High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

Power Amplifiers

Grid  List 

Items 1 to 50 of 210 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page
  • Krell Showcase 5 channel  upgraded in silver or black

    Krell Showcase 5 channel upgraded in silver or black

    Krell 5 channel Showcase amplfiier In silver or black capacitors have been upgraded so this sounds like new and Krell modification performed to eliminate high standby idle (allowing for longer lifespan) performed. Will ship in your desired voltage. Krell box/packing. Excellent condition We are authorized Krell dealers Showcase 7 Showcase 6 Showcase 5 FREQUENCY RESPONSE 20 Hz to 20 kHz 20 Hz to 20 kHz 20 Hz to 20 kHz +0 dB, -0.15 dB +0 dB, -0.15 dB +0 dB, -0.15 dB .2 Hz to 95 kHz .2 Hz to 95 kHz .2 Hz to 95 kHz +0 dB, -3 dB +0 dB, -3 dB +0 dB, -3 dB SIGNAL TO NOISE RATIO >110 dB >110 dB >110 dB “A” WEIGHTED GAIN 26.2 dB 26.2 dB 26.2 dB TOTAL HARMONIC 1 kHz < 0.03% 1 kHz< 0.03% 1 kHz < 0.03% DISTORTION (THD) 20 kHz < 0.20% 20 kHz< 0.20% 20 kHz < 0.20% INPUT IMPEDANCE 45 kOhms 45 kOhms 45 kOhms INPUT SENSITIVITY 1.55 Vrms 1.55 Vrms 1.55 Vrms OUTPUT POWER 8 Ohms 125 W 8 Ohms 125 W 8 Ohms 125 W EACH CHANNEL DRIVEN 4 Ohms 250 W 4 Ohms 250 W 4 Ohms 250 W OUTPUT VOLTAGE Peak to Peak 90 V Peak to Peak 90 V Peak to Peak 90 V RMS 32 V RMS 32 V RMS 32 V POWER CONSUMPTION Stand-by 90 W Stand-by 80 W Stand-by 70 W Idle 150 W Idle 130 W Idle 110 W Max. 1600 W Max. 1400 W Max. 1200 W INPUTS 7 single-ended 6 single-ended 5 single-ended via RCA connectors via RCA connectors via RCA connectors 7 balanced 6 balanced 5 balanced via XLR connectors via XLR connectors via XLR connectors OUTPUTS 7 channels via 5-way 6 channels via 5-way 5 channels via 5-way binding posts binding posts binding posts REMOTE CONNECTORS 12 VDC Out 12 VDC Out 12 VDC Out (12 V trigger) (12 V trigger) (12 V trigger) via a 3.5 mm connector via a 3.5 mm connector via a 3.5 mm connector DIMENSIONS INCHES 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d 17.3w x 5.7h x 19.8d CENTIMETERS 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d 43.9w x 14.5h x 50.3d WEIGHT SHIPPING 68 lb., 30.8 kg 66 lb., 29.9 kg 64 lb., 29.0 k Learn More
    $1,650.00

  • Goldmund 8.5 with a2 modules
    $2,950.00

  • Krell S-1500 7 channel  Freshly recapped, six month warranty

    Krell S-1500 7 channel Freshly recapped, six month warranty

    Krell S-1500 7 channel Freshly recapped, six month warranty, with all updates, Excellent cosmetics Learn More
    $3,100.00

  • Red Rose M1  220-240 volt only

    Red Rose M1 220-240 volt only

    Hook up with your favorite surround processor or used to biamp. The transformer on this is originally set for international voltage and will not work at 100-120hz. Low shipping rates to the world. Learn More
    $2,000.00

  • Classe Sigma 5

    Classe Sigma 5

    Classe Sigma 5 $5000 USA retail nformation The Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages. A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes. The Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages. A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes. Specifications Details All tests un-weighted and 20Hz - 20kHz measurement bandwidth used. Frequency response 10Hz - 20kHz, -1dB into 4Ω Output power 200W rms into 8Ω All channels driven 400W rms into 4Ω Any two channels driven* Harmonic Distortion 0.018% @ 1kHz All channelsdriven to 1/8th power into 8Ω Peak Output Voltage 113V peak to peak, 40V RMS no load 113V peak to peak, 40V RMS into 8Ω Input Impedance 100kΩ Balanced / 50kΩ SE Voltage gain 29 dB Input level at clipping 1.4Vrms Balanced/SE Intermodulation Distortion >80 dB below fundamental into 8Ω SE Signal to Noise Ratio -100 dB at peak output into 8Ω (AES17) Rated power consumption 200W @ 1/8th power into 8Ω Mains voltage 100V - 240V, 50/60Hz Overall Dimensions Width: 17.00" (433mm) Depth (excluding connectors): 14.57" (370mm) Height: 3.75" (95mm) Net weight 23.1 lb (10.48 kg) *each channel supports 400W output into 4 ohms but the AC Mains/power supply cannot support all channels driven simultaneously at this level, which would require over 2,500W and only occur under a special test condition. Every channel easily drives lower impedance loads. Learn More
    $2,500.00

  • Bryston 6b  Stereo Amplifier
    $860.00

  • Mcintosh MC7106 six channel

    Mcintosh MC7106 six channel

    Mcintosh MC7106 six channel beautiful condition factory box ordered 12/1/23 can ship when arrives. Learn More
    $1,775.00

  • Cinenova 7 seven channel

    Cinenova 7 seven channel

    Cinenova 7 seven channel in 4/22 Learn More
    $2,500.00

  • Rotel RMB-1512 12 channel amplifier

    Rotel RMB-1512 12 channel amplifier

    Rotel RMB-1512 in 2023 tested $3000 retail Product highlights: 100 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with all channels driven 200 watts per channel into 4 ohms input linking, input mono switch and signal output link for system configuration flexibility Class D design with thermal and overcurrent protection circuitry frequency response: 10-40,000 Hz (±1dB) signal-to-noise ratio: 109 dB detachable power cord Connections: stereo RCA link input and output for daisy-chaining multiple amplifiers or other components six zone buses, each including: one unbalanced stereo RCA input pair four-pin Euroblock connector input source switch (mono summing in zones 1 and 2 only) left and right 5-way binding post terminals 3.5mm 12-volt trigger in/out with signal sensing switch Learn More
    $1,500.00

  • Meridian 857

    Meridian 857

    Meridian 857 two years old when we received as new condition in original packaging. 2 available, price for each "Our most powerful reference two channel amplifier has been designed and built to deliver the best possible Hi-Res audio performance from any high-quality passive loudspeaker system. Its low-feedback construction provides ultra-low distortion, ensuring an unparalleled level of clarity and transparency across the audible range. Bridgeable to over 1.5Kw, the Meridian 857 features a totally new design for a Meridian power amplifier, borne out of extensive research, experience and a thorough understanding of psychoacoustic principles." Learn More
    $6,999.00

  • Fourier Triomphe OTL sold ?

    Fourier Triomphe OTL sold ?

    Fourier Triomphe OTL large tubed amplifier sold ? http://www.one-electron.com/Fourier.html Learn More
    $2,000.00

  • Perreaux 6100 6 channel amplifier

    Perreaux 6100 6 channel amplifier

    Specifications: Power Output Unbridged 6 x 120Wrms continuous, driven into 8Ω from 20Hz to 20kHz at no more than 0.015% Total Harmonic Distortion 160Wrms per channel into 4Ω Bridged 3 x 275Wrms continuous, driven into 8Ω from 20Hz to 20kHz at no more than 0.04% Total Harmonic Distortion Frequency Response ........................................................................................20Hz-20kHz ±0.75dB .....................................................................................................................-3dB @ 6Hz and 120kHz Total Harmonic Distortion (unbridged) Rated power ..............................................................................................................0.005% @ 1kHz Worst case prior to clipping...................................................................................................... 0.04% Dynamic Headroom...................................................................................................................2.5dB Damping Factor............................................................................................................. 600 @ 100Hz ......................................................................................................................................... 400 @ 1kHz Noise (inputs shorted, A weighted)............................................................................................. -97dB Input Sensitivity .......................................................................................................................1.0Vrms Input Impedance ........................................................................................................................ 47kΩ Dimensions Width...........................................................................................................................440mm (17.5”) Height............................................................................................................................177mm (7.0”) Depth...........................................................................................................................430mm (17.0”) Weight..........................................................................................................................20.0kg (44.0lb) Learn More
    $995.00

  • Luxman M-10X

    Luxman M-10X

    Luxman M-10X like new condition, factory packing and all Spec Rated output 150W + 150W (8Ω)/at stereo 300W + 300W (4Ω)/at stereo 600W (8Ω)/at monaural Instantaneous max. output 1,200W + 1,200W (1Ω)/at stereo 2,400W (2Ω)/at monaural Input sensitivity 1.24V/150W (8Ω) GAIN 29.0dB Input impedance Unbalanced 51kΩ Balanced 28kΩ Frequency response 20Hz to 20kHz (+0, -0.1dB) 1Hz to 130kHz (+0, -3.0dB) Total harmonic distortion 0.003% or less (1kHz/8Ω) 0.04% or less (20Hz to 20kHz/8Ω) S/N ratio (IHF-A) 117dB Amplification feedback circuit LIFES 1.0 Output configuration 3 stage Darlington 4 paralleled push-pull Damping factor 600 Power consumption 540W 290W (under no signal) 1.0W (at standby) External dimensions 440(W) x 224(H) x 488(D) mm front side knob of 2mm and rear side terminal of 38 mm included in depth Net weight 48.4kg Accessories Trigger cable (Modular/3.5mm Monaural) Power cable Speaker terminal Supported Y-lug terminal dimension Width of part a: 15mm or less Width of part b: 8mm or more * Connection may not be performed depending on the shape of the Y-lug terminal. Download $20000 USA retail Learn More
    $13,000.00

  • Krell Trigger Converter 12pin in to 5 pin out

    Krell Trigger Converter 12pin in to 5 pin out

    Krell Trigger Converter 12pin in to 5 pin out Learn More
    $399.00

  • Mark Levinson 33h mono pair

    Mark Levinson 33h mono pair

    Mark Levinson 33h mono pair recapped all caps except large filter capacitors (rarely go bad, long life) and changed the relays. 9/2023 custom crated, inquire for freight options Learn More
    $10,800.00

  • Krell 402

    Krell 402

    Krell 402 silver (1 available 6/22) We can provide this in any voltage worldwide. Black (1 available 11/22) Learn More
    $4,999.00

  • Bedini BA-803  2 available Class A operation 250 watts/channel

    Bedini BA-803 2 available Class A operation 250 watts/channel

    Bedini BA-803 2 available excellent cosmetics, unused last twenty years. Original boxes. 250 watts Class A Operation Learn More
    $1,399.00

  • Kenwood L-07 monoblocks

    Kenwood L-07 monoblocks

    Kenwood L-07 For repair, selling the pair as is classics Power output: 150W into 8Ω (mono) Frequency response: 1Hz to 50kHz Total harmonic distortion: 0.008% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 120dB Speaker load impedance: 4Ω to 16Ω Dimensions: 200 x 155 x 390mm Weight: 13kg Learn More
    $999.00

  • Plinius 8200P MKII stereo amplifier (4 available)

    Plinius 8200P MKII stereo amplifier (4 available)

    Plinius 8200P MKII stereo amplifier (4 available) Learn More
    $1,750.00

  • PS Audio 200C (3 available)

    PS Audio 200C (3 available)

    PS Audio 200C (3 available) we need to service/upgrade these before shipping Learn More
    $800.00

  • Sunfire Cinemagrand Signature 400

    Sunfire Cinemagrand Signature 400

    Sunfire Cinemagrand Signature 400, new capacitors in the power supply Learn More
    $2,200.00

  • Goldmund A2 modules (original, new gold)

    Goldmund A2 modules (original, new gold)

    Goldmund A2 modules (original, new gold) I purchased these sequential modules from the former Goldmund distributor they are a NOS (new old stock pair) Learn More
    $2,300.00

  • Lexicon 501 same as Bryston 7Bst

    Lexicon 501 same as Bryston 7Bst

    Lexicon 501 same as Bryston 7Bst 500 watts/channel one mono amplifier Learn More
    $1,150.00

  • Dynaco Stereo 120 (3) and PAT 4 preamp

    Dynaco Stereo 120 (3) and PAT 4 preamp

    You can purchase each item individually. We have one 120 that we just replaced the coupling caps and resoldered the board as needed. That's $250 Inquire The Dynaco Stereo 120 is an all silicon transistor basic power amplifier for use with separate preamplifiers such as the Dynaco PAT-4 or PAT-5, or for use with tape recorders or tuners such as the FM-5 or AF-6, which have their own volume controls. The unit contains two 60 watt amplifiers on one chassis with a common power supply. Although the Stereo 120 is a solid state device, containing transistors and similar semiconductors, it has been designed to be used under normal conditions without special safety precautions, just as if it were a high grade tube amplifier. Thus it can be connected to source and speaker components and used with confidence in all conventional arrangements. There are no circuit breakers, speaker fuses, or other resettable devices to impede the use of the Stereo 120 under any reasonable conditions of use or abuse. This is achieved by using novel circuits (on which patents are pending) which automatically and instantly protect the amplifier. Specifications Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.5% Damping factor: 40 Input sensitivity: 1.5V Signal to noise ratio: 95dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 15 x transistors, 15 x diodes Dimensions: 13 x 10.5 x 4 inches Weight: 20lbs Learn More
    $770.00

  • Moon SimAudio 888 Mono Amplifiers

    Moon SimAudio 888 Mono Amplifiers

    Moon SimAudio 888 Mono Amplifiers Cost no object design i $120000 retail Approximately one year old , as new in the flight cases Inquire for freight options Learn More
    $68,000.00

  • Bryston 9B ST

    Bryston 9B ST

    Bryston 9bst 3 channel version with 2 channels of Lexicon added Learn More
    $1,500.00

  • Krell FPB250M mono EACH AMP

    Krell FPB250M mono EACH AMP

    Krell FPB250M excellent like new cosmetics Recapped! factory boxes MULTIPLE AVAILABLE Power output: 250W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Gain: 26.4 dB Input sensitivity: 2.14V Signal to noise ratio: 114dB Dimensions: 318 x 267 x 406mm Weight: 31kg Learn More
    $2,600.00

  • Conrad Johnson Premier 8 XS

    Conrad Johnson Premier 8 XS

    Conrad Johnson Premier 8 XS recently factory checked with newer tubes in 4/23 in 6/23 must ship by truck Learn More
    $6,500.00

  • Carver Silver Seven 4 chassis  mono amplifiers

    Carver Silver Seven 4 chassis mono amplifiers

    Carver Silver Seven 4 chassis mono amplifiers Learn More
    $17,000.00

  • Manley Reference 350 tube mono amplifiers recapped 2024

    Manley Reference 350 tube mono amplifiers recapped 2024

    Manley Reference 350 tube mono amplifiers both recapped 3/24 specs: Description: All-tube monoblock power amplifier. Non-inverting circuitry. Power output: 350W into 3 to 16 ohms (25.4dBW). THD: not specified, but claimed to be around 0.25% at full output. Power response: 10Hz–25kHz at 350W. Frequency range: 5Hz–50kHz. Input impedance: 130k ohms. Sensitivity: 750mV at minimum feedback. Power consumption: 500W. Dimensions: 19" W by 13" D by 9" H, overall. Weight: 80 lbs.each amp unboxed shipping weight is times 2 boxes Learn More
    $4,000.00

  • Krell FPB600

    Krell FPB600

    Krell FPB600 just recapped 12/23 excellent cosmetics We will crate this for shipment outside of the I95 corridor for an extra $225. 225lb shipping weight, inquire for freight options Learn More
    $5,999.00

  • Audio Research D52B

    Audio Research D52B

    solid state amplifier, unused in over 20 years, very nice condition, tech checked 11/16 50 watts per channel minimum RMS (both channels operating) at 8 ohms from 1 Hz to 20 kHz with less than .25% total harmonic distortion. Typically less than .02% at rated power in midband. Approximate actual power available per channel at "clipping" (both ch. op.): 80 (4 ohms), 60 (8 ohms), 35 (16 ohms) Power bandwidth Frequency response 0.05 Hz to 100 Khz (-3 db) Input sensitivity 1.1 Volts RMS for rated power and load. Input impedance 30 Kohms (nominal). Output taps Output regulation Overall negative feedback Damping factor More than 500 at rated power and load (20 Hz to 20 kHz). (Effective internal impedance approximately .012 ohms.) Distortion Intermodulation distortion: Less than .1% at rated output (56.56 V p to p) and load (SMPTE method). THD and IMD both decrease with decreasing output. Slew rate Rise time Hum & noise Wide-band, unweighted, more than 90 dB below 50 watts at 8 ohms - power line components (hum) more than 80 dB below 50 watts at 8 ohms. Power supply energy storage Power requirements 105-120/210-240 VAC, 50/60 Hz, 600 watts maximum. 120 watts at idle. 300 watts at rated power. Other Dimensions 19" (48 cm) W x 5 ¼" (13 cm) H (standard rack mount panel size) x 10 ½ (26.7 cm) D (front panel back). Handles extend 1 ½" (3.8 cm) forward of the front panel. Weight 39 lbs. (17.7 kg) Net, 45 lbs. (20.5 kg) Shipping Learn More
    $1,300.00

  • Proceed Amp3
    $850.00

  • Linn Knekt-A Room Amp

    Linn Knekt-A Room Amp

    Linn Knekt-A 3 available price is for each Learn More
    $200.00

  • Cary Audio 805AE NEW!

    Cary Audio 805AE NEW!

    Cary Audio 805AE pair with fancier anthracite black transformers cans instead of the standard flat black. NEW! full factory warranty These must be send by truck within the USA and FEDEX/UPS internationally. Please inquire for a freight quote, usually $250-300 domestically. The picture shown is just a stock photo. The amp are at the Cary factory Learn More
    $8,999.00

  • PS Audio GCC-100

    PS Audio GCC-100

    one owner, with remote The GCC-100 is a stereo, 100 watt per channel Control Amplifier that produces 200 watt per channel into 4 Ohms and drives speaker loads as low as 1.5 Ohms. It has a damping factor that exceeds 1000 and is capable of driving any moderate loudspeaker to live orchestral crescendo levels. The GCC-100 has an input impedance of 47K Ohms, and features 4 RCA and 1 XLR balanced input and an auxilliary output to drive another amplifier or a subwoofer. It can be remotely turned on/off with a simple 12 volt trigger or the supplied remote control, is a fully balanced amplifier with noise levels low enough that you’ll have to place your ear next to the tweeter to even hear if it’s working. The GCC-100 is a perfect music center for the most discerning stereo system and has the best midrange and top end of any of the three models (although they're all great) Learn More
    $900.00

  • Cary Audio 805RS latest version $16000 retail

    Cary Audio 805RS latest version $16000 retail

    Cary Audio 805RS latest version $16000 retail, new full warranty. Make sure you only buy from an authorized dealer (we buy directly from the manufacturer()so you get the manufacturer's warranty. You have your choice of silver or black. Priced to low to advertise/please phone or leave your number and we will call you back The weight in the crates is 140lbs each box, 33x19x17 The shipping calculator here would be double. inquire for shipping price worldwide Learn More
    $8,800.00

  • Balanced Audio VK75SE
    $3,500.00

  • Cello HTA-3  3 channel amplifier

    Cello HTA-3 3 channel amplifier

    Cello HTA-3 channel amplifier 200 watts / channel x 3 channels, rare Learn More
    $3,999.00

  • Mcintosh 2205 new restoration from original owner.

    Mcintosh 2205 new restoration from original owner.

    Mcintosh 2205 just recapped replaced amp coupling caps Original owner on all. Wood case $350 plus shipping extra. Power output: 200 watts per channel into 8Ω (stereo), 400W into 8Ω (mono) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.1% Damping factor: 16 Input sensitivity: 0.75V Signal to noise ratio: 95dB Speaker load impedance: 1Ω to 8Ω Learn More
    $1,999.00

  • Krell Solo 375XD mono amplifiers sold

    Krell Solo 375XD mono amplifiers sold

    Krell Solo 375XD mono amplifiers like new condition, all packing and accessories sold Retail $25000/pair Learn More
    $12,000.00

  • Krell KAV-2250

    Krell KAV-2250

    Krell KAV-2250 silver with box last one, inquire to make sure still available Learn More
    $1,950.00

  • Krell Altair

    Krell Altair

    Krell Altair Reference $5500 low profile amplifier with separate power supply from the 1990's. Original boxes Designed as a reference amplifier for apartment sized systems. Power suppy caps just recapped. IN REPAIR Learn More
    $2,370.00

  • Parasound JC1 3 Available

    Parasound JC1 3 Available

    Parasound JC1 inquire with postal code for freight price for each to ship Learn More
    $4,500.00

  • Mark Levinson 383 integrated with remote

    Mark Levinson 383 integrated with remote

    Mark Levinson 383 with remote two available as of 6/23 Learn More
    $3,100.00

  • Lexicon ZX-7 300 watt 7 channel

    Lexicon ZX-7 300 watt 7 channel

    Lexicon ZX-7 300 watt 7 channel excellent condition, one owner Learn More
    $4,300.00

  • Sony TAN9000ES

    Sony TAN9000ES

    Sony TAN9000ES Two available...., Price is for each. Tested, no DC offset, works well Product Information The Sony TA-N9000ES amplifier provides over 115 watts RMS per channel for powerful and efficient audio quality. With a copper-plated chasis, this Sony amplifier is very durable and rugged. Although being rugged, this Sony 5 channel amplifier has a smooth faceplate with great controls. While providing so much power, the Sony TA-N9000ES has ample heatsinking capability that keeps it cool throughout its operation. To protect the power supply, this Sony 5 channel amplifier has a copper shield. The five amplifiers come with special output transistors that decrease the resonance of the unit. Moreover, this Sony amplifier has a short-signal, single-point earthing system that reduces distortion and simplifies the PWB design. Product Identifiers Brand Sony Model TA-N9000ES MPN TA-N9000ES Key Features Frequency Response 20 Hz - 20 kHz Number Of Channels 5 Tech Details RMS Power per channel at 4 ohms 115 Watt RMS Power per channel at 8 ohms 115 Watt THD (Total Harmonic Distortion) 0.01 % Remote Control Without Remote Control Bridgeable Bridgeable Learn More
    $650.00

  • VTL MB300 monoblocks rebuilt

    VTL MB300 monoblocks rebuilt

    VTL MB300 monoblocks, price per pair Rebuilt by Blackie Pagano with paperwork. Work well Description: Tubed monoblock power amplifier. Rated power: 300W (no load specified). Power bandwidth: not specified. Frequency response: not specified. Sensitivity: 775mV RMS. Source impedance: 0.1 ohm. Dimensions: 19" W by 10" H by 10" D. Weight: 75 lbs each. Learn More
    $3,650.00

  • Wyred 4 Sound M Amp  Monoblocks

    Wyred 4 Sound M Amp Monoblocks

    mAMP Features Utilizes latest generation (ASX2) ICEpower® audio technology 250w in 8Ω 430w in 4Ω External selectable mains voltage 115/230VAC Idle power consumption 9.5w Thermal protection Differential, fully balanced Over current protection Sound optimized soft clip Robust construction Standard 12V DC Trigger Machined and anodized aluminum front panel Gold Plated unbalanced (RCA) input Neutrix Balanced (XLR) input 3rd Generation fully balanced input stage with impedance of 100k Compact size (8"W x 3.5" x 8"D) 8 lbs. Covered by a 5 YEAR WARRANTY mAMP Specs Typical THD+N 8Ω (10W out): 0.002% Power Output 8Ω @ 0.2% THD+N: 250W Power Output 8Ω @ 1.0% THD+N: 277W Power Output 4Ω @ 0.2% THD+N: 430W Power Output 4Ω @ 1.0% THD+N: 460W Output Idle Noise: <125µV Frequency Response 20Hz-20kHz: ± 0.1db Lower Bandwidth: 1.5Hz (All Loads) Balanced Input Impedance: 100kΩ Unbalanced Input Impedance: 100kΩ Dynamic Range: 111db Gain: 30db Sensitivity: 1.31V Output Impedance: 0.018Ω Min Load: 3Ω Max Output Current: 30A Idle Power Consumption: 9.5W Standby Power Consumption: <0.5W Learn More
    $1,200.00

  • Marantz Model 9 original versions

    Marantz Model 9 original versions

    Marantz Model 9 original versions. These are in our facilities and are being carefully restored. The model 9 is a massive single channel 70 Watt amplifier proving just how much difference an amplifier can make in high quality reproduction. It's exceptional stability and low distortion, together with it's tremendous reserves of power, result in remarkably clean performance. Transient response is superb. Built in metered adjustments. Beautiful precision construction. For superior stereo or monoaural reproduction, America's leading make of quality components offers the finest amplifier made today. Specifications Power output: 70W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Damping factor: 17 Speaker load impedance: 4Ω to 16Ω Valve complement: 2 x ECC88, 1 x 6CG7, 4 x EL34 Dimensions: 15-3/8 x 8-1/4 x 10-1/2 inches Weight: 63lbs Learn More
    $15,000.00

Grid  List 

Items 1 to 50 of 210 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page