Phono

Denon DP-6000 with Plinth and Tonearm Learn More

Kenwood KD-500 with Black Widow arm without cardtridge Learn More

Technics SL-10 direct drive automatic linear tracking turntable tested 5/18 excellent condition Learn More

Well Tempered Classic Turntable Learn More

Goldmund Studio With T3F and PL8 controller Just serviced, very nice condition no phono cartridge included Learn More

Thorens TD126 MKIII Learn More

Thorens 124 with Swissnoror upgrades to MK 2? Learn More

Sumo II moving coil cartridge from the estate of someone who built very high end tonearms in the industry very rare specs found online: Extremely low Mechanical "Q" as a result of its perfectly balanced cantilever assembly which has an absolute minimum of ringing when subjected to high velocity accelerometer tests. Specially tapered aluminum alloy cantilever-Many were tried, including Beryllium Oxide, etc.. however the tapered aluminum had the least amount of tortional resonances which was a big problem in previous designs. Optimum stylus geometry-The stylus is Elliptical with a size of .2 mil x .6 mil. After much experimental work, it has been found that this shape is optimum in order to provide the lowest amount of groove noise and chatter while maintaining tracking ability in the inner grooves. High Density Ferrite magnet- Found to be an improvement over High Energy Samarium Cobalt magnet in previous designs. DC RESISTANCE-16 Ohms Impedance-16 Ohms Load resistance- 1000 Ohms minimum Channel separation- 27db (1 kHz) Gross weight-5.6 grams Output terminal pin diameter- 1.2 mm Stylus Force-1.6-2.0 grams Vertical angle-2.0 deg. Learn More

Ariston RD-11S Turntable with Shure SME 3009 tone arm Description Drive - Belt drive 24-pole hysteresis synchronous motor on silicone isolation sub frame Platter - Two piece precision ground and balanced platter of 9.5 pound mass Main bearing - Precision ptfe. Main shaft with teflon cushioned main bearing shaft. This ultra low friction self lubricating bearing gives the Ariston turntables state of the art performance. This new technology gives the Ariston turntables the lowest rumble figures measurable Suspension - Free floating sub cradle with low mass circular tone arm board and platter, on steel coil springs with polyurethane dampers. This unique system makes the Ariston turntables the least prone to feedback with minimal stylus bounce due to severe floor vibration Specifications Speeds: 33.33 and 45rpm Wow and flutter: 0.03% Rumble: -74dB weighted Tonearm: available with either SME, Grace or blank armboard Weight: 13kg Base: Teak with plexiglass cover and friction hing Learn More

Project X2 in 8/22 6 month old $2100 retail like new box/packing Learn More

Sota Sapphire with Premier arm and junction box Learn More

Well Tempered Turntable Bill Firebaugh, who retired from Ford Aerospace in 1988, remains one of phonography's most notable innovators—and a manufacturer of exceptional integrity and humility. As evidence of the former, I offer the fact that there has never been a Well Tempered CD Player; as for the latter, Firebaugh's reputation is well summed up by something he told me earlier this year: "A phonograph record is one of man's greatest inventions; I consider myself to have found one tiny piece of the puzzle." Learn More

VPI Aries with tonearm In 12/24 Learn More

VPI TNT 4 upgraded to 5 with separate flywheel option and with Graham 1.5 tonearm and two piece dustcover, currently in NY/NJ 10/18 difficult and expensive to ship the table and dustcover as they are large and fragile. Phone us at 8888504366 . This really should ship by truck for safest delivery. inquire for availability Learn More

VPI SuperScoutmaster with Rim Drive and Periphery Clamp Learn More

Cello Chorale by Miyab (used with Cello Zarathustra turntable by original owner Haruo Takeda the creator of the Miyabi phonograph cartridges also built this one and others for various manufactures such Mark Levinson, Krell, Cello, Red Rose and Mofi. Very rare Learn More

VPI JMW 12.6 tonearm and counterweight As new condition Nordost Valhalla wiriing Learn More

Bang & Olufsen Beogram 4004 This will have a new belt and capacitors in the power supply Learn More

VPI HW-40 NEW We are dealers for VPI, please phone (888)850-4366 to discuss cover not included Learn More

Sota Cosmos black Learn More

Goldmund Reference restoration in progress 9/24 This includes the T3F tonearm Tonearm completely overhauled. Very good cosmetics. A crate will need be built if not for local pickup and this must only ship by freight Learn More

Athena Audio Polyphasor MC-1 Moving Coil Magnetic Interface Great Condition Silver Learn More

Brinkmann Balance retails is approximately $29470 : $25990 plus the 10.5" factory arm adds 6490 with optional tube power supply a $6990 option excellent cartridge not included currently in NY inquire for freight options Our heaviest turntable keeps on running and running and running... with legendary quietness. Since its introduction in 1985, the »Balance« combines timeless beauty, highest sound quality and perfect build quality. The basic design has remained the same (honestly, there isn?t much to improve), but in the best Brinkmann tradition, the turntable has seen continuous evolution und sonic optimizations. Hence today, the turntable is state of the art in terms of aesthetics and technology – as it has always been – while sounding better than ever. Little wonder then that the »Balance« is used as the absolute reference turntable not only by Brinkmann, but quite a few renowned publications aswell. Not surprisingly, the »Balance« has received quite a few awards over the years: the “Gold Medal” for turntables from the “Image Hifi Millenium Awards” or the “Blue Moon” award from www.6moons.com. The newest addition to our product range is the 2-arm Balance. The 4 phase (4 times 90°) Sinus motor of the Balance enables a very smooth rotation without cogging. The RöNt II tubed power supply is the ideal completion for the »Balance« Brinkmann Balance specs from manufacturer Specifications Drive precision ground round belt Dimensions (WxDxH) 550 x 400 x 140 mm Weight 33 kg Platter weight 18 kg, Ø 316 mm, height 90 mm. Platter surface planar polished crystal glass (recessed mounting) Tonearm base available for 9...10.5'' tonearms (arm mountings available for virtually any tonearm), easy and quickexchange and adjustments are provided via a collar system. Learn More

Sumiko Celebration Pearwood Signature lightly used, phone us! Learn More

VPI TNT walnut armboard cut for Graham 2.0 used, rare Learn More

VPI TNT upgraded JMW 12" complete tonearm with base , current 20lb stainless platter, rebuilt motor modern hrx type suspension corners ships in two boxes, six month warranty. Excellent cosmetics. Learn More

Monster Cable Genesis 1000 Alpha One owner since new Learn More

Thales Compact II with Simplicity arm captive rca wire retail $25600 Learn More

VPI Classic 4 tonearm jmw 12.6 replacement stainless steel, $1400 12" arm armbase available separately Learn More

VPI Prime Signature Rosewood Turntable New in stock We also have a black signature 21 in stock as of 11/24 We are VPI dealers, Inquire for price at (888)850-4366 Learn More

Clearaudio Innovation Wood with Absolute Phono $40300 retail 1. ClearAudio Innovation Wood turntable with 9" tonearm - Retail $19500 2. ClearAudio Outer Limit Ring Clamp - Retail $1500 3. ClearAudio Statement Record Weight - Retail $1200 5. Arm board for Kuzma 4Point tonearm - Retail $300 6. Arm board for Graham tonearm - Retail $300 7. . Clearaudio Absolute Phono Active Headshell Phonostage -Retail $17500 It will ship in two boxes Learn More

VPI Scoutmaster in as new condition complete with arm Learn More

VPI JMW 12" 3D Reference, original box packing/as new Learn More

VPI Prime Signature 21 Rosewood NEW Full Warranty Free Shipping $9000 retail Learn More

Krell LAT1000 Center Channel silver with stand used $30000 retail 250lbs in 10/21 Learn More

VPI HW JR. with Audioquest PT tonearm and new Ortofon cartridge, dustcover and original box/packing Learn More

VPI JMW 10 mk iii/iv armboard Learn More

Loricraft PRC3 used, arriving 11/24 Learn More

Revox B791 Learn More

Soundsmith Carmen MKII medium compliance, high output 47k load 100-200pf in stock free ship, call for price at (888850-4366) Learn More

Krell FPB200 More than one available. Learn More

best of the best., low hours Learn More

One owner. With original tonearm. beautiful condition. The ST4 is typically a later version Studio that comes with internally servo controlled arm already mounted from Goldmund. The adjustments are on on the top of the table directly beneath the arm. Learn More

Dynavector DV-20X2H Learn More

Yamaha YP800 with original box/packing Ortofon MC20 cartridge included sold 1/24 Learn More

Keith Monks original record cleaning machine this is very rare and collectable. original condition, we haven't touched yet. In 9/24 Learn More

wonderful sounding, was a giant killer in its day Learn More

VPI Classic II as new condition Original box/packing Learn More

Thorens TD124 with arm and base inquire before purchasing. Local pickup only or delivery on I95 corridor possible. Learn More

Jeff Rowland Model 5 with factory crate (grey so it is not a series 1) very good cosmetics We will clean and add photos after 8/14/24 purchased from original owner in 8/24 Learn More

VPI Classic 3 tonearm price without base, available separately if needed last stainless model 10" from vpi (replacement for jmw 10.6 Learn More

VPI JMW 10" 3d tonearm and base Learn More

Cardas Ruby Heart $3500 retail Learn More

Bang & Olufsen 8002 turntable from the original owner with manual, excellent condition inside and outside, overhauled 5/18 with B&O MC3 cartridge This was a top of the line table selling for $1600 in the 1980's. sold do not pay for Learn More

Vpi hrx with ads stainless steel clamp, outer ring, 3d 12" reference arm carbon finish arm. All packing and accessories We are VPI dealers also if there is any other model you are in the market for, inquire for pricing and availability at 8888504366 Learn More

Music Hall MMF-5 local pickup preferred Learn More

Pro-Ject RPM10 220-240V Advanced sandwich construction of plinth with combination of MDF, carbon fibre and steel pellets • Plinth manufactured with thermo treatment • Mass loaded subchassis design with magnetic feet • 14,5kg Ground it Carbon equipment base included • Inverted main bearing with ceramic ball/plate • Extra-heavy acoustically inert aluminium platter with TPE damping and vinyl mat on the top • DC power supply with AC motor • Precise DC driven AC generator (Speed Box) built-in • Electronic speed control with 33/45 rpm switching • 78 rpm optional • Outboard motor construction with massive steel base • Pre-mounted 10“ tonearm 10 cc Evolution no cartrdige Learn More

Sota Sapphire Turntable with arm, serviced 11/18 Learn More

Specifications Cartridge Type Fixed Coil Stylus Type Elliptical Output High Available As Dual Coil Mono Yes Additional Specifications Stylus: Elliptical Titanium Bonded, 0.20mm Round Radius of curvature: 6 x 17 μm Cantilever: Aluminum Alloy Recommended Tracking force: 2.0 to 2.5 grams Effective tip mass: 0.55 mg Compliance: 10 μm/mN (low compliance) Frequency response: 20-20,000 Hz ± 2.5 dB Channel separation (stereo only): 1000 Hz >26 dB, 50-15,000 >20 dB Channel difference: <1.6 dB Output voltage: 2.12 mV Cartridge weight: 10.27 grams Loading: ≥ 47 kΩ FREE SHIPPING Learn More

Specifications Cartridge Type Fixed Coil Output High Available As Dual Coil Mono Yes Additional Specifications Stylus: Contact Line Nude, 0.100mm SQ selected for low noise Radius of curvature: OCL (Optimized Contour Contact Line) Cantilever: Ruby Recommended tracking force: 10mN / 1.0 gm (high), 13mN / 1.3 gm (medium) Effective tip mass: 0.30 mg Compliance: 28 μm/mN (high), 22 μm/mN (medium) Frequency response: 20-20,000 Hz ±1.0 dB Channel separation (stereo only): 1000 Hz >30 dB, 50-15,000 >25 dB Channel difference: <0.5 dB (Stereo), <1.0 dB (Mono) Output voltage (The Voice): 2.12 mV Cartridge weight: 6.8 grams Loading (The Voice): ≥ 47 kΩ Learn More

Clearaudio Concept with Performer V2 cartrdige Learn More

GOLDMUND T5 Linear Tracking arm (not table) Learn More

Thoress Phono Equalizer like new in 4/23 Learn More

Goldmund Studietto with T5 arm late version with factory box Learn More

Maplenoll Apollo turntable, rarely available former top of the line model, inquire.... We have the original pump. Learn More

Thorens TD126 mk iii with tonearm in 5/2017 The TD-126 by Thorens is the transcription turntable for discriminating music lovers and professional users. It is the product of 95 years experience in the construction of musical instruments allied to the mastering of the most advanced technology in the fields of fine mechanics and electronics. The main objectives of Thorens engineers remain unchanged: robustness, reliability and life-time maintenance of the original performance specification. In the constant battle against rumble, Thorens designed a servo controlled electronic belt-drive to associate with their unique floating suspension system. Thanks to this exclusive design, the TD-126 can claim rumble figures equalled by no other drive system. The TD126 mkI, mkII and mkIV use AC synchronous motors, while the TD126 mkIII uses a DC servo motor. Learn More

Nottingham Space Deck in from original customer 9/24 Learn More

Clearaudio Master Reference with Graham 2.7 tonearm Learn More