2 analogue 1 digital (usb) outputs 1 pre out Weight: 8 kg Learn More

Goldmund Telos 590 NextGen II integrated amplifier , like new, complete $30000 retail Learn More

ASR Emitter ii Exclusive with gold heatsink option Description: Solid-state, multi-chassis, integrated amplifier with remote control. Maximum output power: 280Wpc into 8 ohms (24.5dBW), 500Wpc into 4 ohms (24dBW), 900Wpc into 2 ohms (23.5dBW), 1400Wpc into 1 ohm (22.4dBW). Frequency response: 0.2Hz–500kHz, –3dB. Distortion: <0.02%, 50mW to 1dB under maximum RMS output at 1kHz; <0.1%, 20Hz–20kHz. Input impedance: 10k ohms. Input sensitivity (for 150W into 8 ohms): level "61," 2.0V; level "76," 400mV. Voltage Gain: up to 28dB in position 1, up to 43dB in position 2, depending on volume setting. Signal/Noise Ratio: >90dB ref. 1W/8 ohms. Dimensions: Amplifier: 22.4" (570mm) W by 9.1" (230mm) H by 17.3" (440mm) D. Weight: 103 lbs (47kg). Two power supplies (each): 16.9" (430mm) W by 5.9" (150mm) H by 15.6" (400mm) D. Weight: 70.6 lbs (32kg). Battery pack: 16.9" (430mm) W by 5.9" (150mm) H by 15.6" (400mm) D. Weight: 57.3 lbs (26kg). original four boxes with packing, just recapped and ready to go (not the 56 filter caps, no need to change those) six month warranty THIS SOUNDS SPECTACULAR! Learn More

one owner, with remote The GCC-100 is a stereo, 100 watt per channel Control Amplifier that produces 200 watt per channel into 4 Ohms and drives speaker loads as low as 1.5 Ohms. It has a damping factor that exceeds 1000 and is capable of driving any moderate loudspeaker to live orchestral crescendo levels. The GCC-100 has an input impedance of 47K Ohms, and features 4 RCA and 1 XLR balanced input and an auxilliary output to drive another amplifier or a subwoofer. It can be remotely turned on/off with a simple 12 volt trigger or the supplied remote control, is a fully balanced amplifier with noise levels low enough that you’ll have to place your ear next to the tweeter to even hear if it’s working. The GCC-100 is a perfect music center for the most discerning stereo system and has the best midrange and top end of any of the three models (although they're all great) Learn More

T&A P1230R with mc phono option Founded in 1978, T+A Elektroakustik of Germany began by building loudspeakers and by 1988 had expanded to electronics. By 1997 T+A which stands for Theory + Application was into active loudspeaker design, CD players, tuners, DACs and home theater components. Today all the essential components and software are developed in house. Subcontractor and final production is fully based in Germany. Learn More

Naim Nait XS-2 upgraded unit from XS Learn More