phono Cartridges

Dynavector DV-20X2H Learn More

best of the best., low hours Learn More

Soundsmith Carmen MKII medium compliance, high output 47k load 100-200pf in stock free ship, call for price at (888850-4366) Learn More

Cardas Ruby Heart $3500 retail Learn More

Specifications Cartridge Type Fixed Coil Output High Available As Dual Coil Mono Yes Additional Specifications Stylus: Contact Line Nude, 0.100mm SQ selected for low noise Radius of curvature: OCL (Optimized Contour Contact Line) Cantilever: Ruby Recommended tracking force: 10mN / 1.0 gm (high), 13mN / 1.3 gm (medium) Effective tip mass: 0.30 mg Compliance: 28 μm/mN (high), 22 μm/mN (medium) Frequency response: 20-20,000 Hz ±1.0 dB Channel separation (stereo only): 1000 Hz >30 dB, 50-15,000 >25 dB Channel difference: <0.5 dB (Stereo), <1.0 dB (Mono) Output voltage (The Voice): 2.12 mV Cartridge weight: 6.8 grams Loading (The Voice): ≥ 47 kΩ Learn More

Specifications Cartridge Type Fixed Coil Stylus Type Elliptical Output High Available As Dual Coil Mono Yes Additional Specifications Stylus: Elliptical Titanium Bonded, 0.20mm Round Radius of curvature: 6 x 17 μm Cantilever: Aluminum Alloy Recommended Tracking force: 2.0 to 2.5 grams Effective tip mass: 0.55 mg Compliance: 10 μm/mN (low compliance) Frequency response: 20-20,000 Hz ± 2.5 dB Channel separation (stereo only): 1000 Hz >26 dB, 50-15,000 >20 dB Channel difference: <1.6 dB Output voltage: 2.12 mV Cartridge weight: 10.27 grams Loading: ≥ 47 kΩ FREE SHIPPING Learn More

Cello Chorale by Miyab (used with Cello Zarathustra turntable by original owner Haruo Takeda the creator of the Miyabi phonograph cartridges also built this one and others for various manufactures such Mark Levinson, Krell, Cello, Red Rose and Mofi. Very rare Learn More

Sumo II moving coil cartridge from the estate of someone who built very high end tonearms in the industry very rare 2 available price for each with original box/papers on one specs found online: Extremely low Mechanical "Q" as a result of its perfectly balanced cantilever assembly which has an absolute minimum of ringing when subjected to high velocity accelerometer tests. Specially tapered aluminum alloy cantilever-Many were tried, including Beryllium Oxide, etc.. however the tapered aluminum had the least amount of tortional resonances which was a big problem in previous designs. Optimum stylus geometry-The stylus is Elliptical with a size of .2 mil x .6 mil. After much experimental work, it has been found that this shape is optimum in order to provide the lowest amount of groove noise and chatter while maintaining tracking ability in the inner grooves. High Density Ferrite magnet- Found to be an improvement over High Energy Samarium Cobalt magnet in previous designs. DC RESISTANCE-16 Ohms Impedance-16 Ohms Load resistance- 1000 Ohms minimum Channel separation- 27db (1 kHz) Gross weight-5.6 grams Output terminal pin diameter- 1.2 mm Stylus Force-1.6-2.0 grams Vertical angle-2.0 deg. Learn More

Monster Cable Genesis 1000 Alpha One owner since new Learn More