Speakers

Martin Logan Clarity new tweeters just put in 2/21 local pickup in NY, northeast best Learn More

Apogee Acoustics Cepheus 6 Speakers are currently in NY phone (888)850-4366 for delivery options if you're up that way shipping is difficult Heavy, great higher quality at low price Learn More

FLOOR STANDING STEREO/HOME THEATER FRONT/SURROUND MartinLogan Performance On A Budget: Key to Preface’s extraordinary performance is our high-resolution ATF (Advanced Thin Film) driver. Superior in nearly every way to conventional moving-coil transducers (cones and domes) and very similar in most respects to the electrostatics that we’ve always favored, Preface’s ATF driver projects a wonderfully detailed and three-dimensional sound field. Our proprietary Vojtko crossover topology marries the ATF driver to triple high-resolution 6.5-inch woofers with powerfully deep and accurate bass. Learn More

Apogee Diva NIce pair picked up locally from original owner who was moving. They look great (we have put new fabric on them) and test properly. Due to the fragile nature of these, we are listing this as a local pickup only in South Florida. No credit cards or PayPal for this one. All sales are final. Original dark anthracite finish in very good condition. You can always remove the frames and have them sprayed any finish. Learn More

Apogee Studio Grand Have been in storage for last twenty years. Excellent cosmetics Inquire for freight options Learn More

This black pair is in excellent original condition with the boxes. Inquire for a freight quote. Specifications Specifications are subject to change without notice Frequency Response 24–23,000 Hz ±3dB Recommended Amplifier Power 20‒600 watts per channel Horizontal Dispersion 30° Vertical Dispersion 44" (112cm) line source Sensitivity 91 dB/2.83 volts/meter Impedance 4 Ohms, 0.8 at 20kHz. Compatible with 4, 6, or 8 Ohm rated amplifiers. Crossover Frequency 270Hz High Frequency Transducer XStat™ CLS™ electrostatic transducer » Panel Dimensions: 44" × 11.3" (112 × 29cm) » Radiating Area: 497 in2 (3,248 cm2) Low Frequency Transducer Two 10" (25.4cm) cast basket, high excursion, aluminum cone with extended throw drive assembly, non-resonance asymmetrical chamber format Amplifier Woofer: 2 × 200 watts/channel (4 ohms) Components Custom-wound audio transformer, air core coils, polypropylene capacitors Audio Controls ±10dB at 25Hz ±10dB at 50Hz Inputs Custom 5-way binding posts Power Draw Standby: <1W/channel Max: 350W/channel Lighting Control knob to adjust illuminated blue hood logo, back control panel lighting & ground effects lighting Weight 75 lbs. (34 kg) Dimensions 60.9" × 12.7" × 21.3" (154.8cm × 32.2cm × 54cm) I Learn More

Martin Logan Monolith III currently in NYC until 9/24 excellent cosmetics local pickup highly preferred, no boxes. former top of the line. Learn More

Krell EV202 two piece preamplifier factory checked 2025 (I am running Krell factory service) Learn More

Apogee Acoustics Stage Pair with mahogany trim, with hardware and original boxes (must lay flat and ship by truck only) In 11/18 Payment by cash, check or wire. Local pickup preferred. Work great but sold as is. Fragile. Truck only on a pallet if sent out of state. Learn More

Martin Logan Mosaic pair, local pickup in Florida preferred.. No original boxes, must be trucked inquire Learn More

Legendary. original rs1b, Must be crated for shipping. A second set is now available in NY No credit cards for this purchase. All sales final. STOCK DESCRIPTION, DOES NOT REFLECT THE CROSSOVERS THAT ARE PROVIDED WITH THEM The system comes in five sections: two woofer columns, two upper-range columns, and an active crossover and servo control module. Each bass column contains six 8" polypropylene-cone woofers. Each upper-range column contains seven of Infinity's proprietary EMIM ribbon midrange drivers and four EMIT ribbon tweeters (one of them aiming out the rear, of all things!). System crossovers are at 125Hz (nominal), 750Hz, 3kHz, and 8kHz, and the number of operating drivers diminishes as the frequency goes up, to minimize vertical treble beaming due to phase interference (eg, above 8kHz only The RS-1B must be biamplified using its own specific crossover/servo module. This has front panel adjustments for woofer crossover frequency, woofer level, bass contour (rising, flat or rolling off with diminishing frequency), LF range (cutoffs at 22, 30, or 36Hz), and amplifier input impedance. The crossover has amplifying circuitry only in the LF section; the signal fed to the upper-frequency amplifiers is passive (unamplified), so there is virtually no possibility of adding nonlinear distortion components to the signal (footnote 1). Because of this, the turnover frequency of the high-pass section varies according to the input impedance of the HF amplifier. (With a given capacitor in series, the crossover point will rise as amplifier input impedance diminishes. When the front panel impedance switch is set to match that of the higher-frequency amplifier (footnote 2), crossovers will occur at frequencies specified in the instruction manual.) There are also driver level adjustments on the upper-range speaker towers, for "Low Tweeter" (2–5kHz) and "High Tweeter" (8kHz up). It would seem you should be able to get just about any kind of sound from the RS-1Bs you wish, and that proves to be almost the case. The servo function requires an unusual woofer hookup. The woofer columns do not connect directly to their LF driving amplifier, but instead to five-way binding posts on the crossover module. The module, in turn, connects to the LF driving amp. This arrangement allows the device to compare LF amplifier output signals with signals appearing across the speaker terminals, and to cancel out any detected differences (which would represent back-EMF from spurious woofer-cone motions). Learn More

Martin Logan Source, used, black and excellent, no boxes, local pickup preferred Frequency Response 42–22,000 Hz ±3dB Horizontal Dispersion 30° Vertical Dispersion 28" (71cm) line source High Frequency Transducer Generation 2 CLS™ electrostaic transducer » Panel Dimensions 28" × 8.6" (71 × 22cm) » Radiating Area 241 in2 (1,562 cm2) Low Frequency Transducer 8" (20.3cm) high excursion, high-rigidity paper cone with extended throw drive assembly, non-resonance asymmetrical chamber format; bass reflex Sensitivity 90 dB/2.83 volts/meter Impedance 5 Ohms, 1.6 @ 20kHz. Compatible with 4, 6, or 8 Ohm rated amplifiers. Recommended Amplifier Power 20‒400 watts per channel Crossover Frequency 470Hz Components Custom-wound audio transformer, air core coils Inputs Custom 5-way binding posts Weight 47 lbs. (21.4 kg) Dimensions 51.2" × 9.7" × 14.6" (130cm × 24.5cm × 37cm) Learn More

Onix Rocket Strata Mini Tremendous amount of speaker for the money, active subwoofer built in Local pickup only or discuss delivery within Florida or eastern i95 corridor. Do not hit the buy it now button please 3.5 way, 4 driver full range speaker Sealed for midbass, midrange, and tweeter Vented, rear firing for powered subwoofer. 97 lbs each Learn More

Martin Logan CLS II Z upgraded local pickup highly preferred In 12/23 The original owner said he hadn't used these since 1990 (they were too big) I picked them up from his home That should bode well for the panel longetivity. These are legendary speakers for their transparency. Learn More

Magnepan MG 1.4 no boxes, local pickup in Florida preferable. Do not purchase without talking to us The Magnepan MG-1.4 loudspeaker was conceived and designed for perfectionists. One of the most revealing loudspeakers made, it will provide outstanding music reproduction when used with high quality components. Due to the elegant simplicity and ruggedness of the design, the Magneplaner MG-1.4 loudspeakers will give many years of trouble free service. Specifications Type: 2 way, 2 driver loudspeaker system Frequency Response: 40Hz to 18kHz Recommended Amplifier: 100 to 200W Crossover Frequency: 1000Hz Impedance: 5Ω Sensitivity: 87dB Bass: 1 x 428" sq Tweeter: 1 x 68" sq Grille: off white, black, grey fabric Finish: oak trim Dimensions: 22 x 60 x 2 inches Weight: 35lbs Learn More

Martin Logan Prodigy local pickup in HOLLYWOOD FLORIDA Expensive and large . black Learn More

Magnepan MG20.7 speakers are currently at the Magnepan Factory. We can do whatever you desire with them before shipping to you . inquire for freight options Retail is $22000 Learn More

Martin Logan Source Loudspeakers, excellent condition. Local pickup in Florida preferred. Please phone before purchasing Learn More