Power Amplifiers

Air Tight ATM1 with brand new tube set tube set in new in the box, not the ones in the picture. Learn More

AMC 2445 - 2/4 Channel Power Amplifier Power output: 90 watts per channel into 8Ω (stereo), 45 watts per channel into 8Ω (4 channels) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Damping factor: 100 Input sensitivity: 0.866V Speaker load impedance: 4Ω (minimum) Dimensions: 430 x 112 x 288mm Weight: 9.5kg Year: 2001 Learn More

Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 1Hz to 100kHz Total harmonic distortion: 1% Damping factor: 11 Gain: 23.5 dB Input sensitivity: 1.9V Signal to noise ratio: 95dB Speaker load impedance: 4Ω to 8Ω Valve complement: 8 x 6550C, 8 x 6922 Dimensions: 483 x 222 x 495mm Weight: 29.5kg Learn More

Audio Research VS110 2 available price is for each unused since 2014 in 11/2021 Given the enthusiastic response to the appearance and sonic peformance of the VS55, you will be happy to know that a more powerful version of this remarkable amplifier is now available: the VS110, rated at 100 WPC. This brings vacuum-tube musicality as only Audio Research can do it to a new power level and price. The chassis, circuit layout and feature set of the VS110 are almost identical to the VS55, but scaled up to accomodate the greater power output. The chassis itself measures 17 ½" W by 19" D, and features an anodized, natural-finish top plate labeled with tube location/type, output-tube bias access points and the inset Audio Research logo. The chassis front holds a rocker-style power switch and green LED "on" indicator. The chassis rear provides the 0-4-8 ohm 5-way binding posts, voltmeter test points for setting bias, a 12V in/out trigger and a detachable 14-gauge A.C. line cord with IEC socket. There are two matched pair of 6550C output tubes in each channel, fed by two 6NIP triode driver/followers, which in turn are fed by a single 6NIP input tube. Storage capacity of the bulk power supply is double that of the VS55 and uses the same type of fast, low-ESR Nichicon® capacitors. The simplicity and purity of the audio circuit is a proven performer, but now it can deliver more power for larger speakers in larger rooms. Like the VS55, the VS110 ships in one color /chassis configuration, black with natural anodized top plate. A perforated cage-type cover is optional, and must be ordered as a separate item. The sonic signature of the VS110 is very much like that of the VS55, but with more robust dynamics, greater bass impact and power, and a larger soundstage. With so much similarity between these two amplifiers, choosing the right amplifier is simple. The look, the feature set, the circuit types are identical: it is simply a question of how much power you need or want. The VS110 combines classic tube-amplifier appeal with robust power, genuine musicality and solid value. And don't forget Audio Research's unmatched record for long-term product support - a key measure of keeping customers satisfied, decade after decade. POWER OUTPUT 100 watts per channel continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 0.5% at 100 watts, below .05% at 1 watt. Approximate actual power available at "clipping": 120 watts (1kHz) (Note that the actual RMS power output is dependent upon both line voltage and "condition" ie: if power line has high distortion, maximum power will be affected adversely, although from a listening standpoint this is not very critical.) POWER BANDWIDTH (-3dB points) 10Hz to 40kHz FREQUENCY RESPONSE (-3dB points at 1 watt) 0.8 Hz to 40 kHz INPUT SENSITIVITY 1.1V RMS Single-ended for rated output. (28dB gain into 8 ohms) INPUT IMPEDANCE 100K ohms Single-ended OUTPUT TAPS 8 ohms, 4 ohms OUTPUT REGULATION Approximately 0.9dB 8 ohm load to open circuit OVERALL NEGATIVE FEEDBACK 12.7dB DAMPING FACTOR Approximately 11 DISTORTION 1kHz total harmonic distortion typically 0.5% at 100 watts, below .05% at 1 watt SLEW RATE 6 V/µs RISE TIME 10 µs HUM & NOISE Less than 0.2mV RMS - 103dB below rated output (IHF weighted, input shorted) POWER SUPPLY ENERGY STORAGE Approximately 332 joules POWER REQUIREMENTS 105-125VAC 60Hz (210-250VAC 50Hz) 620 watts at rated output, 900 watts maximum, 400 watts at "idle" TUBE COMPLEMENT (4 matched pairs) 6550EH power output, (5) 6N1P input and driver OTHER Output polarity: Non-inverting. Voltmeter test points for bias. 12 VDC in/out trigger. Detachable 14 gauge AC line cord with IEC socket. DIMENSIONS 17½" (44.5 cm) W x 7.9" (20.1 cm) H x 19" (48.3 cm) D. Rear connectors extend .88" beyond chassis WEIGHT 61 lbs. (27.7 kg) Net; 69 lbs. (31.4 kg) Shippin Learn More

B&K ST1400 MK II good cosmetics Learn More

Balanced Audio Technology REX In late 1/23 original box top of the line Learn More

Bob Carver VTA305 Black Beauty Monoblock Pair with original boxes in 1/23 Learn More

Cello Performance II amplifiers in 7/23 We will recap the amplifiers before shipping. very good condition, one owner since new Inquire for freight options Learn More

Power output: 250 watts per channel into 8Ω (stereo), 1000 watts into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: 1.6V Signal to noise ratio: 100dB Speaker load impedance: 4Ω (minimum) Dimensions: 19 x 20.75 x 8 inches Weight: 65lbs Learn More

Audiophile-grade 2 channel amplifier High-performance Class AB design Discrete high-current, bipolar output transistors Learn More

Crown SA 2 Distinction Series Amplifier Very Good Condition Learn More

Goldmund Telos 300 Stereo Power Amplifier Silver Excellent Condition Original Box And Accessories Learn More

Goldmund VSR Mononoblock Power Amplifiers Silver Faceplate Great Condition Learn More

JBL Synthesis S820 Stereo Power Amplifier Power-200 Watts Per Channel Color-Black Learn More

Jeff Rowland MC-6 6 channel silver, excellent Learn More

Jeff Rowland Model 7 two pairs in service 1/24 inquire. one pair silver, one pair The shipping must be quoted. Please send you postal code. Learn More

Krell Audio Standard 2 coming soon 2/22 recapped approximately 3 years ago must ship freight inquire before purchasing please Learn More

Like new condition all packing and accessories Frequency response 20 Hz to 20 kHz +0, –0.08 dB <0.5 Hz to 100 kHz +0, –3 dB Signal-to-noise ratio >95 dB, wideband, unweighted, referred to full power output >115 dB, “A”-weighted Gain 26.2 dB Total harmonic distortion <0.04% at 1 kHz, at 200 W, 8 Ω <0.15% at 20 kHz, at 200 W, 8 Ω Input impedance Single-ended: 100 kΩ Balanced: 200 kΩ Input sensitivity Single-ended or balanced: 1.96 V RMS Output power 200 W RMS at 8 Ω 360 W RMS at 4 Ω Output voltage 113 V peak-to-peak 40 V RMS Output current 13.4 A peak Slew rate 40 V/μs Output impedance <0.015Ω, 20 Hz to 20 kHz Damping factor >530, 20 Hz to 20 kHz, referred to 8W Power consumption Standby: 1 W Idle: 182 W Maximum: 2100 W Heat output Standby: 3.4 BTU/hr. Idle: 623 BTU/hr. Maximum: 7182 BTU/hr. Inputs 5 single-ended via RCA connector 5 balanced via XLR connector Outputs 5 pairs binding posts Dimensions 17.1 in. W x 7.65 in. H x 21.10 in. D 434 mm W x 194 mm H x 536 mm D Weight 95 lbs., 43.2 kg (shipping) 85 lbs., 38.6 kg (unit only) Learn More

Krell FPB350m single mono Learn More

Krell FPB700cx Fresh recap ready to ship 5/24 200lb shipping weight inquire for freight options We can voltage convert and ship this worldwide for an addition $250 conversion fee Learn More

sold 12/23 another kav500/5 available 1/24 Krell KAV-500/5 Krell KAV-500 Multichannel Amplifier 100 Watts/Channel into 8 Ohms, 200 Watts into 4 Ohms 400 Watts/Channel bridged (2 channels) Mfr FR 20 Hz - 20 kHz ± 0.5 dB THD < 0.03% Input Impedance 100 kOhms Size: 6.25" H x 19" W x 17" D Weight: 47 pounds Learn More

Krell KMA-100 MK2 Monoblocks Class A 100W/Channel Silver Learn More

Inputs: RCA and Balanced Power output: 200 watts per channel into 8Ω (stereo); 400w/ch into 4 ohms, 800w/ch into 2 ohms and 1600w/ch into 1 ohm Learn More

Krell KSA250 with KSA300s internal boards overhaul completed 8/23 Learn More

Krell KSA80B One owner all original excellent condition We can recap for $500 additional if desired before shipping. Later balanced version Learn More

Krell MRA mono amplifiers. The best Krell ever made. Only 50 were made I read somewhere. These were $150,000/pair when new. price is for both We have the crates. They are at the Krell factory and will ship there directly to your door after being recapped. As of 1/22 because of the worldwide pandemic situation the capacitors we prefer using are on backorder. So you may purchase these but we don't have an exact delivery date These are the best Krell amplifiers ever made. Incredible size and weight 770 lbs each in the crate. serial 10199070016 Learn More

Krell S-1500 5 Channel Amplifier Black Freshly recapped 5 Channel Amplifier Very Good Condition Original Box We also have a second black unit available 5/24 Based on a rock solid, linear power supply design, the S –1500 is virtually impervious to speaker demand or AC line fluctuations. A 1,500 VA toroidal transformer and robust, 80,000-microfarad array of quick -charging filter capacitors offer enormous energy storage, avail- able in an instant. This supply is designed for massive current delivery while maintaining an ultra-low noise profile. Surface mount technology is utilized in the amplifier channels to achieve the high circuit density required for wide bandwidth performance. Eight high- speed power devices per channel deliver 150 W into 8 Ohms and 300 W into 4 Ohms. The amplifier is stable at any load impedance. Krell Current Mode TM, fully balanced topologies, are utilized for all amplifier channels for the lowest noise and greatest detail retrieval. Class A circuitry is utilized in the input, pre -driver, and driver stages to provide the most accurate signal path. All channels support balanced and single -ended inputs. High quality, 5-way binding posts allow speaker connections via bare wires, spade lugs, or banana plugs. A modular platform provides an upgrade path for the S–1500/3, S –1500/5 and S –1500/6 amplifiers, enabling additional channels to be installed at any time. The base platform includes input and speaker connections for up to 7 channels, making upgrades a simple matter when desired. • 80,000 Microfarads of Filter Capacitance • 12 VDC Triggers • 17.3W,5.7H,19.8D Learn More

Krell Theater 7 XD $11000 retail Multi Channel Amplifier Color: Black Frequency response 20 Hz to 20 kHz +0, –0.11 dB Signal-to-noise ratio >101 dB, wideband, unweighted, referred to full power output >114 dB, “A”-weighted Gain 25.5 dB Total harmonic distortion <0.02% at 1 kHz, at 100 W, 8 Ω, two channels driven; <0.20% at 20 kHz, at 100 W, 8 Ω, two channels driven; Input impedance Single-ended: 27 kΩ; Balanced: 54 kΩ; Input sensitivity Single-ended or balanced: 1.50 V RMS Output power, per channel 120W RMS at 8 Ω, 2 channels driven 115W RMS at 8 Ω, 3 channels driven 110W RMS at 8 Ω, 5 channels driven 105W RMS at 8 Ω, 7 channels driven 210W RMS at 4 Ω, 2 channels driven 190W RMS at 4 Ω, 3 channels driven 165W RMS at 4 Ω, 5 channels driven 140W RMS at 4 Ω, 7 channels driven Output voltage 93 V peak-to-peak 33 V RMS Output current 10 A peak Output impedance <0.025 Ω, 20 Hz to 20 kHz Damping factor >320, 20 Hz to 20 kHz, referred to 8 Ω Power consumption Standby: 1 W Idle: 66 W Maximum: 2000 W Heat output Standby: 3.42 BTU/hr. Idle: 225 BTU/hr. Maximum: 2200 BTU/hr. Inputs 7 single-ended via RCA connector 7 balanced via XLR connector Outputs 7 pairs five-way binding posts Remote connectors One 12 VDC input (12 V trigger) via 3.5 mm jack Dimensions 17.1 in. W x 7.65 in. H x 21.10 in. D Weight 80 lbs. Learn More

Krell Theater Amp Standard , detachable cord, black, recapped five years ago Learn More

Marantz MM7055 5-Channel Power Amplifier Power output: 140 watts per channel into 8Ω (5 channels) Frequency response: 8Hz to 100kHz Total harmonic distortion: 0.09% Damping factor: 100 Gain: 29 dB Input sensitivity: 1.2V Signal to noise ratio: 105dB Dimensions: 440 x 183 x 384mm Weight: 15.7kg Learn More

Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 60kHz Total harmonic distortion: 0.1% Damping factor: 150 Input sensitivity: 1V Signal to noise ratio: 90dB Learn More

Mark Levinson 23.5 serviced 5/25 pics will be uploaded when complete recapped Learn More

Mark Levinson 331 recently serviced by factory authorized center Learn More

Mark Levinson 532h New in 2019 with receipt from authorized dealer for balance of factory warranty Excellent condition in factory box. Many of these for sale are much older out of warranty period. We also have a second one that recently came back from factory service Learn More

Mark Levinson ML20 shippiing price is double the ship quote Learn More

Mark Levinson No. 27 Stereo Power Amplifier Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 4Hz to 122kHz Total harmonic distortion: 0.1% Gain: 26 dB Dimensions: 444.5 x 407.8 x 185.6mm Year: 1989 75Lbs Learn More

Mark Levinson No. 27.5 Stereo Power Amplifier Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 4Hz to 122kHz Total harmonic distortion: 0.3% Gain: 26.9 dB Dimensions: 483 x 185 x 360mm Weight: 43.1kg Year: 1992 Learn More

McInstosh 240 Stereo Power Amplifier The MC240 has on one chassis two 40 watt power amplifiers. In addition to use as a stereo amplifier, the flexibility of the MC240 permits it to be used as a monophonic amplifier that delivers 80 watts, or as two separate 40 watt amplifiers with each channel amplifying completely separate programs, or as two amplifiers for use with an electronic crossover network. Specifications Power output: 40 watts per channel into 8Ω (stereo), 80 watts into 2Ω (mono) Frequency response: 16Hz to 40kHz Total harmonic distortion: 0.5% Input sensitivity: 0.5V Signal to noise ratio: 90dB Speaker load impedance: 4Ω to 16Ω Valve complement: 1 x 12AX7, 2 x 12AU7, 2 x 12BH7, 2 x 12AX7, 4 x 6L6GC Dimensions: 17-1/4 x 10-3/4 x 8 inches Weight: 56lbs Finish: chromium and black Learn More

McInstosh MC1000 Mono Power Amplifier One amp works properly, one needs repair (we will get to it but then the price goes up) inquire for freight quote Power output: 1000 watts into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 200 Input sensitivity: 2.5V Signal to noise ratio: 115dB Speaker load impedance: 2Ω to 8Ω Dimensions: 264 x 438 x 511mm Weight: 47.6kg Learn More

Mcinttosh MC2002 200 watt channel must truck , if not local box must be ordered from Mcintosh Learn More

Mcintosh MC2301 Excellent condition original packing inquire for shipping to anywhere (141lbs each box x two boxes) $27000 retail Learn More

Mcintosh MC275 Original version vintage, 2 available as of 5/22 inquire (we must run these through the service department) Learn More

McIntosh MC30 Vintage Tube Monoblock Pair Beautiful Amplifiers Well Maintained Power output: 30 watts into 8Ω (mono) Frequency response: 20Hz to 30kHz Total harmonic distortion: 0.3% Damping factor: 12 Input sensitivity: 0.5V Signal to noise ratio: 90dB Speaker load impedance: 4Ω to 16Ω Valve complement: 2 x 6L6GC, 2 x 12AX7 1 x 12AU7, 1 x 12BH7, 1 x 5U4GA Dimensions: 13 x 8 x 8 inches Weight: 30.5lbs Finish: chrome and black Learn More

Mcintosh MC7150 sold ? 4/23 Learn More

Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 107dB Dimensions: 425 x 170 x 285mm Weight: 16kg Learn More

Music Reference RM200 MK II Learn More

Damping factor into 8 36 Signal to noise ratio ref 100W 8 A-weighted 111dB Signal to noise ratio ref 1W 8 A-weighted 91dB Input signal for clipping 1V RMS Peak current into 1 (1kHz 1mS) +/-28 amps peak (780W peak power) Burst power 2 300 Watts 2 @1% THD+N (1kHz for 20mS, repeat 500mS IHF) Audio Inputs 2 x True balanced via XLR, 47k 34k singled ended via legacy adaptor lead Audio Outputs Crosstalk 60 dB THD + N at 2/3rds full power 8 @1kHz (0.013%) Power Output 100 Watts 8 @0.1% THD+N (100W @0.1%) 190 Watts 4 @1% THD+N Frequency Response -3dB @ 1.4Hz to 100kHz Gain +29 dB Physical Weight 37.04lbs (16.8kg) Dimensions (HxWxD) 35/8x17x121/2" (9.15x43.2x31.75cm) Power Mains Supply 115V or 230V, 50/60Hz Power Consumption Passive consumption: 26W (idle) Standby consumption: <0.5W Product Type Type Power Amplifier Learn More

NAP 300 Power Amplifier And 300 Power Supply: Analogue Inputs: (2) XLR Input Impedance: 18k Ohms Speaker Outputs: (2) L & R, 4mm "banana" sockets Power output: Continuous, 8 Ohms: 90 Watts per channel Transient: 500VA Quiescent Consumption: 27VA Voltage Gain: +29dB Frequency response: -3dB @ 2Hz and 70kH Minimum Load Impedance: 2 Ohms Mains supply: 100-120V or 220-240V, 50/60Hz Dimensions (H x W x D): NAP 300 and the NAP 300PS - 87 x 432 x 314mm Shipping Specs for the NAP 300 Stereo Power Amplifier: Dimensions: 23” D x 19” W x 9” H Weight: 28 lb Shipping Specs for the NA PS300 Power Supply: Dimensions:23” D x 19” W x 9” H Weight: 39 lb Learn More

Nakamichi PA-1 Five-Channel Power Amp 5 channel amp at 100W per channel Uses either bare wire or banana connections to speakers RCA inputs for front (L/R), center (mono) and rear (L/R) Remote power on/off control 1/8" input and output Uses standard IEC power cable Dimensions: 17" x 16.5" x 8.5 Weight 48lbs Made In Japan Learn More