High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

solid state

Grid  List 

Items 1 to 50 of 88 total

Page:
  1. 1
  2. 2
per page
  • Adcom GFA5300

    Adcom GFA5300

    Adcom GFA5300 bench tested, works properly Learn More
    $175.00

  • Marantz MA500

    Marantz MA500

    Marantz MA500 Treat your family and guests to quality entertainment by using the Marantz MA-500 1 Channel Power Mono Amplifier. This unit is compact enough to be functional and stylish in practically any spot in a room. Able to deliver 125 watts into 8 ohms, this product is ideal for powering just about any speaker. In fact, it can create a new multi-channel home theater or provide an additional channel for amplifiers to an existing system. An RC-5 remote control also makes it possible for users to change settings without getting up from the comfort of their seats. This black amp weighs a mere 13.2 pounds, which makes it possible for users to move it easily from one spot to another. They measure 19 inches in depth by 3.5 inches in width by 6 inches in height.This Monoblock equipment is specifically designed for use in home theaters and surround-sound system setups. The 125-watt and 180-watt performance delivers high power into 8-ohm loads, ensuring that users don't lose signals even in challenging audio environments. A frequency response between 10 and 100K combines with a signal-to-noise ratio of less than 116 decibels, making it a practical choice for beginners who want a high-tech music solution that can easily synchronize with a variety of music systems and accessories. The product can be bridged at 8 ohms for a total of 360 watts.This isn’t just a reliable product for home theater and small professional setups. The amp also boasts an excellent reputation for its support for home computers, car subwoofers, speakers, and other accessories. In fact, these amps will never run out of breath. Marantz MA-500 1 Channel Power Amplifier can really provide a lot of RMS power. Buyers should not rule out flexible integration of these capable products because they can offer a pleasing experience when properly paired and tuned.This product delivers the kind of performance enthusiasts expect from the highest-end amp. It has plenty of reserve energy even when hooked up with some of the most modern speakers and receivers. As for performance, the sound quality will endure even at lows as low as 20 hertz. In addition, it will continue to show clear and precise mids and highs almost every time. Even non-audiophiles are likely to be impressed by the clear sound and amazing bass response. This is the kind of performance that’s sure to keep you on your toes. That’s particularly true when hooked up to phono preamplifier or even ma-9s2 block amps, receivers, advance stereo headphones, and other monoblock gear.Overall, the durability and audio quality of MA500 is sure to serve you well now, and even as audio technology advances. This is a great choice for casual listeners, audiophiles, and even professionals who want reliable equipment, small size, and high output. This is a sublime amplifier design that should satisfy even the most demanding listener. Product Identifiers Brand Marantz Learn More
    $188.00

  • Linn Knekt-A Room Amp

    Linn Knekt-A Room Amp

    Linn Knekt-A 3 available price is for each Learn More
    $200.00

  • Onkyo M-501 power amplifier

    Onkyo M-501 power amplifier

    Power output: 150 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.09% Damping factor: 60 Input sensitivity: 1V Signal to noise ratio: 100dB Dimensions: 455 x 150 x 350mm Weight: 10.5kg Learn More
    $249.00

  • Janis Interface 1A Electronic crossover amplifier

    Janis Interface 1A Electronic crossover amplifier

    Janis Interface 1A Electronic crossover amplifier Learn More
    $250.00

  • Rotel RB-1050

    Rotel RB-1050

    Rotel RB-1050 Ideal for demanding custom installations, the ultrastable RB-1050 combines audiophile sound quality and “bullet-proof” circuitry. A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and “auto on” signal sensing circuitry allows use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to “daisy chain” from a single source. The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt “trigger” jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis. Power Configurations: 2 x 70 watts Watts/Channel: all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD 70 watts THD (20-20,000Hz): cont. rated power one-half rated power one watt per channel 0.03%, maximum 0.03%, maximum 0.03%, maximum IM Distortion (at rated ower, 60Hz:7kHz = 4:1): 0.03%, maximum Damping Factor (8 ohms): 500 Input Sens. / Impedance: 1.0V / 33 kohms Frequency Response: 10-100kHz (±1dB) S/N Ratio (IHF A): 116dB Power Consumption: 250 watts Dimensions (W x H x D): 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8" Front Panel Height: 80 mm, 3.1" Learn More
    $285.00

  • Hafler DH220

    Hafler DH220

    Hafler DH220, only one left for sale The DH-220 circuit is a refinement of the DH-200 design, a Hafler landmark which has achieved worldwide recognition, and has elicited glowing reviews since its 1979 introduction. As in the DH-110 preamplifier, particular attention has been paid to component quality, using polypropylene or film capacitors wherever feasible, for example, for superior sound. Combining the latest power MOSFET technology with uniquely simple and effective circuit topology reduces distortion of all types, and at all power levels, over the full audio frequency spectrum, to the vanishing point. Specifications Power output: 115 watts per channel into 8Ω (stereo) Frequency response: 6Hz to 60kHz Total harmonic distortion: 0.02% Damping factor: 60 Input sensitivity: 1.55V Signal to noise ratio: 100dB Semiconductors: 26 x transistors, 8 x MOSfet, 29 x diodes, 4 x zener diodes, 1 x diode bridge Dimensions: 5-1/8 x 16 x 10-1/2 inches Weight: 26lbs Learn More
    $290.00

  • Bay Audio 500w PowerPack  digital subwoofer amplifier
    $300.00

  • Linn LK85 (2 available, price is for each)

    Linn LK85 (2 available, price is for each)

    Linn LK85 This model of Stereo Power Amplifier operates at 85W per channel up to 4 Ohms. The Linn amplifier is fully upgradeable, so users can update it when other components of their stereo systems are upgraded. There are four sets of speaker wiring on the Linn LK85, which makes bi-cabling convenient to put in place. The Linn amplifier is designed to conserve energy by going into sleep mode after 10 minutes of inactivity. This feature also preserves the circuitry, which can become damaged from frequently turning it on and off. The Stereo Power Amplifier is all black and is often referred to as the Black Box. There are no frills, and the basic look of the Linn LK85 allows it to go along with many other components of the stereo system without looking out of place. Key Features RMS Power at 4 Ohms x2 85 W RMS Power at 8 Ohms 62 W 115V Learn More
    $325.00

  • Kinergetics Subwoofer amplifier
    $380.00

  • Sonographe SA150 by Conrad Johnson

    Sonographe SA150 by Conrad Johnson

    Sonographe SA150 by Conrad Johnson Was $1000 retail, matching preamp available. Very musical Learn More
    $390.00

  • Krell Trigger Converter 12pin in to 5 pin out

    Krell Trigger Converter 12pin in to 5 pin out

    Krell Trigger Converter 12pin in to 5 pin out Learn More
    $399.00

  • Dynaco ST 150 power amplifier

    Dynaco ST 150 power amplifier

    Dynaco ST 150 power amplifier The Dynaco Stereo 150 is a basic two channel power amplifier employing all silicon semiconductors. They include 24 transistors, 2 zener diodes, 16 diodes, and 2 thermal sensors. The output circuitry is of the full complementary symmetry design. The entire amplifier, except for an input network, is direct coupled. It's measured distortion levels approach the threshold of much laboratory test equipment, not only at the commonly specified full power ratings, but more importantly at very low power outputs as well. This is the result of circuit techniques which eliminate any discernible crossover notch at low levels, and contributes to the Stereo 150's freedom from listening fatigue. It's accurate, uncoloured sonics have been achieved on a wide variety of loudspeaker loads, including electrostatics and multiple drivers with complex crossovers. The design of a very fine power amplifier implies the necessity of several protection techniques for the amplifier, and for the speaker load. In addition to the AC line fuse, four separate B+ fuses are supplied. Electronic volt-amp limiting ensures safe operation of the output transistors, and a thermal sensor mounted directly on each output stage reduces the input if high temperature occurs. An unusually large radiating area for the heat fins, which are coupled to an aluminium back panel, form a highly efficient heat sink. Speaker fuses protect the load. The Stereo 150 has been designed as two independent 75 watts (at 8 ohms) amplifying channels with a common power supply having a high degree of inherent regulation. In addition, where higher powers or higher volt-amp capabilities are required for lower load impedances, easy internal restrapping permits monophonic operation for 150 watts output (at 8 ohms). An accessory kit is planned at additional cost for two output meters and meter switching, which includes alternative inserts for the front panel. Specifications Power output: 75 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.25% Damping factor: 50 Input sensitivity: 1V Signal to noise ratio: 95dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 24 x transistors, 2 x zener diodes, 16 x diodes, 2 x thermal sensors Dimensions: 14.5 x 13.75 x 7 inches Weight: 29lbs Learn More
    $450.00

  • B&K Reference 125.2 Stereo Power amplifier

    B&K Reference 125.2 Stereo Power amplifier

    B&K Reference 125.2 Stereo Power amplifier 125 watts per channel stereo amplifier Black Retail 1200 Learn More
    $450.00

  • Krell Showcase surround processor

    Krell Showcase surround processor

    Krell Showcase surround processor, with remote and cord, six month parts and labor or exchange warranty $4500 new Learn More
    $595.00

  • Kenwood LO7 monoblocks

    Kenwood LO7 monoblocks

    classics \Power output: 150W into 8Ω (mono) Frequency response: 1Hz to 50kHz Total harmonic distortion: 0.008% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 120dB Speaker load impedance: 4Ω to 16Ω Dimensions: 200 x 155 x 390mm Weight: 13kg Learn More
    $650.00

  • Adcom GFA5500

    Adcom GFA5500

    Adcom GFA5500, very good cosmetics. bench tested Learn More
    $650.00

  • Tandberg TPA 3006a

    Tandberg TPA 3006a

    Tandberg TPA 3006a one owner since new, with manual Learn More
    $650.00

  • Linn LK-2 Amplifier

    Linn LK-2 Amplifier

    Linn LK-2 Amplifier Power output: 60 watts per channel into 8Ω (stereo) Learn More
    $699.00

  • JBL S400 stereo power amplifier

    JBL S400 stereo power amplifier

    JBL S400 stereo power amplifier Power output: 200 watts per channel into 8Ω (stereo), 400W into 8Ω (mono) Frequency response: 10Hz to 70kHz Total harmonic distortion: 0.02% Damping factor: 120 Input sensitivity: 1V Signal to noise ratio: 105dB Speaker load impedance: 4Ω (minimum) Dimensions: 5.5 x 19 x 16.5 inches Weight: 45lb Learn More
    $699.00

  • Thule Audio PA100 power amplifier

    Thule Audio PA100 power amplifier

    Thule Audio PA100 power amplifier Thule Audio is a Danish company, specializing in audio equipment, ranging from basic entry level models, to models which are High End stuff. The product line is well thought out, and as we shall see, very rationally conceived and executed. For other reviews of Thule Audio products, look over the site. Both cases are virtually identical, and share the overall look of the entire Thule Spirit range. They are made of uncommonly thick, heavy and well finished cases, while front panels are made from 8mm thick aluminium, machined so that they have a gentle slope. In the center, one will find a "gold" knob in case of the preamp, and a decoration in case of the amp. The preamp has an alphanumeric display above the knob, which provides the user with all relevant information on power on, volume and input status in red LEDs. All this is fully remote controllable, and a remote control unit is supplied. The power amp is a very simple affair, with only a red LED power on indicator on its front side. Both units have rocker power on/off switches at the back, as they're intended to be left in standby mode all the time. [Thule PR 100 inside view] Both units share much more common componentry that I would have imagined. Both use toroidal power supplies, where the amp's toroid is rated at 500VA, while the preamp's toroid is rated at 300VA. No, you're not seeing things, it's not a typo error, I did say 300VA. That's enough for a 2x75W/8 Ohm power amplifier, let alone a simple preamp. In fact, the preamp is EXACTLY the same as the IA60 integrated amplifier, minus the power amp circuitry and heat sinks. Put another way, the preamp consists of the preamp section of the IA60 integrated. Hence the 300VA toroidal transformer - that's what they use in IA60 (see review on this site). The power amp, on the other hand, is once more the same board, but minus the preamp circuitry and with heftier power supplies - bigger transformer, and 4x10.000uF capacitors, instead of just 2x10.000uF. This is no accident, this is rational thinking. Use the same board, use the same case, use the same power supplies and you increase the numbers of your serial production, thus pushing the cost per unit down. The only thing that spoils the show is the preamp's price - it's simpler than the integrated model, but it's not only not cheaper, it's actually somewhat more expensive. That is most odd, I must say - probably for "complex marketing reasons" (a phrase I first heard in the early seventies, and it's gotten worse since then). You still have 5 line level inputs, with no option for a phono RIAA board of any kind. You still don't have a headphone output - somebody should inform the Scandinavian audio industry that headphones have been invented some decades ago, they seem to have collectively overslept that event. As usual, all input and output sockets are gold plated. Like elsewhere in Thule's product portfolio, volume and balance are controlled by a ladder of laser trimmed resistors, contained within an LM1792 digital volume control, a good point - no mechanics, no wear and tear, no aging, unparalleled precision. The amp is rated at 2x100W/8 ohms and 170W/4 Ohms - that should be enough for most of us. It has an RCA Cinch and a balanced XLR input, just as the preamp has the same outputs. Acting on logic and Thule's recommendation, I used balanced lines to link the two, except when using other units. Learn More
    $699.00

  • Classe CA-101 power amplifier  sold

    Classe CA-101 power amplifier sold

    Power output: 100 watts per channel into 8Ω (stereo), 350W into 8Ω (mono) sold Frequency response: 20Hz to 20kHz Classe CA-101 power amplifier Total harmonic distortion: 0.03% Gain: 29.02 dB Input sensitivity: 0.95V Signal to noise ratio: 128dB Speaker load impedance: 4Ω (minimum) Dimensions: 482.6 x 362 x 139.7mm Weight: 15.45kg Learn More
    $749.00

  • Bryston 4b

    Bryston 4b

    In fair condition.. some scratches Description: Solid-state stereo power amplifier. Output power: 250W continuous into 8 ohms (24dBW), 400Wpc rms continuous into 4 ohms (23dBW); 800W continuous into 8 ohms in bridged mode (29dBW). Current delivery: 16A continuous, 48A peak, per channel. Frequency response: 1Hz–100kHz, ±3dB for 1W output. S/N Ratio: hum and noise, 108dB below rated output, 90dB IHF. Input sensitivity: 1.4V for 250Wpc into 8 ohms. Voltage gain: 30dB. THD+noise: 20Hz–20kHz, 0.01%. IM distortion (60Hz+7kHz, 4:1, SMPTE method): less than 0.01% at rated power. Damping factor: greater than 500 at 20Hz, at 8 ohms (equivalent to an output impedance of less than 0.016 ohms). Input impedance: 50k ohms unbalanced, 30k ohms balanced. Polarity: non-inverting. Dimensions: 16 3/16" (411mm) W by 7 1/8" (181mm) H by 13½" (343mm) D. Weight: 40.1 lbs (20.2kg) net. Learn More
    $750.00

  • Dynaco Stereo 120 (3) and PAT 4 preamp

    Dynaco Stereo 120 (3) and PAT 4 preamp

    You can purchase each item individually. We have one 120 that we just replaced the coupling caps and resoldered the board as needed. That's $250 Inquire The Dynaco Stereo 120 is an all silicon transistor basic power amplifier for use with separate preamplifiers such as the Dynaco PAT-4 or PAT-5, or for use with tape recorders or tuners such as the FM-5 or AF-6, which have their own volume controls. The unit contains two 60 watt amplifiers on one chassis with a common power supply. Although the Stereo 120 is a solid state device, containing transistors and similar semiconductors, it has been designed to be used under normal conditions without special safety precautions, just as if it were a high grade tube amplifier. Thus it can be connected to source and speaker components and used with confidence in all conventional arrangements. There are no circuit breakers, speaker fuses, or other resettable devices to impede the use of the Stereo 120 under any reasonable conditions of use or abuse. This is achieved by using novel circuits (on which patents are pending) which automatically and instantly protect the amplifier. Specifications Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.5% Damping factor: 40 Input sensitivity: 1.5V Signal to noise ratio: 95dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 15 x transistors, 15 x diodes Dimensions: 13 x 10.5 x 4 inches Weight: 20lbs Learn More
    $770.00

  • Mcintosh MC250

    Mcintosh MC250

    Mcintosh MC250 nice condition Mclntosh audio power ratings are in accordance with the Federal Trade Commission Regulation of November 4, 1974 concerning power output claims for amplifiers used in home entertainment products. POWER OUTPUT STEREO 50 watts minimum sine wave continuous average power output, per channel, both channels operating into 4 ohms, 8 ohms, or 16 ohms load impedance, which is: 14.1 volts RMS across 4 ohms 20.0 volts RMS across 8 ohms 28.3 volts RMS across 16 ohms MONO 100 watts minimum sine wave continuous average power output, operating into 2 ohms, 4 ohms, or 8 ohms load impedance, which is: 14.1 volts RMS across 2 ohms 20.0 volts RMS across 4 ohms 28.3 volts RMS across 8 ohms OUTPUT LOAD IMPEDANCE STEREO 4 ohms, 8 ohms, or 16 ohms; separate terminals are provided for each output MONO 2 ohms, 4 ohms, or 8 ohms; separate terminals are provided for each output RATED POWER BAND 20 Hz to 20,000 Hz TOTAL HARMONIC DISTORTION STEREO 0.25% maximum harmonic distortion at any power level from 250 milliwatts to 50 watts per channel from 20 Hz to 20,000 Hz, both channels operating MONO 0.25% maximum harmonic distortion at any power level from 250 milliwatts to 100 watts from 20 Hz to 20,000 Hz INTERMODULATION DISTORTION STEREO 0.25% if instantaneous peak power output is 100 watts or less per channel with both channels operating for any combination of frequencies 20 Hz to 20,000 Hz MONO 0.25% if instantaneous peak power output is 200 watts or less for any combination of frequencies 20 Hz to 20,000 Hz FREQUENCY RESPONSE (at 1 watt output) 20 Hz to 20,000 Hz +0 -0.25 dB 10 Hz to 100,000 Hz +0 -3.0 dB NOISE AND HUM 90 dB below rated output RATINGS OUTPUT VOLTAGES Stereo and Mono 25 volts for distribution lines DAMPING FACTOR 15 at 3 ohms output 38 at 8 ohms output 17 at 16 ohms output INPUT IMPEDANCE 200,00 Ohms INPUT SENSITIVITY 0.5 volt. Level control provided for higher input voltage GENERAL INFORMATION POWER REQUIREMENTS 120 volts, 50/60 Hz, 50 watts at zero signal output, 250 watts at rated output SEMICONDUCTOR COMPLEMENT 24 silicon transistors 18 silicon rectifiers and diodes MECHANICAL INFORMATION SIZE 7 1/16 inches high (17.94 cm), 105 /8 inches wide (26.99 cm), 155 /8 inches deep (39.69 cm) CHASSIS Chrome and black WEIGHT 36 pounds (16 Vintage Amplifier 50w/ch stereo. 100w mono. Response 20-20kHz (+0 -0.25dB). Learn More
    $800.00

  • Marantz sixteen 16
    $850.00

  • Conrad Johnson MF2200
    $850.00

  • Sumo Andromeda II

    Sumo Andromeda II

    Sumo Andromeda II Mint, our tech just went through this and readjusting dc offset, bias 2/17 Learn More
    $850.00

  • Bryston 6b

    Bryston 6b

    Bryston 6b just in, good condition. three available price is for each these are the high powered older ones... Rated distortion: less than .02% I.M. or THD from 20-20 KHz at rated power or below. Rated power: 500 watts 8 ohms 800 watts 4 ohms 500 watts 2 ohms 800 watts 1 ohm 6400 cm2 of heat sinking, etc. 19" X 5.25" X 13.5", 50 lbs. Learn More
    $860.00

  • Rotel RB-1091

    Rotel RB-1091

    500 watt top of line Only one available.... manual http://www.rotel.com/content/reviews/class%20d%20amplifiers/rb1091-hifinews-ma As new in the original boxes The absolute sound review: http://www.avguide.com/review/rotel-rb-1091-monoblock-amplifier This incredible new Class D amplifier from Rotel is based upon the same ICEpower® technology as utilized in the RMB-1077. The principal difference between the two being that RB-1091 produces a prodigious 500 watts mono into 8 ohms from a 3 5/8" high chassis. Rotel’s new Class D amplifiers are incredibly powerful and stable and will provide increasing amounts of voltage and current down to 4 ohm loads. Manufacturer: Rotel Part Number: RB1091 Specification: Power Configurations (FTC): 1x500 Watts Total Harmonic Distortion (20Hz-20KHz, 8 Ohms): < 0.03% Output Peak Current: 40A Damping Factor (8 Ohms): 400 Frequency Response: 10-40 KHz (±3dB) Signal to Noise Ratio (IHF A): 118 db Learn More
    $999.00

  • Conrad Johnson MF200

    Conrad Johnson MF200

    Conrad Johnson MF200 200 watts/channel solid state $2000 when new, great amp, better than the old Aragons, Bryston 4b etc by a lot Learn More
    $999.00

  • Bryston 4B ST

    Bryston 4B ST

    with xlr jacks 250watt/channel well reviewed Learn More
    $999.00

  • Krell KAV-150a low profile stereo or mono amplifier ALL SOLD!

    Krell KAV-150a low profile stereo or mono amplifier ALL SOLD!

    Krell KAV150a recapped so they sound and work like new. 120 day warranty. ALL SOLD! Learn More
    $999.00

  • Linn AV 5105 Stereo Power Amplifier

    Linn AV 5105 Stereo Power Amplifier

    Linn AV 5105 Stereo Power Amplifier The Linn AV 5105 Stereo Power Amplifier is intended for use in high performance audio and audio/video systems. It combines high output power, ruggedness, and ease of use with our passion for quality. It draws on years of experience of designing and making high quality audio power amplifiers. Inside the compact case are two completely independent electrically isolated channels with fully regulated power supplies giving ‘dual mono’ performance. The signal path is DC coupled and servo controlled for the lowest distortion, cleanest, least colored sound. The output stage is highly derated for cool, reliable operation, and the protection circuitry protects extensively against accidents or abuse. A signal sensing circuit detects the presence of audio above a very low level and turns on the main power supplies to the amplifier, bringing the power amplifier channel from a very low standby power consumption to full operation. It reverts to the standby condition a few minutes after the input signal disappears. This is particularly useful in multi-channel surround sound systems. The AV 5105 accepts the Linn active crossover modules, automatically detecting their presence and switching them in circuit as soon as they are plugged in. This makes playback system upgrades easy. Type Two fully independent channels, isolated from each other and chassis (earth). Fully regulated dual power supplies per channel. Inputs Dual RCA Phono (Line in/out) Outputs Four pairs per channel Protection Fully protected into any load; overload, over-temperature, full short and overdrive protection Remote control Signal-sensing auto switch-on/off for energy conservation or remote operation Output power 100W/channel/8Ω, 200W/Channel/4Ω Input signal 1.05V rms for maximum output Output voltage 28.3V rms maximum Gain x27 (28.6dB) Input impedance 4700Ω Frequency response (-3dB) 2Hz-50kHz Output offset 150μV rms Mains supply 220V–240V T3.15A antisurge, 100V–120V T6.3A antisurge Standby power consumption Learn More
    $999.00

  • Mcintosh MC7100

    Mcintosh MC7100

    Mcintosh MC7100 100 watts/channel 2 available (you can bridge them to 300watts/channel) PERFORMANCE LIMITS Performance limits are the maximum deviation from perfection permitted for a Mclntosh instrument. We promise you that when you purchase a new MC7100 from a Mclntosh Franchised Dealer, it will be capable of performance at or better than these limits. STEREO POWER OUTPUT 150 watts into 4 ohm loads or 100 watts into 8 ohm loads minimum sine wave continuous average power output per channel, both channels operating. The output RMS voltage is: 28.3V across 8 ohms 24.5V across 4 ohms MONOPHONIC (BRIDGED) 300 watts into an 8 ohm load minimum sine wave continuous average power output. The output RMS voltage is: 49 volts across 8 ohms. OUTPUT LOAD IMPEDANCE STEREO 8 or 4 ohms MONOPHONIC 8 ohms RATED POWER BAND 20Hz to 20,000Hz TOTAL HARMONIC DISTORTION 0.005% maximum harmonic distortion at any power level from 250 milliwatts to rated power output. IHF DYNAMIC HEADROOM 8 ohms, 1.7dB 4 ohms, 2.1dB FREQUENCY RESPONSE + 0, -0.25dB from 20Hz to 20.000Hz + 0, -3.0dB from 10Hz to 100,000Hz INPUT SENSITIVITY 1.4 volts (2.5 volts at gain control center detent) A-WEIGHTED SIGNAL-TO-NOISE RATIO 95dB (115dB below rated output) INTERMODULATION DISTORTION. SMPTE 0.005% maximum if instantaneous peak power output does not exceed twice the output power rating. RATINGS WIDE BAND DAMPING FACTOR 8 ohms, 200 4 ohms, 100 INPUT IMPEDANCE 20,000 ohms POWER GUARD Clipping is prevented and THD does not exceed 2% with up to 14dB overdrive at 1000Hz. POWER REQUIREMENTS 120 volts, 50/60HZ, 3.0 amps UL/CSA MECHANICAL SIZE Front panel: 17 1/2 inches (44.5cm) wide, by 3 5/8 inches (9.2cm) high. Chassis: 14 3/4 inches (37.5cm) wide, by 2 3/8 inches (6cm) high, by 14 1/2 inches (36.9cm) deep, (from back of front panel), including connectors. Panel clearance required in front of the mounting surface is 1 inch (2.54cm). FINISH Glass with special gold/teal nomenclature illumination. Chassis and chassis cover are black. WEIGHT 24 pounds (11 Kg) net; 35 pounds (15.9Kg) Only 3 5/8 high Learn More
    $1,150.00

  • Adcom 565 mono pair

    Adcom 565 mono pair

    Adcom 565 mono pair, tested Learn More
    $1,250.00

  • Krell KAV-250a

    Krell KAV-250a

    Krell KAV-250a, more than one available 250watts/channel http://krellonline.com/assets/support/KAV250A3_V992_MAN.pdf http://www.soundandvision.com/content/krell-industries-kav-250a-and-kav-250a3 \two channels driving 8-ohm loads, began clipping at 0.038% distortion and 207.4 watts. The amp reaches 0.1% distortion at 233.2 watts and 1% distortion at 294.8 watts, as shown above. Into 4 ohms, the amp begins clipping at 407.9 watts and reaches 0.1% distortion at 427.3 watts and 1% distortion at 498.7 watts. The amplifier's frequency response was +/-0.16 decibels from 20 hertz to 20 kilohertz. The response only dropped to -0.04 dB at 10 Hz and to -0.88 dB at 50 kHz. Crosstalk was -102.5 dB from left to right at 1 kHz and -97.2 dB from right to left at 1 kHz. THD+N from the amplifier was less than 0.023% at 1 kHz Learn More
    $1,300.00

  • Audio Research D52B

    Audio Research D52B

    solid state amplifier, unused in over 20 years, very nice condition, tech checked 11/16 50 watts per channel minimum RMS (both channels operating) at 8 ohms from 1 Hz to 20 kHz with less than .25% total harmonic distortion. Typically less than .02% at rated power in midband. Approximate actual power available per channel at "clipping" (both ch. op.): 80 (4 ohms), 60 (8 ohms), 35 (16 ohms) Power bandwidth Frequency response 0.05 Hz to 100 Khz (-3 db) Input sensitivity 1.1 Volts RMS for rated power and load. Input impedance 30 Kohms (nominal). Output taps Output regulation Overall negative feedback Damping factor More than 500 at rated power and load (20 Hz to 20 kHz). (Effective internal impedance approximately .012 ohms.) Distortion Intermodulation distortion: Less than .1% at rated output (56.56 V p to p) and load (SMPTE method). THD and IMD both decrease with decreasing output. Slew rate Rise time Hum & noise Wide-band, unweighted, more than 90 dB below 50 watts at 8 ohms - power line components (hum) more than 80 dB below 50 watts at 8 ohms. Power supply energy storage Power requirements 105-120/210-240 VAC, 50/60 Hz, 600 watts maximum. 120 watts at idle. 300 watts at rated power. Other Dimensions 19" (48 cm) W x 5 ¼" (13 cm) H (standard rack mount panel size) x 10 ½ (26.7 cm) D (front panel back). Handles extend 1 ½" (3.8 cm) forward of the front panel. Weight 39 lbs. (17.7 kg) Net, 45 lbs. (20.5 kg) Shipping Learn More
    $1,300.00

  • Mark Levinson ML11

    Mark Levinson ML11

    Mark Levinson ML11 power amplifier . With its 2 x 50W in a small enclosure with the heat sinks hidden inside makes it look shy, but it's not. It another great amplifier of MLAS which is perfect as an all-purpose home hifi amplifier. As the others he can drive almost any load. Specifications Power output: 2 x 50W. Weight: 11Kg Maximum power : 260W. Learn More
    $1,480.00

  • PS Audio Stellar S300   CALL FOR PRICE!  TRADE-IN'S ACCEPTED

    PS Audio Stellar S300 CALL FOR PRICE! TRADE-IN'S ACCEPTED

    PS Audio Stellar S300 CALL FOR PRICE! TRADE-IN'S ACCEPTED (888)850-4366 The Stellar S300 stereo power amplifier is a dual mono power amplifier capable of effortlessly driving demanding loudspeaker loads to concert levels. The perfect choice for just about any loudspeaker, the S300 slips into any system, surprising and delighting even the most discriminating Audiophile. The S300 opens up your musical library in ways you might not have thought possible, revealing nuance and detail covered up by traditional amplifiers. One listen to the S300 and you’ll know you made the right choice. Effortless, rich, spacious—never a hint of glare or aggression—a joy to hear. An amplifier worthy of the PS Audio name. Rated at 140 Watts per channel into 8Ω and 300 Watts per channel into 4Ω, the S300 combines the best of two worlds: ultra linear, high-current, Class D technology for the output stage; a discrete, Class A MOSFET based Analog Cell for the all-important input stage. The S300’s rich, warm, and engaging sonic character comes from the Analog Cell. Its powerful, authoritative control over the loudspeaker stems from its high current, ultra-low impedance Class D output stage. Stellar’s design imperative was to produce a truly musical sounding power amplifier that proudly competed with any amplifier under $5,000. Its designer, PS Audio engineer Darren Myers, took the challenge and set to work on a new concept—a hybrid that would combine the best of today’s technology with time-honored techniques leveraging PS Audio’s forty plus years of experience. The results are extraordinarily musical. Even from the earliest prototype we knew the Stellar power amplifier series was going to be something special. Stellar amplifiers never draw attention to themselves, a rare quality in amplifiers of any price. After hundreds of hours of tuning, voicing, and perfectionist tweaking, we were confident the ends justified the means. Audition the Stellar S300 and you’ll appreciate Myer’s dedication to musical truth without compromise. Learn More

  • PS Audio Stellar M700 mono amplifier  CALL FOR PRICE!  TRADE-IN'S ACCEPTED

    PS Audio Stellar M700 mono amplifier CALL FOR PRICE! TRADE-IN'S ACCEPTED

    PS Audio Stellar M700 mono amplifier CALL FOR PRICE! TRADE-IN'S ACCEPTED The Stellar M700 mono amplifiers are a massively powerful engine capable of effortlessly driving demanding loudspeaker loads to concert levels. Stellar’s best. A pair of these placed on any loudspeaker brings forth the lush, rich and soul-satisfying power of two completely independent power blocks with headroom to spare. One listen to a hugely loud and complex musical passage effortlessly rendered by the M700 pair and you’ll know you made the right choice. Rated at 350 Watts into 8Ω and 700 Watts into 4Ω, the M700 combines the best of two worlds: ultra linear, high-current, Class D technology for the output stage; a discrete, Class A MOSFET based Analog Cell for the all-important input stage. The M700’s rich, warm, and engaging sonic character comes from the Analog Cell. Its powerful, authoritative control over the loudspeaker stems from its high current, ultra-low impedance Class D output stage. Stellar’s design imperative was to produce a truly musical sounding power amplifier that proudly competed with any amplifier under $5,000. Its designer, PS Audio engineer Darren Myers, took the challenge and set to work on a new concept—a hybrid that would combine the best of today’s technology with time-honored techniques leveraging PS Audio’s forty plus years of experience. The results are extraordinarily musical. Even from the earliest prototype we knew the Stellar power amplifier series was going to be something special. Stellar amplifiers never draw attention to themselves, a rare quality in amplifiers of any price. After hundreds of hours of tuning, voicing, and perfectionist tweaking, we were confident the ends justified the means. Audition the Stellar M700 pair and you’ll appreciate Myer’s dedication to musical truth without compromise. Learn More

  • Krell KST100 recapped in black

    Krell KST100 recapped in black

    Krell KST100 recapped for you 2/17 and the other 6/17 0 hours since recap owner's manual: http://www.krellonline.com/assets/support/KST100_MAN.pdf six month parts and labor warranty KST-100 GAIN 26dB, SIGNAL-TO-NOISE 102dB unweighted THD 1K at 8 ohms less than. 1% 20K at 8 ohms less than .3% INPUT IMPEDANCE 47,000 ohms(47K) INPUT SENSITIVITY 1.5 volts for 100 watts out OUTPUT IMPEDANCE ¯ 1 ohms OUTPUT VOLTAGE 80 volts peak to peak 8 ohms OUTPUT POWER All readings are continuous output power, per channel ohms 100 watts ohms 200 watts ohms 400 watts ohm 800 watts DIMENSIONS 18.0" WIDE 14.8" DEEP with handles 6.5" HIGH with feet SHIPPING WEIGHT 60 pounds Learn More
    $1,560.00

  • Pioneer Series 20  M-22
    $1,599.00

  • Mcintosh 2205 new restoration from original owner.

    Mcintosh 2205 new restoration from original owner.

    Mcintosh 2205 just recapped We are currently restoring two examples of the 2205 and a single 2015 amplifier right now. New caps, lubrication, bulbs,etc. Original owner on all. Power output: 200 watts per channel into 8Ω (stereo), 400W into 8Ω (mono) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.1% Damping factor: 16 Input sensitivity: 0.75V Signal to noise ratio: 95dB Speaker load impedance: 1Ω to 8Ω Learn More
    $1,999.00

  • Krell KSA150 recapped

    Krell KSA150 recapped

    Krell KSA150 classic Krell amplifier, Great amp to get into high end audio with. 90 days parts and labor warranty The latest generation of high-resolution source components and speakers places new demands on the power amplifier. The Krell KSA 150 and KSA-250 meet these challenges with fresh design sophistication and long-term value. Both products can drive any speaker with an effortless quality that makes their power seem endless. Extreme clarity is maintained at all power levels. They both utilize Krell refined high-bias Class A and direct-coupled circuitry from input to output. Their power supplies and output stages are massive. High voltage rails with extensive regulation are provided for the input circuitry. All materials and electronic components are of the finest quality and operate within their optimum performance ranges. Virtually all hand wiring has been eliminated, resulting in a dramatic improvement in sonic clarity. The KSA-150 and KSA-250 both utilize Class A circuitry throughout the audio and power supply regulation stages. Class A gain stages deliver excellent sonic performance under diverse conditions because all active components are turned on at all times. This allows each component to operate in its most linear and precise regions. The amplifiers are able to respond to the full range of input signals with equal accuracy. The KSA-150 and the KSA-250 are conservatively rated at 150 and 250 watts per channel into 8 ohms, respectively. The 150 will actually generate 220 watts into 8 ohms, and the 250 will generate 320 watts into 8 ohms. The 8-ohm power ratings do not account for the amplifiers superb sonic performance nor describe their maximum power. The Krell definition of power and the ability to drive low impedances is that the output must double into successively low impedances. The immense power supplies in both products allow them to double their power into one ohm. There are many advances in thermal construction and control circuitry in the KSA -150 and KSA -250. All heat bearing structural components and external heat sinks have been designed in-house to improve thermal tracking and cooling. This construction provides very low thermal resistance between the output transistors and the heat sinks, resulting in superior thermal tracking. It also results in a considerable reduction in overall size. Greater amplifier life expectancy is an added design benefit. Automatic self-adjusting bias and DC offset control circuitry have been developed for the KSA-150 and the KSA-250. These circuits compel the amplifiers to conform to their intended operational parameters under all AC mains conditions. Learn More
    $1,999.00

  • Innersound Electrostatic Amplifier E 300

    Innersound Electrostatic Amplifier E 300

    Innersound Electrostatic Amplifier E 300 Innersound Electrostatic Amplifier Rated power 2000 VA/channel, 20Hz to 20 kHz, both channels driven into an electrostatic speaker of up to 4nF capacity 300 Watts/channel, 20Hz to 20kHz, both channels driven into a resistive 8 ohm load 600 Watts/channel, 20Hz to 20kHz, both channels driven into a resistive 4 ohm load Bandwidth –3dB at 5Hz through 100kHz with single-ended inputs DC through 100kHz with balanced inputs Distortion (THD+Noise) Less than 0.08% from 10Hz to 30kHz at full output, both channels driven Gain 26dB Slew Rate 50 Volts/microsecond Input Impedance 50 kohms unbalanced or 100 kohms balanced Noise Greater than 100dB below rated output Output Impedance 0.4 ohms from 20Hz to 20kHz Dimensions 17"W × 5.5"H × 14"D (43cm W × 14cm H. × 36cm D) Weight 41 pounds (18.5 kg) Learn More
    $2,000.00

  • Krell KAV-2250 in black

    Krell KAV-2250 in black

    Krell KAV-2250 in black Krell owner's manual: http://krellonline.com/assets/support/Krell%20Spreads.pdf Learn More
    $2,000.00

  • Krell KSA100 MK II

    Krell KSA100 MK II

    Krell KSA100 MK II excellent cosmetics, there are some green markings in the picture which were removed. We can ship this in your desired voltage Description provided by highendclassics.com: The Krell KSA-100 Class A poweramplifier was the first stereo amplifier from Krell Audio Industries. At the start of the eighties Connecticut witnessed the birth of another highend audio company within its stateborders: Krell Industies. ‘Class A power to the people’ could have been one of the inspiring thoughts for Daniel D’Agostino chief designer of Krell Industries. Of course there were already some Class A designs in the domain of the power amplifier but most and probably all of them were confined to relatively small powerratings. Even the huge monaural Class A amplifier from Levinson, the ML-2’s, could only muster 30 to 40 Watts of power at 8 Ohms. Other noteworthy low power Class A designs were John Bedini’s 25/25 Class A amp and Jean Hiraga’s ‘Hiraga Classe A’. The only high power Class A amp in those days was a stereo 125 Watt Class A design from the SUMO electric company named ‘The Gold’ designed by James Bongiorno. D’Agostino envisioned and designed an array of high powered Class A amps in which the KSA-100 (abbreviation KSA stands for Krell Stereo Amplifier) was the most powerful stereo amplifier rated at 100 Watts Class A power at 8 Ohms. Technical The KSA-100 is a configuration of two completely separated amps only sharing the same huge chassis. Each amp has its own powersupply (one Avel Lindberg 1250 VA toroidal, two 40,000 uF Sprague or Mallory large cans per channel), driverboard and poweroutputsection. Another so called true dual mono design was the ML-3 from Levinson but this amp was biased in AB mode. To get rid of all the Class A generated heat from the outputsection Krell opted for forced cooling with Papst fans blowing down (the MK II version blew upwards in sync with the natural convection flow of heat) trough circular arranged heatsinks with eight TO3 encased powertransistors per channel attached to it. As a matter of fact the ‘The Gold’ from the SUMO company also used fans to cool down the amp. Using active cooling instead of natural convection kept size and cost in check because huge expansive heatsinks would be needed to drop off the 650 Watts continuous power consumption. Seven years later Krell did make huge convection cooled mono-amps as their reference series (KRS-100 & KRS-200) with the same Class A output but with a significant raise in price and weight compared to the forced cooled versions. Although Krell has always been strongly associated with Class A biasing it’s their ability to drive extremely tough loads, like the renowned amplifier killer the Apogee Scintilla (1 Ohm version) fullrange ribbonspeaker, that really illustrated the kind of DNA a Krell was made of. Only a few other amplifiers in this era, and most of them were amps with low powerratings, could drive speakers at such low impedences. Opening up the “hood ” of the amp gives you a strong visual indication of the ‘brute force’ method used to get an unflappable amp that could drive anything on the market then and today. D’Agostino’s assault on the highend poweramplifier market was very successful worldwide due to these first designs. After Levinson and Threshold, Krell established itself as a strong contender on the highend audio-market. Sound quality This range of first Krell designs redefined the meaning of bass-slam. The KSA-100 sounded much more powerful then it’s relatively modest rating of 100 Watts with acceptable levels of refinement in the middle and high regions of the frequency-spectrum. This stereo-amp is a alround workhouse that was often mated with tube preamplifiers from Audio-Research and Conrad Johnson. Not delicacy and transparancy as the best offerings from Levinson and Threshold but nevertheless highly recommend. Krell KSA-100 Type: 100 Watt class-A stereo power amplifier Introduction: 1981 Discontinued:1987 Power rating (manufacturer) 8 Ohms 100 Watt 4 Ohms 200 Watt 2 Ohms 400 Watt 1 Ohm 800 Watt 0.5 Ohm 1200 Watt Learn More
    $2,100.00

  • Mark Levinson 331 stereo amplifier

    Mark Levinson 331 stereo amplifier

    Levinson 331 Description: Solid-state stereo amplifier. Rated output power, 20Hz–20kHz, with no more than 0.5% THD (FTC): 100Wpc minimum continuous into 8 ohms (20dBW); 200Wpc minimum continuous into 4 ohms (20dBW); 400Wpc continuous into 2 ohms (20dBW). Peak output voltage at rated line voltage: 48V into 8 ohms. Frequency response: 20Hz–20kHz ±1dB. S/N ratio (main output): <–80dB (ref. 1W). Input impedance: 100k ohms balanced, 50k ohms single-ended. Voltage gain: 26.8dB. Input sensitivity (for 2.8V output): 130mV. Input sensitivity (for full output): 1.3V. Output impedance: !x0.05 ohms, 20Hz–20kHz. Damping factor: >800, 20Hz–20kHz into 8 ohms. Power consumption: typically 260W at idle, 110W in standby. Dimensions: 17.56" (446mm) W by 18.85" (479mm) D by 9.3" (232mm) H; faceplate curve depth 1.22" (31mm). Shipping weight: 112 lbs Learn More
    $2,200.00

  • Goldmund A2 modules (original, new gold)

    Goldmund A2 modules (original, new gold)

    Goldmund A2 modules (original, new gold) I purchased these sequential modules from the former Goldmund distributor they are a NOS (new old stock pair) Learn More
    $2,300.00

Grid  List 

Items 1 to 50 of 88 total

Page:
  1. 1
  2. 2
per page