High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

McIntosh MC7100 stereo amplifier Zoom

McIntosh MC7100 stereo amplifier

Be the first to review this product

SKU: mc7100
2 channel stereo amplifier. 150w x 2 into 4 ohms, 100w x 2 into 8 ohms

Availability: In stock

Product Description


    150 watts into 4 ohm loads or 100 watts into 8 ohm loads minimum sine wave continuous average power output per channel,both channels operating.The output RMS voltage is:28.3V across 8 ohms24.5V across 4 ohmsMONOPHONIC (BRIDGED)300 watts into an 8 ohm load minimumsine wave continuous average power output.The output RMS voltage is: 49 volts across8 ohms.OUTPUT LOAD IMPEDANCESTEREO8 or 4 ohmsMONOPHONIC8 ohmsRATED POWER BAND20Hz to 20,000HzTOTAL HARMONIC DISTORTION0.005% maximum harmonic distortion atany power level from 250 milliwatts to ratedpower output.IHF DYNAMIC HEADROOM8 ohms, 1.7dB4 ohms, 2.1dBFREQUENCY RESPONSE+ 0, -0.25dB from 20Hz to 20.000Hz+ 0, -3.0dB from 10Hz to 100,000HzINPUT SENSITIVITY1.4 volts (2.5 volts at gain control centerdetent)A-WEIGHTED SIGNAL-TO-NOISE RATIO95dB (115dB below rated output)INTERMODULATION DISTORTION. SMPTE0.005% maximum if instantaneous peakpower output does not exceed twice the out-put power rating.RATINGSWIDE BAND DAMPING FACTOR8 ohms, 2004 ohms, 100INPUT IMPEDANCE20,000 ohmsPOWER GUARDClipping is prevented and THD does notexceed 2% with up to 14dB overdrive at1000Hz.POWER REQUIREMENTS120 volts, 50/60HZ, 3.0 amps UL/CSAMECHANICALSIZEFront panel: 17 1/2 inches (44.5cm) wide,by 3 5/8 inches (9.2cm) high.Chassis: 14 3/4 inches (37.5cm) wide, by2 3/8 inches (6cm) high, by 14 1/2 inches(36.9cm) deep, (from back of front panel), in-cluding connectors. Panel clearance re-quired in front of the mounting surface is 1inch (2.54cm).
Additional Information

    Additional Information

    Call For Price No
CMS tab