Power Amplifiers

Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 107dB Dimensions: 425 x 170 x 285mm Weight: 16kg Learn More

Plinius 8200P Stereo Power Amplifier Black Very Good Condition Learn More

Damping factor into 8 36 Signal to noise ratio ref 100W 8 A-weighted 111dB Signal to noise ratio ref 1W 8 A-weighted 91dB Input signal for clipping 1V RMS Peak current into 1 (1kHz 1mS) +/-28 amps peak (780W peak power) Burst power 2 300 Watts 2 @1% THD+N (1kHz for 20mS, repeat 500mS IHF) Audio Inputs 2 x True balanced via XLR, 47k 34k singled ended via legacy adaptor lead Audio Outputs Crosstalk 60 dB THD + N at 2/3rds full power 8 @1kHz (0.013%) Power Output 100 Watts 8 @0.1% THD+N (100W @0.1%) 190 Watts 4 @1% THD+N Frequency Response -3dB @ 1.4Hz to 100kHz Gain +29 dB Physical Weight 37.04lbs (16.8kg) Dimensions (HxWxD) 35/8x17x121/2" (9.15x43.2x31.75cm) Power Mains Supply 115V or 230V, 50/60Hz Power Consumption Passive consumption: 26W (idle) Standby consumption: <0.5W Product Type Type Power Amplifier Learn More

Mark Levinson ML20 shippiing price is double the ship quote Learn More

Power output: 100 watts (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 3% Signal to noise ratio: 95dB Speaker load impedance: 2Ω to 8Ω Valve complement: 4 x EL34, 2 x 12AT7 Dimensions: 400 x 300 x 180mm Weight: 22kg Learn More

sold 12/23 another kav500/5 available 1/24 Krell KAV-500/5 Krell KAV-500 Multichannel Amplifier 100 Watts/Channel into 8 Ohms, 200 Watts into 4 Ohms 400 Watts/Channel bridged (2 channels) Mfr FR 20 Hz - 20 kHz ± 0.5 dB THD < 0.03% Input Impedance 100 kOhms Size: 6.25" H x 19" W x 17" D Weight: 47 pounds Learn More

Like new condition all packing and accessories Frequency response 20 Hz to 20 kHz +0, –0.08 dB <0.5 Hz to 100 kHz +0, –3 dB Signal-to-noise ratio >95 dB, wideband, unweighted, referred to full power output >115 dB, “A”-weighted Gain 26.2 dB Total harmonic distortion <0.04% at 1 kHz, at 200 W, 8 Ω <0.15% at 20 kHz, at 200 W, 8 Ω Input impedance Single-ended: 100 kΩ Balanced: 200 kΩ Input sensitivity Single-ended or balanced: 1.96 V RMS Output power 200 W RMS at 8 Ω 360 W RMS at 4 Ω Output voltage 113 V peak-to-peak 40 V RMS Output current 13.4 A peak Slew rate 40 V/μs Output impedance <0.015Ω, 20 Hz to 20 kHz Damping factor >530, 20 Hz to 20 kHz, referred to 8W Power consumption Standby: 1 W Idle: 182 W Maximum: 2100 W Heat output Standby: 3.4 BTU/hr. Idle: 623 BTU/hr. Maximum: 7182 BTU/hr. Inputs 5 single-ended via RCA connector 5 balanced via XLR connector Outputs 5 pairs binding posts Dimensions 17.1 in. W x 7.65 in. H x 21.10 in. D 434 mm W x 194 mm H x 536 mm D Weight 95 lbs., 43.2 kg (shipping) 85 lbs., 38.6 kg (unit only) Learn More

VTL MB-185 Monoblock Power Amplifier Output Power: Tetrode = 230 Watts Triode = 120 Watts T.H.D. 20 Hz - 20 kHz @ 230W: Tetrode = < 2.5% T.H.D. 20 Hz - 20 kHz @ 120W: Triode = < 2.5% Input Sensitivity @ 125 W: 1.7 V Input Impedance: 130,000 Ohms Optimum Load Range: 2 - 8 ohms S/N Ratio @ 125W, tetrode: -110 dB, 120 HZ S/N Ratio @ 60W, triode: -110 dB, 120 Hz Power Consumption: Idle = 180 W Full Power = 600 W Primarv Mains Fuse Rating: 100/120V = 10A Ceramic Slo Blo 220/240V = 5A Ceramic Slo Blo B+ Fuse Rating: 1A ceramic Slo Blo Dimensions - EACH: W = 19 inches (48cm) D = 12 inches (26cm) H = 9 inches (23cm) Weight - EACH: 56 lbs (25Kg) per monoblock {total 65 lbs (30 Kg) packed} Learn More

Air Tight ATM1 with brand new tube set tube set in new in the box, not the ones in the picture. Learn More

Crown SA 2 Distinction Series Amplifier Very Good Condition Learn More