High Performance Stereo
(0 item) - $0.00

You have no items in your shopping cart.

T+A PA1230R Zoom

T+A PA1230R

Be the first to review this product

SKU: PA1230R
PA1230R Integrated
Amplifier
At a time when many manufacturers are using
microprocessor technology to bury functions
below several software layers so you need to
have an owners’ manual close at hand if you
want to access them, T+A has delivered an
amplifier where each function has its own
control, properly and clearly labelled, on the
front panel. This necessarily means there are
quite a few knobs and buttons, but rarely
has an amplifier been so easy to use. This
is especially the case because the PA1230R
is one of the very few amplifiers available
that allows you to adjust bass and treble
individually for the left and right channels.

Availability: In stock

$2,000.00
Product Description

    Details

    Connection elements GND The ground lead from an analogue disc player is connected here in order to avoid hum. TUNER Input sockets for connecting high-level signal sources such as tuner. CD Input sockets for connecting high-level signal sources such as CD player. AUX 1 General-purpose pre-amplifier inputs with an input sensitivity of 250 mV / 20 kΩ . AUX 2 General purpose pre-amplifier input with an input sensitivity of 250 mV / 20 kΩ . If an MM or MC phono module is fitted then AUX 2 is the phono input. With MM phono module: Input socket for disc players with moving magnet (MM) cartridge systems. Input capacitance (100 pF ... 500 pF) and input sensitivity (1 mV ... 5 mV) variable by means of switches. Simply set the values closest to those stated by the cartridge manufacturer. With MC phono module: Input socket for disc players with moving coil (MC) cartridge systems. Input impedance (5 Ω ... 650 Ω ) and input sensitivity (50 uV ... 1000 uV) variable by means of switches. Simply set the values closest to those stated by the cartridge manufacturer. TAPE 1 Input and output sockets for connecting devices which can record and play back (recorders). PA 1230 R TAPE 2 Input and output sockets for connecting devices which can record and play back (recorders). The input is equipped with an input buffer to be connected to source units with high output impedance (>1kΩ ). TV Input sockets for connecting high-level signal sources such as TV or VCR. The input is equipped with an input buffer to be connected to source units with high output impedance (>1 kΩ ). PRE Variable asymmetrical pre-amplifier output fitted with cinch sockets. As this is a very low impedance output it is suitable for long leads (e.g. to connect active speakers). SPEAKER A + B Two pairs of loudspeakers can be connected to the amplifier (SPEAKER A and SPEAKER RC-IN Input socket for the E 2000 remote control receiver. RC-OUT The remote control signals are transferred to the source devices via the remote control leads RZ 001, which are plugged into the RC-OUT sockets. RLink Control output – preparation to control futur "R"-system components with extendend functions. A software update may be necessary. TASI Connection to T+A Surround decoder. Specifications Pre-amplifier Frequency response + 0 – 3 dB 0,5 Hz – 400 kHz Signal: noise ratios (A-weighted) High level 87 x 104 / 109 dB Phono MM 82 / 86 dB (Non-standard version) MC 78 / 82 dB (Non-standard version) Sub-sonic filter fixed (Non-standard version) Total harmonic distortion < 0,001 % Intermodulation < 0,001 % Channel separation > 90 dB Nominal input sensitivity High level 250 mV / 20 kOhms MM 1 – 5 mV 16 capacitances MC 60 – 1000 uV 16 impedances Outputs Headphones 50 Ohms 2 x Tape 250 mV / 100 Ohms PRE out Cinch nominal 1 V eff max. 9,5 V eff Impedance 22 Ohms Dolby surround interface with fixed level (TASI) present Output stage Nominal output 8 Ohms 100 Watt per channel 4 Ohms 150 Watt T+A - Produktarchiv PA 1230 R Peak output 8 Ohms 150 Watt 4 Ohms 290 Watt Power bandwidth 1 Hz – 300 kHz Frequency response + 0 – 3 dB 1 Hz – 400 kHz Slew rate 60 V/us Damping factor > 500 Signal: noise ratio (A weighted) > 110 dB Total harmonic distortion < 0,002 % Reservoir capacity 50000 uF Mains supply 110 V or 220 / 240 V, 50 Hz 300 VA Dimensions 7,5 x 44 x 39 cm
Additional Information

    Additional Information

    Call For Price No
CMS tab